arm64: dts: mediatek: mt7988a: Fix PCI-Express T-PHY node address

The PCIe and USB TPHYs are under the soc bus, which provides MMIO,
and all nodes under that must use the bus, otherwise those would
clearly be out of place.

Add ranges to both the tphy(s) and assign the address to the main
node to silence a dtbs_check warning, and fix the children to
use the MMIO range of t-phy.

Fixes: ("f693e6ba55ae arm64: dts: mediatek: mt7988: Add t-phy for ssusb1")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Author: AngeloGioacchino Del Regno

arch/arm64/boot/dts/mediatek/mt7988a.dtsi

@@ -685,20 +685,20 @@
 		tphy: t-phy@11c50000 {
 			compatible = "mediatek,mt7986-tphy",
 				     "mediatek,generic-tphy-v2";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11c50000 0x1000>;
 			status = "disabled";
 
-			tphyu2port0: usb-phy@11c50000 {
-				reg = <0 0x11c50000 0 0x700>;
+			tphyu2port0: usb-phy@0 {
+				reg = <0 0x700>;
 				clocks = <&infracfg CLK_INFRA_USB_UTMI_CK_P1>;
 				clock-names = "ref";
 				#phy-cells = <1>;
 			};
 
-			tphyu3port0: usb-phy@11c50700 {
-				reg = <0 0x11c50700 0 0x900>;
+			tphyu3port0: usb-phy@700 {
+				reg = <0x700 0x900>;
 				clocks = <&infracfg CLK_INFRA_USB_PIPE_CK_P1>;
 				clock-names = "ref";
 				#phy-cells = <1>;
@@ -715,20 +715,20 @@
 		xsphy: xs-phy@11e10000 {
 			compatible = "mediatek,mt7988-xsphy",
 				     "mediatek,xsphy";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11e10000 0x3900>;
 			status = "disabled";
 
-			xphyu2port0: usb-phy@11e10000 {
-				reg = <0 0x11e10000 0 0x400>;
+			xphyu2port0: usb-phy@0 {
+				reg = <0 0x400>;
 				clocks = <&infracfg CLK_INFRA_USB_UTMI>;
 				clock-names = "ref";
 				#phy-cells = <1>;
 			};
 
-			xphyu3port0: usb-phy@11e13000 {
-				reg = <0 0x11e13400 0 0x500>;
+			xphyu3port0: usb-phy@3400 {
+				reg = <0x3400 0x500>;
 				clocks = <&infracfg CLK_INFRA_USB_PIPE>;
 				clock-names = "ref";
 				#phy-cells = <1>;