Select device but Device was not found

[anzhefun]

I tried using automatic settings
But the device was not found
Follow the steps step by step, and you can also see AirMX devices in MQTT EXPLORER
The device access can also be seen in the AIRMX ADDON log
But there is still an error when adding the device
“Device was not found”

• Serving Flask app 'i-airmx-cn'
• Debug mode: off
  WARNING: This is a development server. Do not use it in a production deployment. Use a production WSGI server instead.
• Running on all addresses (0.0.0.0)
• Running on http://127.0.0.1:80
• Running on http://172.30.33.0:80
  Press CTRL+C to quit
  172.30.32.1 - - [17/Dec/2024 02:17:50] "GET /_devices HTTP/1.1" 200 -
  172.30.32.1 - - [17/Dec/2024 02:17:52] "GET /_devices HTTP/1.1" 200 -
  172.30.32.1 - - [17/Dec/2024 02:17:52] "GET /_devices HTTP/1.1" 200 -
  172.30.32.1 - - [17/Dec/2024 02:17:53] "GET /_devices HTTP/1.1" 200 -
  172.30.32.1 - - [17/Dec/2024 02:17:53] "GET /_devices HTTP/1.1" 200 -
  172.30.32.1 - - [17/Dec/2024 02:17:53] "GET /_devices HTTP/1.1" 200 -
  172.30.32.1 - - [17/Dec/2024 02:17:53] "GET /_devices HTTP/1.1" 200 -
  172.30.32.1 - - [17/Dec/2024 02:17:54] "GET /_devices HTTP/1.1" 200 -
  172.30.32.1 - - [17/Dec/2024 08:50:22] "GET /_devices HTTP/1.1" 200 -
  172.30.32.1 - - [17/Dec/2024 08:50:26] "GET /_devices HTTP/1.1" 200 -
  172.30.32.1 - - [17/Dec/2024 08:50:26] "GET /_devices HTTP/1.1" 200 -
  172.30.32.1 - - [17/Dec/2024 08:50:27] "GET /_devices HTTP/1.1" 200 -
  172.30.32.1 - - [17/Dec/2024 08:50:28] "GET /_devices HTTP/1.1" 200 -
  172.30.32.1 - - [17/Dec/2024 08:50:28] "GET /_devices HTTP/1.1" 200 -
  172.30.32.1 - - [17/Dec/2024 08:50:28] "GET /_devices HTTP/1.1" 200 -
  172.30.32.1 - - [17/Dec/2024 08:50:29] "GET /_devices HTTP/1.1" 200 -
  172.30.32.1 - - [17/Dec/2024 08:50:29] "GET /_devices HTTP/1.1" 200 -
  172.30.32.1 - - [17/Dec/2024 08:50:29] "GET /_devices HTTP/1.1" 200 -
  192.168.50.150 - - [17/Dec/2024 11:33:44] "GET /gettime HTTP/1.1" 200 -
  192.168.50.150 - - [17/Dec/2024 11:33:44] "GET /gettime HTTP/1.1" 200 -
  2024-12-17 11:33:45: New connection from 192.168.50.150:65454 on port 1883.
  2024-12-17 11:33:45: Client AW_44332 already connected, closing old connection.
  2024-12-17 11:33:45: New client connected from 192.168.50.150:65454 as AW_44332 (p2, c0, k30, u'aw_44332').

[dext0r]

Please reset device, then show addon logs.

[anzhefun]

s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info: service fix-attrs: starting
s6-rc: info: service fix-attrs successfully started
s6-rc: info: service legacy-cont-init: starting
s6-rc: info: service legacy-cont-init successfully started
s6-rc: info: service legacy-services: starting
services-up: info: copying legacy longrun i-airmx-cn (no readiness notification)
services-up: info: copying legacy longrun mosquitto (no readiness notification)
s6-rc: info: service legacy-services successfully started
2024-12-18 23:18:21: mosquitto version 2.0.18 starting
2024-12-18 23:18:21: Config loaded from /etc/mosquitto/mosquitto.conf.
2024-12-18 23:18:21: Opening ipv4 listen socket on port 1883.
2024-12-18 23:18:21: mosquitto version 2.0.18 running

• Serving Flask app 'i-airmx-cn'
• Debug mode: off
  WARNING: This is a development server. Do not use it in a production deployment. Use a production WSGI server instead.
• Running on all addresses (0.0.0.0)
• Running on http://127.0.0.1:80
• Running on http://172.30.33.0:80
  Press CTRL+C to quit
  192.168.50.150 - - [18/Dec/2024 23:24:53] "GET /gettime HTTP/1.1" 200 -
  192.168.50.150 - - [18/Dec/2024 23:24:53] "GET /gettime HTTP/1.1" 200 -
  2024-12-18 23:24:53: New connection from 192.168.50.150:49575 on port 1883.
  2024-12-18 23:24:53: New client connected from 192.168.50.150:49575 as AW_44332 (p2, c0, k30, u'aw_44332').

[anzhefun]

The virtual machine I am using does not conflict with other device ports
So the port I set directly to 80/1883 hijacked the domain name on the router and the webpage MQTT EXPLORER can provide normal link prompts

[dext0r]

192.168.50.150 - - [18/Dec/2024 23:24:53] "GET /gettime HTTP/1.1" 200 -
192.168.50.150 - - [18/Dec/2024 23:24:53] "GET /gettime HTTP/1.1" 200 -

There is not registration request from the device. Did you reset it by holding Power + Refill buttons for 3 seconds?

[anzhefun]

Done, open AirMX in the HA interface again and use AirMX AP to reset the device network. It can now be used normally. See if further updates are needed in the tutorial (or if the Chinese version requires special emphasis)