Breaking the waypoint into multiple fligth to cope with flight duration.

[scw-bt]

When I design a waypoint, sometime, the flight time is exceeding 30 minutes, which is considered as the maximal time for safe flight for DJI Air 3 due to large coverage area. Maybe add an option for "preferred flight duration", let said 30, 25, or 20 minutes, and if the flight plan is exceeding flight time, it will automatically break into 2 different kmz file. This will enable us to map for a much larger area.

[YarosMallorca]

Sure, I have to check this, never tested with a large enough area. Does the error come up when loading the mission in DJI Fly or during flight?

Additionally, I noticed some changes in the waypoint engine in DJI Fly 1.17.0 which might break missions created by this software, so do not update for now.

[scw-bt]

Sorry for late reply. Actually, i hope that the software can automatically break the flight into multiple section of 25 or 30 minutes, thus, when we fly, we can just select kmz1, kmz2, kmz3 flight and so on, thus no need worry about the battery, remaining flight time and so on.

To simplify it, let say i select and area that require 60 minutes flight time (estimated), the software can automatically break it into 3 flight section of 20 minutes each, so user can change battery, and start flight 1, change battery, start flight 2, change battery, start flight 3 and then it is done. When back to PC, just use all three set files to start map construction.