components.Component.json

[{
  "_id": {
    "$oid": "67eba31df80a625c1efcecd7"
  },
  "name": "T3902",
  "manufacturer": "TDK",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "DATA",
      "description": "Digital Output Signal (DATA1 or DATA2)"
    },
    {
      "number": "2",
      "name": "SELECT",
      "description": "Left Channel or Right Channel Select:\nDATA 1 (right): SELECT tied to GND\nDATA 2 (left):  SELECT tied to VDD. In this setting, SELECT should be tied to the same voltage\nsource as the VDD pin."
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "CLK",
      "description": "Clock Input to Microphone"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Power Supply. For best performance and to avoid potential parasitic artifacts, place a 0.1 µF\n(100 nF) ceramic type X7R capacitor between Pin 5 (VDD) and ground. Place the capacitor as\nclose to Pin 5 as possible.  "
    }
  ],
  "version": "1.0",
  "url": "https://invensense.tdk.com/wp-content/uploads/2020/05/DS-000357-T3902-v1.0.pdf",
  "pages": "10"
},
{
  "_id": {
    "$oid": "67eba65af80a625c1efcecdd"
  },
  "name": "mp34dt05_a-1850143",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "2",
      "name": "LR",
      "description": "Left/Right channel selection"
    },
    {
      "number": "3",
      "name": "CLK",
      "description": "Synchronization input clock"
    },
    {
      "number": "4",
      "name": "DOUT",
      "description": "Left/Right PDM data output"
    },
    {
      "number": "5 (ground ring)",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "Rev 4",
  "url": "https://eu.mouser.com/datasheet/2/389/mp34dt05_a-1850143.pdf",
  "pages": "2"
},
{
  "_id": {
    "$oid": "67eba4b9f80a625c1efcecda"
  },
  "name": "IM72D128V01",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "DATA",
      "description": "PDM data output"
    },
    {
      "number": "2",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "3",
      "name": "CLOCK",
      "description": "PDM clock input"
    },
    {
      "number": "4",
      "name": "SELECT",
      "description": "PDM left/right select"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "1.01",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM72D128_DataSheet_v01_01_EN-3362541.pdf",
  "pages": "11"
},
{
  "_id": {
    "$oid": "67eba5e4f80a625c1efcecdc"
  },
  "name": "CMM-2718AB-38108-TR",
  "manufacturer": "Same Sky",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "Output",
      "description": ""
    },
    {
      "number": "2",
      "name": "GND",
      "description": ""
    },
    {
      "number": "3",
      "name": "VDD",
      "description": ""
    },
    {
      "number": "4",
      "name": "GND",
      "description": ""
    }
  ],
  "version": "09/11/2024",
  "url": "https://eu.mouser.com/datasheet/2/1628/cmm_2718ab_38108_tr-3508812.pdf",
  "pages": "2"
},
{
  "_id": {
    "$oid": "67eba27ef80a625c1efcecd6"
  },
  "name": "SPH0655LM4H-1",
  "manufacturer": "Knowles",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "DATA",
      "description": "PDM Output"
    },
    {
      "number": "2",
      "name": "SELECT",
      "description": "Lo/Hi (L/R) Select. Connect to VDD or GND."
    },
    {
      "number": "3",
      "name": "GROUND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "CLOCK",
      "description": "Clock Input"
    },
    {
      "number": "5",
      "name": "Vdd",
      "description": "Power Supply"
    }
  ],
  "version": "Rev D",
  "url": "https://eu.mouser.com/datasheet/2/218/sph0655lm4h_1_cornell_ii_datasheet-3312993.pdf",
  "pages": "8"
},
{
  "_id": {
    "$oid": "67eba43df80a625c1efcecd9"
  },
  "name": "IM72D128VV01",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "DATA",
      "description": "PDM data output"
    },
    {
      "number": "2",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "3",
      "name": "CLOCK",
      "description": "PDM clock input"
    },
    {
      "number": "4",
      "name": "LR",
      "description": "PDM left/right select"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "1.0",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM72D128V_DataSheet_v01_00_EN-3536326.pdf",
  "pages": "12"
},
{
  "_id": {
    "$oid": "67eb9e4af80a625c1efceccf"
  },
  "name": "SPV0142LR5H-1 FORD 2",
  "manufacturer": "Knowles",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "Vdd",
      "description": "Power Supply"
    },
    {
      "number": "2",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GROUND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "No Connect",
      "description": "Test Pin - do not place over ground plane"
    }
  ],
  "version": "Rev D",
  "url": "https://eu.mouser.com/datasheet/2/218/spv0142lr5h_1_ford_2_datasheet_2-3313012.pdf",
  "pages": "5"
},
{
  "_id": {
    "$oid": "67eba39ff80a625c1efcecd8"
  },
  "name": " ICS‐40618",
  "manufacturer": "TDK",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "OUTPUT+",
      "description": "Analog Output Signal+"
    },
    {
      "number": "2",
      "name": "Output-",
      "description": "Analog Output Signal-"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "Ground",
      "description": "Ground"
    },
    {
      "number": "5",
      "name": "Vdd",
      "description": "Power Supply"
    }
  ],
  "version": "1.0",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sw_piezo/mic/mems-mic/data_sheet/ds-000044-ics-40618-v1.0.pdf?ref_disty=mouser",
  "pages": "7"
},
{
  "_id": {
    "$oid": "67eba56bf80a625c1efcecdb"
  },
  "name": "CMM-4030DT-26154-TR",
  "manufacturer": "Same Sky",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": ""
    },
    {
      "number": "2",
      "name": "L/R",
      "description": ""
    },
    {
      "number": "3",
      "name": "CLOCK",
      "description": ""
    },
    {
      "number": "4",
      "name": "DATA",
      "description": ""
    },
    {
      "number": "5",
      "name": "GND",
      "description": ""
    },
    {
      "number": "6",
      "name": "GND",
      "description": ""
    },
    {
      "number": "7",
      "name": "GND",
      "description": ""
    },
    {
      "number": "8",
      "name": "GND",
      "description": ""
    }
  ],
  "version": "09/11/2024",
  "url": "https://eu.mouser.com/datasheet/2/1628/cmm_4030dt_26154_tr-3509195.pdf",
  "pages": "3"
},
{
  "_id": {
    "$oid": "67eba6aef80a625c1efcecde"
  },
  "name": "MP23DB02MM",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "DOUT",
      "description": "Left/right PDM data output"
    },
    {
      "number": "2",
      "name": "L/R",
      "description": "Left/right channel selection"
    },
    {
      "number": "3 (ground ring)",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "4",
      "name": "CLK",
      "description": "Synchronization input clock"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    }
  ],
  "version": "Rev 3",
  "url": "https://eu.mouser.com/datasheet/2/389/mp23db02mm-2956117.pdf",
  "pages": "2"
},
{
  "_id": {
    "$oid": "67ec08228c83c2d73799fd43"
  },
  "name": "LSM303AH",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCL / SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable,\nI2C/SPI mode selection,\n1: SPI idle mode / I2C communication enabled,\n0: SPI communication mode / I2C disabled"
    },
    {
      "number": "3",
      "name": "Reserved",
      "description": "Reserved, connected to GND"
    },
    {
      "number": "4",
      "name": "SDA, SDI, SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data ouput (SDO)"
    },
    {
      "number": "5",
      "name": "C1",
      "description": "Capacitor connection (C1 = 220 nF)"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V"
    },
    {
      "number": "7",
      "name": "INT_MAG/DRDY",
      "description": "Magnetometer interrupt/data-ready signal"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V"
    },
    {
      "number": "9",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2_XL",
      "description": "Accelerometer interrupt 2"
    },
    {
      "number": "12",
      "name": "INT1_XL",
      "description": "Accelerometer interrupt 1"
    }
  ],
  "version": "Rev 7",
  "url": "https://www.mouser.com/datasheet/2/389/lsm303ah-1849705.pdf",
  "pages": "12"
},
{
  "_id": {
    "$oid": "67f51d839a2431d66f0bee08"
  },
  "name": "ICS‐40638",
  "manufacturer": "TDK",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "OUTPUT+",
      "description": "Analog Output Signal+"
    },
    {
      "number": "2",
      "name": "OUTPUT−",
      "description": "Analog Output Signal−"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Power Supply"
    }
  ],
  "version": "1.1",
  "url": "https://www.mouser.com/catalog/specsheets/TDK_DS-000281-ICS-40638-v1.1.pdf?_gl=1*tkxa59*_gcl_au*OTkxMjczMDQ1LjE3NDQxMTY4Mzg.*_ga*NDQ4NTkwODM3LjE3NDQxMTY4MzM.*_ga_15W4STQT4T*MTc0NDExNjgzMi4xLjEuMTc0NDExNjkwMC41Mi4wLjA.",
  "pages": "6"
},
{
  "_id": {
    "$oid": "67f51ee89a2431d66f0bee09"
  },
  "name": "ICS‐41350",
  "manufacturer": "TDK",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "DATA",
      "description": "Digital Output Signal (DATA1 or DATA2)"
    },
    {
      "number": "2",
      "name": "SELECT",
      "description": "Left Channel or Right Channel Select:\nDATA 1 (right): SELECT tied to GND\nDATA 2 (left):  SELECT tied to VDD. In this setting, SELECT should be tied to the same voltage\nsource as the VDD pin.  "
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "CLK",
      "description": "Clock Input to Microphone"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Power Supply. For best performance and to avoid potential parasitic artifacts, place a 0.1 µF\n(100 nF) ceramic type X7R capacitor between Pin 5 (VDD) and ground. Place the capacitor as\nclose to Pin 5 as possible.  "
    }
  ],
  "version": "1.1",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sw_piezo/mic/mems-mic/data_sheet/ds-000047-ics-41350-v1.1.pdf",
  "pages": "10"
},
{
  "_id": {
    "$oid": "67f522299a2431d66f0bee0a"
  },
  "name": "SPU0414HR5H-SB",
  "manufacturer": "Knowles",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "2",
      "name": "GROUND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "GAIN",
      "description": "Connect resistor to set gain"
    },
    {
      "number": "4",
      "name": "OUTPUT",
      "description": "Output Signal"
    }
  ],
  "version": "Revision E",
  "url": "https://eu.mouser.com/datasheet/2/218/Knowles_Corporation_SPU0414HR5H_SB_7-2308992.pdf",
  "pages": "5"
},
{
  "_id": {
    "$oid": "67f524019a2431d66f0bee0d"
  },
  "name": "INMP621",
  "manufacturer": "TDK",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "CLK",
      "description": "Clock Input to Microphone"
    },
    {
      "number": "2",
      "name": "L/R SELECT",
      "description": "Left Channel or Right Channel Select:\nDATA 1 (right): L/R SELECT tied to GND\nDATA 2 (left): L/R SELECT tied to VDD "
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "VDD",
      "description": "Power Supply. For best performance and to avoid potential parasitic artifacts, place a 0.1 µF\n(100 nF) ceramic type X7R capacitor between Pin 4 (VDD) and ground. Place the capacitor as\nclose to Pin 4 as possible."
    },
    {
      "number": "5",
      "name": "DATA",
      "description": "Digital Output Signal (DATA1 or DATA2)"
    }
  ],
  "version": "1.3",
  "url": "https://invensense.tdk.com/wp-content/uploads/2019/09/INMP621_v1.3.pdf",
  "pages": "8"
},
{
  "_id": {
    "$oid": "67f5255c9a2431d66f0bee0e"
  },
  "name": "ICS‐40212",
  "manufacturer": "TDK",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "OUTPUT",
      "description": "Analog Output Signal"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Power Supply"
    }
  ],
  "version": "1.3",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sw_piezo/mic/mems-mic/data_sheet/ds-000126-ics-40212-v1.3.pdf",
  "pages": "7"
},
{
  "_id": {
    "$oid": "67f660d59a2431d66f0bee0f"
  },
  "name": "T5837",
  "manufacturer": "TDK",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "DATA",
      "description": "Digital Output Signal (DATA1 or DATA2)"
    },
    {
      "number": "2",
      "name": "SELECT",
      "description": "Left Channel or Right Channel Select:\nDATA 1 (right): SELECT tied to GND\nDATA 2 (left): SELECT tied to VDD. In this setting, SELECT should be tied to the same voltage\nsource as the VDD pin."
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "NC",
      "description": "No Connect Pin, can be floated or connected to Gnd"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "No Connect Pin, can be floated or connected to Gnd"
    },
    {
      "number": "6",
      "name": "CLK",
      "description": "Clock Input to Microphone"
    },
    {
      "number": "7",
      "name": "VDD",
      "description": "Power Supply. For best performance and to avoid potential parasitic artifacts, place a 0.1 µF\n(100 nF) ceramic type X7R capacitor between Pin 7 (VDD) and ground. Place the capacitor as\nclose to Pin 7 as possible."
    }
  ],
  "version": "1.1",
  "url": "https://www.mouser.com/catalog/specsheets/TDK_DS-000447-T5837-v1.1.pdf?_gl=1*8b4ipw*_gcl_au*MTYyMDE4MzAyMy4xNzQ0MTE2ODA5*_ga*NDQ4NTkwODM3LjE3NDQxMTY4MzM.*_ga_15W4STQT4T*MTc0NDE5OTU1My4yLjAuMTc0NDE5OTU1NS41OC4wLjA.",
  "pages": "9"
},
{
  "_id": {
    "$oid": "67f661969a2431d66f0bee10"
  },
  "name": "IM69D127V11",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "DATA",
      "description": "PDM data output"
    },
    {
      "number": "2",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "3",
      "name": "CLOCK",
      "description": "PDM clock input"
    },
    {
      "number": "4",
      "name": "SELECT",
      "description": "PDM left/right select"
    },
    {
      "number": "5",
      "name": "GROUND",
      "description": "Ground"
    }
  ],
  "version": "v01_10",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM69D127_DataSheet_v01_00_EN-3082823.pdf",
  "pages": "11"
},
{
  "_id": {
    "$oid": "67f6622a9a2431d66f0bee11"
  },
  "name": "IM67D130A",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "DATA",
      "description": "PDM data output"
    },
    {
      "number": "2",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "3",
      "name": "CLOCK",
      "description": "PDM clock input"
    },
    {
      "number": "4",
      "name": "LR",
      "description": "PDM left/right select"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "Rev 1.00",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM67D130A_DataSheet_v01_00_EN-2584169.pdf",
  "pages": "6"
},
{
  "_id": {
    "$oid": "67f662889a2431d66f0bee12"
  },
  "name": "IM63D135A",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "2",
      "name": "CLK",
      "description": "PDM clock input"
    },
    {
      "number": "3",
      "name": "DATA",
      "description": "PDM data output"
    },
    {
      "number": "4",
      "name": "LR",
      "description": "PDM left/right select"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "Rev. 1.00",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_09_24_2024_Infineon_IM63D135A_DS_v1_00_EN-3512254.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "67f662d99a2431d66f0bee13"
  },
  "name": "IM64A130A",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "Rev. 1.10",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM64A130A_DataSheet_v01_10_EN-3445888.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "67f663479a2431d66f0bee14"
  },
  "name": "IM64D121A",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "2",
      "name": "CLK",
      "description": "PDM clock input"
    },
    {
      "number": "3",
      "name": "DATA",
      "description": "PDM data output"
    },
    {
      "number": "4",
      "name": "LR",
      "description": "PDM left/right select"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "Rev. 1.10",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM64D121A_DataSheet_v01_10_EN-3445890.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "67f6640e9a2431d66f0bee15"
  },
  "name": "IM64D130A",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "2",
      "name": "CLK",
      "description": "PDM clock input"
    },
    {
      "number": "3",
      "name": "DATA",
      "description": "PDM data output"
    },
    {
      "number": "4",
      "name": "LR",
      "description": "PDM left/right select"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "Rev. 1.10",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM64D130A_DataSheet_v01_10_EN-3445889.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "67f664779a2431d66f0bee16"
  },
  "name": "IM66D120A",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "2",
      "name": "CLK",
      "description": "PDM clock input"
    },
    {
      "number": "3",
      "name": "DATA",
      "description": "PDM data output"
    },
    {
      "number": "4",
      "name": "LR",
      "description": "PDM left/right select"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "Rev. 1.00",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM66D120A_DataSheet_v01_00_EN-3392507.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "67f664d49a2431d66f0bee17"
  },
  "name": "IM66D130A",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "2",
      "name": "CLK",
      "description": "PDM clock input"
    },
    {
      "number": "3",
      "name": "DATA",
      "description": "PDM data output"
    },
    {
      "number": "4",
      "name": "LR",
      "description": "PDM left/right select"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "Rev. 1.00",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM66D130A_DataSheet_v01_00_EN-3392491.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "67f665409a2431d66f0bee18"
  },
  "name": "IM68A130A",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "Rev. 1.0.0",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM68A130A_DataSheet_v01_00_EN-3362124.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "67f666269a2431d66f0bee1a"
  },
  "name": "IM68A130V01",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "Output",
      "description": "Microphone output"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "1.10",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM68A130_DataSheet_v01_10_EN-3421330.pdf",
  "pages": "9"
},
{
  "_id": {
    "$oid": "67f6667d9a2431d66f0bee1b"
  },
  "name": "IM69D128SV01",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "2",
      "name": "CLOCK",
      "description": "PDM clock input"
    },
    {
      "number": "3",
      "name": "DATA",
      "description": "PDM data output"
    },
    {
      "number": "4",
      "name": "LR select",
      "description": "PDM left/right select"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "1.01",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM69D128S_DataSheet_v01_00_EN-3107551.pdf",
  "pages": "11"
},
{
  "_id": {
    "$oid": "67f666e49a2431d66f0bee1c"
  },
  "name": "IM70A135V01",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "Output+",
      "description": "Differential Output+"
    },
    {
      "number": "4",
      "name": "Output-",
      "description": "Differential Output-"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "1.00",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM70A135_DataSheet_v01_00_EN-3159538.pdf",
  "pages": "10"
},
{
  "_id": {
    "$oid": "67f667429a2431d66f0bee1d"
  },
  "name": "IM70D122V01",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "2",
      "name": "CLOCK",
      "description": "PDM clock input"
    },
    {
      "number": "3",
      "name": "DATA",
      "description": "PDM data output"
    },
    {
      "number": "4",
      "name": "LR select",
      "description": "PDM left/right"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "1.01",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM70D122_DataSheet_v01_00_EN-3107506.pdf",
  "pages": "12"
},
{
  "_id": {
    "$oid": "67f667959a2431d66f0bee1e"
  },
  "name": "IM73D122V01",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "DATA",
      "description": "PDM data output"
    },
    {
      "number": "2",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "3",
      "name": "CLOCK",
      "description": "PDM clock input"
    },
    {
      "number": "4",
      "name": "LR",
      "description": "PDM left/right select"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "1.00",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM73D122_DataSheet_v01_00_EN-3082828.pdf",
  "pages": "11"
},
{
  "_id": {
    "$oid": "67f668579a2431d66f0bee1f"
  },
  "name": "IM69D120",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "DATA",
      "description": "PDM data output"
    },
    {
      "number": "2",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "3",
      "name": "CLOCK",
      "description": "PDM clock input"
    },
    {
      "number": "4",
      "name": "SELECT",
      "description": "PDM left/right select"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "1.0",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM69D120_DataSheet_v01_00_EN-3362071.pdf",
  "pages": "12"
},
{
  "_id": {
    "$oid": "67f668f59a2431d66f0bee20"
  },
  "name": "IM67D120A",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "DATA",
      "description": "PDM data output"
    },
    {
      "number": "2",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "3",
      "name": "CLOCK",
      "description": "PDM clock input"
    },
    {
      "number": "4",
      "name": "LR",
      "description": "PDM left/right select"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "Rev 1.00",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM67D120A_DataSheet_v01_00_EN-2888253.pdf",
  "pages": "6"
},
{
  "_id": {
    "$oid": "67f6698c9a2431d66f0bee21"
  },
  "name": "IM69D130",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "DATA",
      "description": "PDM data output"
    },
    {
      "number": "2",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "3",
      "name": "CLOCK",
      "description": "PDM clock input"
    },
    {
      "number": "4",
      "name": "SELECT",
      "description": "PDM left/right select"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "1.0",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM69D130_DataSheet_v01_00_EN-3361969.pdf",
  "pages": "12"
},
{
  "_id": {
    "$oid": "67f66a0d9a2431d66f0bee22"
  },
  "name": "IM73A135V01",
  "manufacturer": "Infineon",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "Output+",
      "description": "Differential Output+"
    },
    {
      "number": "2",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "3",
      "name": "Output-",
      "description": "Differential Output-"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "V 1.20",
  "url": "https://eu.mouser.com/datasheet/2/196/Infineon_IM73A135_DataSheet_v01_00_EN-3362628.pdf",
  "pages": "11"
},
{
  "_id": {
    "$oid": "67f66c5a9a2431d66f0bee23"
  },
  "name": "IMP23ABSU",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "Out",
      "description": "Output"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "GND"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "GND"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "GND"
    },
    {
      "number": "5",
      "name": "Vdd",
      "description": "Supply voltage"
    }
  ],
  "version": "Rev 2",
  "url": "https://eu.mouser.com/datasheet/2/389/imp23absu-1901517.pdf",
  "pages": "2"
},
{
  "_id": {
    "$oid": "67f66cc39a2431d66f0bee24"
  },
  "name": "IMP34DT05",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "2",
      "name": "LR",
      "description": "Left/Right channel selection"
    },
    {
      "number": "3",
      "name": "CLK",
      "description": "Synchronization input clock"
    },
    {
      "number": "4",
      "name": "DOUT",
      "description": "Left/Right PDM data output"
    },
    {
      "number": "5 (ground ring)",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "2",
  "url": "https://eu.mouser.com/datasheet/2/389/imp34dt05-1849335.pdf",
  "pages": "2"
},
{
  "_id": {
    "$oid": "67f66d259a2431d66f0bee25"
  },
  "name": "MP23ABS1",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "Out",
      "description": "Output"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "GND"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "GND"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "GND"
    },
    {
      "number": "5",
      "name": "Vdd",
      "description": "Supply voltage"
    }
  ],
  "version": "DocID031167 Rev 6",
  "url": "https://eu.mouser.com/datasheet/2/389/mp23abs1-1849938.pdf",
  "pages": "3"
},
{
  "_id": {
    "$oid": "67f66d9c9a2431d66f0bee26"
  },
  "name": "MP23DB01HP",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "DOUT",
      "description": "Left/right PDM data output"
    },
    {
      "number": "2",
      "name": "L/R",
      "description": "Left/right channel selection"
    },
    {
      "number": "3 (ground ring)",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "4",
      "name": "CLK",
      "description": "Synchronization input clock"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    }
  ],
  "version": "Rev 2",
  "url": "https://eu.mouser.com/datasheet/2/389/mp23db01hp-1849718.pdf",
  "pages": "3"
},
{
  "_id": {
    "$oid": "67f6708a9a2431d66f0bee28"
  },
  "name": "MP34DT05-A",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "2",
      "name": "LR",
      "description": "Left/Right channel selection"
    },
    {
      "number": "3",
      "name": "CLK",
      "description": "Synchronization input clock"
    },
    {
      "number": "4",
      "name": "DOUT",
      "description": "Left/Right PDM data output"
    },
    {
      "number": "5 (ground ring)",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "Rev 4",
  "url": "https://eu.mouser.com/datasheet/2/389/mp34dt05_a-1850143.pdf",
  "pages": "2"
},
{
  "_id": {
    "$oid": "67f671169a2431d66f0bee29"
  },
  "name": "MP34DT06J",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Mems Microphone",
  "pins": [
    {
      "number": "1",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "2",
      "name": "LR",
      "description": "Left/Right channel selection"
    },
    {
      "number": "3",
      "name": "CLK",
      "description": "Synchronization input clock"
    },
    {
      "number": "4",
      "name": "DOUT",
      "description": "Left/Right channel selection"
    },
    {
      "number": "5 (ground ring)",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "Rev 2",
  "url": "https://eu.mouser.com/datasheet/2/389/mp34dt06j-1387393.pdf",
  "pages": "2"
},
{
  "_id": {
    "$oid": "67f678709a2431d66f0bee2a"
  },
  "name": "IIS3DHHC",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SPC",
      "description": "Clock line for SPI 4-wire interface (SPC)"
    },
    {
      "number": "2",
      "name": "SDI",
      "description": "Serial data input (SDI) line for SPI 4-wire interface"
    },
    {
      "number": "3",
      "name": "SDO",
      "description": "Serial data output (SDO) line for SPI 4-wire interface"
    },
    {
      "number": "4",
      "name": "CS",
      "description": "SPI chip-select line (CS)"
    },
    {
      "number": "5",
      "name": "INT2",
      "description": "Programmable interrupt 2 generated according to a configurable FIFO threshold in a dedicated register"
    },
    {
      "number": "6",
      "name": "INT1",
      "description": "Programmable interrupt 1 generated according to a configurable FIFO threshold in a dedicated register"
    },
    {
      "number": "7",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins\nRecommended power supply decoupling capacitor (100 nF)"
    },
    {
      "number": "8",
      "name": "Vdd",
      "description": "Power supply\nRecommended power supply decoupling capacitors (100 nF ceramic in parallel with 10 µF aluminum)"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V power supply"
    },
    {
      "number": "10",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "11",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "12",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "13",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "14",
      "name": "Reserved",
      "description": "Connect to GND or leave unconnected"
    },
    {
      "number": "15",
      "name": "Reserved",
      "description": "Connect to GND or leave unconnected"
    },
    {
      "number": "16",
      "name": "Reserved",
      "description": "Connect to GND or leave unconnected"
    }
  ],
  "version": "Rev 3",
  "url": "https://eu.mouser.com/datasheet/2/389/iis3dhhc-1849244.pdf",
  "pages": "2"
},
{
  "_id": {
    "$oid": "67f67a009a2431d66f0bee2c"
  },
  "name": "MIS2DH",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCL SPC",
      "description": "I2C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable I2C/SPI mode selection: 1: SPI idle mode / I2C communication enabled 0: SPI communication mode / I2C disabled"
    },
    {
      "number": "3",
      "name": "SDO SA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA SDI SDO",
      "description": "I2C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "Res",
      "description": "Connect to GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2"
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1"
    }
  ],
  "version": "Rev 2",
  "url": "https://eu.mouser.com/datasheet/2/389/mis2dh-1849717.pdf",
  "pages": "9"
},
{
  "_id": {
    "$oid": "67f67bb99a2431d66f0bee2d"
  },
  "name": "IIS2DULPX",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCL SPC",
      "description": "I2C/MIPI I3C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI/I2C/MIPI I3C mode selection (1: SPI idle mode / I2C/MIPI I3C enabled; 0: SPI enabled / I2C/MIPI I3C disabled)"
    },
    {
      "number": "3",
      "name": "SDO TA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (TA0)"
    },
    {
      "number": "4",
      "name": "SDA SDI SDO",
      "description": "I2C/MIPI I3C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to VDD, VDDIO, or GND."
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "RES/EXT_CLK",
      "description": "Connect to GND if not used as interrupt pin 1 or as\nExternal clock for the synchronization of multiple sensors"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDDIO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2. Clock input when selected in one-shot mode. AH input 2 (or Qvar electrode 2) is connected if the analog hub (or Qvar functionality) is enabled."
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1. AH input 1 (or Qvar electrode 1) is connected if the analog hub (or Qvar functionality) is enabled."
    }
  ],
  "version": "Rev 1",
  "url": "https://www.st.com/resource/en/datasheet/iis2dulpx.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "67f67d6b9a2431d66f0bee2e"
  },
  "name": "LIS25BA",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "I2C_SCL",
      "description": "I2C serial clock - SCL"
    },
    {
      "number": "2",
      "name": "I2C_SDA",
      "description": "I2C serial data - SDA"
    },
    {
      "number": "3",
      "name": "TDM_BCLK",
      "description": "TDM bit clock"
    },
    {
      "number": "4",
      "name": "TDM_WCLK",
      "description": "TDM word clock"
    },
    {
      "number": "5",
      "name": "TDM_SDOUT",
      "description": "TDM serial data output"
    },
    {
      "number": "6",
      "name": "RES (GND)",
      "description": "Reserved pin (connect to GND)"
    },
    {
      "number": "7",
      "name": "TDM_MCLK",
      "description": "TDM master clock"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "RES (VDD)",
      "description": "Reserved pin (connect to VDD)"
    },
    {
      "number": "11",
      "name": "I2C_A0",
      "description": "I2C slave address selection"
    },
    {
      "number": "12",
      "name": "RES (GND)",
      "description": "Reserved pin (connect to GND)"
    },
    {
      "number": "13",
      "name": "RES (GND)",
      "description": "Reserved pin (connect to GND)"
    },
    {
      "number": "14",
      "name": "RES (GND)",
      "description": "Reserved pin (connect to GND)"
    }
  ],
  "version": "Rev 4",
  "url": "https://eu.mouser.com/datasheet/2/389/lis25ba-1849588.pdf",
  "pages": "6"
},
{
  "_id": {
    "$oid": "67f680ce9a2431d66f0bee2f"
  },
  "name": "AIS2IH",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCL SPC",
      "description": "I2C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "SDO SA0",
      "description": "SPI serial data output (SDO)\nI²C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA SDI SDO",
      "description": "I2C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to VDD, Vdd_IO, or GND."
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2. Clock input when selected in single data conversion on demand."
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1"
    }
  ],
  "version": "Rev 4",
  "url": "https://eu.mouser.com/datasheet/2/389/ais2ih-2006758.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "67f681e19a2431d66f0bee30"
  },
  "name": "H3LIS100DL",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "3",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "4",
      "name": "SCL SPC",
      "description": "I2C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "6",
      "name": "GND 6 SDA SDI SDO",
      "description": "I2C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "7",
      "name": "SDO SA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)"
    },
    {
      "number": "8",
      "name": "CS",
      "description": "SPI enable I2C/SPI mode selection (1: I2C mode; 0: SPI enabled)"
    },
    {
      "number": "9",
      "name": "INT 2",
      "description": "Inertial interrupt 2"
    },
    {
      "number": "10",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "11",
      "name": "INT 1",
      "description": "Inertial interrupt 1"
    },
    {
      "number": "12",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "13",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "14",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "15",
      "name": "Reserved",
      "description": "Connect to Vdd"
    },
    {
      "number": "16",
      "name": "GND",
      "description": "0 V supply"
    }
  ],
  "version": "Rev 2",
  "url": "https://eu.mouser.com/datasheet/2/389/h3lis100dl-1849125.pdf",
  "pages": "8"
},
{
  "_id": {
    "$oid": "67f684079a2431d66f0bee31"
  },
  "name": "H3LIS200DL",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "3",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "4",
      "name": "SCL SPC",
      "description": "I2C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "6",
      "name": "SDA SDI SDO",
      "description": "I2C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "7",
      "name": "SDO SA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)"
    },
    {
      "number": "8",
      "name": "CS",
      "description": "SPI enable I2C/SPI mode selection (1: I2C mode; 0: SPI enabled)"
    },
    {
      "number": "9",
      "name": "INT 2",
      "description": "Inertial interrupt 2"
    },
    {
      "number": "10",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "11",
      "name": "INT 1",
      "description": "Inertial interrupt 1"
    },
    {
      "number": "12",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "13",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "14",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "15",
      "name": "Reserved",
      "description": "Connect to Vdd"
    },
    {
      "number": "16",
      "name": "GND",
      "description": "0 V supply"
    }
  ],
  "version": "Rev 2",
  "url": "https://eu.mouser.com/datasheet/2/389/h3lis200dl-1849365.pdf",
  "pages": "8"
},
{
  "_id": {
    "$oid": "67f7d0aa9a2431d66f0bee32"
  },
  "name": "H3LIS331DL",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "3",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "4",
      "name": "SCL SPC",
      "description": "I2C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "6",
      "name": "SDA SDI SDO",
      "description": "I2C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "7",
      "name": "SDO SA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)"
    },
    {
      "number": "8",
      "name": "CS",
      "description": "SPI enable\nI2C/SPI mode selection (1: I2C mode; 0: SPI enabled)"
    },
    {
      "number": "9",
      "name": "INT 2",
      "description": "Inertial interrupt 2"
    },
    {
      "number": "10",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "11",
      "name": "INT 1",
      "description": "Inertial interrupt 1"
    },
    {
      "number": "12",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "13",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "14",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "15",
      "name": "Reserved",
      "description": "Connect to Vdd"
    },
    {
      "number": "16",
      "name": "GND",
      "description": "0 V supply"
    }
  ],
  "version": "Rev 4",
  "url": "https://eu.mouser.com/datasheet/2/389/h3lis331dl-1849035.pdf",
  "pages": "3"
},
{
  "_id": {
    "$oid": "67f7d1489a2431d66f0bee33"
  },
  "name": "IIS2DH",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCL SPC",
      "description": "I2C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable\nI2C/SPI mode selection:\n1: SPI idle mode / I2C communication enabled\n0: SPI communication mode / I2C disabled"
    },
    {
      "number": "3",
      "name": "SDO SA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA SDI SDO",
      "description": "I2C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "Res",
      "description": "Connect to GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2"
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1"
    }
  ],
  "version": "Rev 2",
  "url": "https://eu.mouser.com/datasheet/2/389/iis2dh-1849434.pdf",
  "pages": "9"
},
{
  "_id": {
    "$oid": "67f7d2689a2431d66f0bee34"
  },
  "name": "IIS2DLPC",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCL SPC",
      "description": "I2C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable\nI2C/SPI mode selection\n(1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "SDO SA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA SDI SDO",
      "description": "I2C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to VDD, VDDIO, or GND."
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2. Clock input when selected in single data conversion on demand."
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1"
    }
  ],
  "version": "Rev 4",
  "url": "https://eu.mouser.com/datasheet/2/389/iis2dlpc-1483239.pdf",
  "pages": "9"
},
{
  "_id": {
    "$oid": "67f7d3819a2431d66f0bee35"
  },
  "name": "IIS328DQ",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "3",
      "name": "INT_2",
      "description": "Inertial interrupt 2"
    },
    {
      "number": "4",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "INT_1",
      "description": "Inertial interrupt 1"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "11",
      "name": "SPC SCL",
      "description": "SPI serial port clock (SPC)\nI2C serial clock (SCL)\nInternal active pull-up"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "SPI enable\nI2C/SPI mode selection (0: SPI enabled; 1: I2C mode)\nInternal active pull-up"
    },
    {
      "number": "13",
      "name": "Reserved",
      "description": "Connect to Vdd"
    },
    {
      "number": "14",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "15",
      "name": "SDO SA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)\nInternal active pull-up"
    },
    {
      "number": "16",
      "name": "SDI SDO SDA",
      "description": "SPI serial data input (SDI)\n3-wire interface serial data output (SDO)\nI2C serial data (SDA)\nInternal active pull-up"
    },
    {
      "number": "17",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "18",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "19",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "20",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "21",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "22",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "23",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "24",
      "name": "NC",
      "description": "Not internally connected"
    }
  ],
  "version": "Rev 3",
  "url": "https://eu.mouser.com/datasheet/2/389/iis328dq-1849367.pdf",
  "pages": "8"
},
{
  "_id": {
    "$oid": "67f7d49c9a2431d66f0bee36"
  },
  "name": "IIS3DWB",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SDO SA0",
      "description": "SPI 4-wire interface serial data output (SDO)\nI2C least significant bit of the device address (SA0)"
    },
    {
      "number": "2",
      "name": "RES",
      "description": "Connect to VDD_IO or GND"
    },
    {
      "number": "3",
      "name": "RES",
      "description": "Connect to VDD_IO or GND"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt #1"
    },
    {
      "number": "5",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Programmable interrupt #2"
    },
    {
      "number": "10",
      "name": "RES",
      "description": "Connect to VDD_IO or leave unconnected"
    },
    {
      "number": "11",
      "name": "RES",
      "description": "Connect to VDD_IO or leave unconnected"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/SPI mode selection\n(1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "13",
      "name": "SPC SCL",
      "description": "SPI serial port clock (SPC)\nI2C serial clock (SCL)"
    },
    {
      "number": "14",
      "name": "SDI SDO SDA",
      "description": "SPI serial data input (SDI)\n3-wire interface serial data output (SDO)\nI2C serial data (SDA)"
    }
  ],
  "version": "Rev 6",
  "url": "https://eu.mouser.com/datasheet/2/389/iis3dwb-1761424.pdf",
  "pages": "3"
},
{
  "_id": {
    "$oid": "67f7d64d9a2431d66f0bee37"
  },
  "name": "LIS2DH12",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCL SPC",
      "description": "I2C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable\nI2C/SPI mode selection:\n1: SPI idle mode / I2C communication enabled\n0: SPI communication mode / I2C disabled"
    },
    {
      "number": "3",
      "name": "SDO SA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA SDI SDO",
      "description": "I2C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "Res",
      "description": "Connect to GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2"
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1"
    }
  ],
  "version": "Rev 6",
  "url": "https://eu.mouser.com/datasheet/2/389/lis2dh12-1849850.pdf",
  "pages": "9"
},
{
  "_id": {
    "$oid": "67f7d6fe9a2431d66f0bee38"
  },
  "name": "LIS2DW12",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCL SPC",
      "description": "I2C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable\nI2C/SPI mode selection\n(1: SPI idle mode / I2C communication enabled;\n0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "SDO SA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA SDI SDO",
      "description": "I2C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to VDD, VDDIO, or GND."
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2. Clock input when selected in single data conversion on demand."
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1"
    }
  ],
  "version": "Rev 8",
  "url": "https://eu.mouser.com/datasheet/2/389/lis2dw12-1849760.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "67f7d7a79a2431d66f0bee39"
  },
  "name": "LIS2HH12",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCL SPC",
      "description": "I2C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable\nI2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "SDO SA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA SDI SDO",
      "description": "I2C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2"
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1"
    }
  ],
  "version": "Rev 5",
  "url": "https://eu.mouser.com/datasheet/2/389/lis2hh12-1849522.pdf",
  "pages": "9"
},
{
  "_id": {
    "$oid": "67f7d8869a2431d66f0bee3a"
  },
  "name": "LIS331DLH",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "3",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "4",
      "name": "SCL SPC",
      "description": "I2C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "0V supply"
    },
    {
      "number": "6",
      "name": "SDA SDI SDO",
      "description": "I2C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "7",
      "name": "SDO SA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)"
    },
    {
      "number": "8",
      "name": "CS",
      "description": "SPI enable\nI2C/SPI mode selection (1: I2C mode; 0: SPI enabled)"
    },
    {
      "number": "9",
      "name": "INT 2",
      "description": "Inertial interrupt 2"
    },
    {
      "number": "10",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "11",
      "name": "INT 1",
      "description": "Inertial interrupt 1"
    },
    {
      "number": "12",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "13",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "14",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "15",
      "name": "Reserved",
      "description": "Connect to Vdd"
    },
    {
      "number": "16",
      "name": "GND",
      "description": "0 V supply"
    }
  ],
  "version": "Rev 3",
  "url": "https://eu.mouser.com/datasheet/2/389/lis331dlh-1849735.pdf",
  "pages": "8"
},
{
  "_id": {
    "$oid": "67f7da579a2431d66f0bee3b"
  },
  "name": "AIS25BA",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "I2C_SCL",
      "description": "I2C serial clock - SCL"
    },
    {
      "number": "2",
      "name": "I2C_SDA",
      "description": "I2C serial data - SDA"
    },
    {
      "number": "2",
      "name": "TDM_BCLK",
      "description": "TDM bit clock"
    },
    {
      "number": "3",
      "name": "TDM_WCLK",
      "description": "TDM bit clock"
    },
    {
      "number": "4",
      "name": "TDM_WCLK",
      "description": "TDM word clock"
    },
    {
      "number": "5",
      "name": "TDM_SDOUT",
      "description": "TDM serial data output"
    },
    {
      "number": "6",
      "name": "RES (GND)",
      "description": "Reserved pin (connect to GND)"
    },
    {
      "number": "7",
      "name": "TDM_MCLK",
      "description": "TDM master clock"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "RES (VDD)",
      "description": "Reserved pin (connect to VDD)"
    },
    {
      "number": "11",
      "name": "I2C_A0",
      "description": "I2C slave address selection"
    },
    {
      "number": "12",
      "name": "RES (GND)",
      "description": "Reserved pin (connect to GND)"
    },
    {
      "number": "13",
      "name": "RES (GND)",
      "description": "Reserved pin (connect to GND)"
    },
    {
      "number": "14",
      "name": "RES (GND)",
      "description": "Reserved pin (connect to GND)"
    }
  ],
  "version": "Rev 1",
  "url": "https://eu.mouser.com/datasheet/2/389/ais25ba-3002193.pdf",
  "pages": "2"
},
{
  "_id": {
    "$oid": "67f7dc159a2431d66f0bee3c"
  },
  "name": "LIS2DUXS12",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCL SPC",
      "description": "I2C/MIPI I3C® serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI/I2C/MIPI I3C® mode selection\n(1: SPI idle mode / I2C/MIPI I3C® enabled; 0: SPI enabled / I2C/MIPI I3C® disabled)"
    },
    {
      "number": "3",
      "name": "SDO SA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA SDI SDO",
      "description": "I2C/MIPI I3C® serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to Vdd, Vdd_IO, or GND."
    },
    {
      "number": "5",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "RES",
      "description": "Connect to GND if not used as interrupt pin 1"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2. Clock input when selected in one-shot mode. AH input 2 (or Qvar electrode 2) is connected if the analog hub (or Qvar functionality) is enabled."
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1. AH input 1 (or Qvar electrode 1) is connected if the analog hub (or Qvar functionality) is enabled."
    }
  ],
  "version": "Rev 2",
  "url": "https://eu.mouser.com/datasheet/2/389/lis2duxs12-3074255.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "67f7dd139a2431d66f0bee3d"
  },
  "name": "ISM303DAC",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCL SPC",
      "description": "I2C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "I2C/SPI mode selection\n(1: SPI idle mode / I2C communication enabled;\n0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "Reserved",
      "description": "Reserved, connected to GND"
    },
    {
      "number": "4",
      "name": "SDA SDI SDO",
      "description": "I2C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "C1",
      "description": "Capacitor connection (C1 = 220 nF)"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V"
    },
    {
      "number": "7",
      "name": "INT_MAG/DRDY",
      "description": "Magnetometer interrupt/data-ready signal"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V"
    },
    {
      "number": "9",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2_XL",
      "description": "Accelerometer interrupt 2"
    },
    {
      "number": "12",
      "name": "INT1_XL",
      "description": "Accelerometer interrupt 1"
    }
  ],
  "version": "Rev 2",
  "url": "https://eu.mouser.com/datasheet/2/389/ism303dac-1849284.pdf",
  "pages": "12"
},
{
  "_id": {
    "$oid": "67f7dee39a2431d66f0bee3e"
  },
  "name": "LIS2DE12",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCL SPC",
      "description": "I2C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable\nI2C/SPI mode selection:\n1: SPI idle mode / I2C communication enabled\n0: SPI communication mode / I2C disabled"
    },
    {
      "number": "3",
      "name": "SDO SA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA SDI SDO",
      "description": "I2C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "Res",
      "description": "Connect to GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2"
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1"
    }
  ],
  "version": "Rev 2",
  "url": "https://eu.mouser.com/datasheet/2/389/lis2de12-1849734.pdf",
  "pages": "9"
},
{
  "_id": {
    "$oid": "67f7df839a2431d66f0bee3f"
  },
  "name": "LIS2DS12",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCL SPC",
      "description": "I2C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable\nI2C/SPI mode selection\n(1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "SDO SA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA SDI SDO",
      "description": "I2C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to Vdd, Vdd_IO or GND."
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2"
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1"
    }
  ],
  "version": "Rev 7",
  "url": "https://eu.mouser.com/datasheet/2/389/lis2ds12-1849521.pdf",
  "pages": "11"
},
{
  "_id": {
    "$oid": "67f7e0b09a2431d66f0bee40"
  },
  "name": "LIS2DTW12",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCL SPC",
      "description": "I2C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable\nI²C/SPI mode selection\n(1: SPI idle mode / I²C communication enabled; 0: SPI communication mode / I²C disabled)"
    },
    {
      "number": "3",
      "name": "SDO SA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA SDI SDO",
      "description": "I2C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to VDD, VDDIO, or GND."
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2. Clock input when selected in single data conversion on demand."
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1"
    }
  ],
  "version": "Rev 3",
  "url": "https://eu.mouser.com/datasheet/2/389/lis2dtw12-1545785.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "67f7e1589a2431d66f0bee41"
  },
  "name": "LIS2DU12",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCL SPC",
      "description": "I2C/MIPI I3C® serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI/I2C/MIPI I3C® mode selection\n(1: SPI idle mode / I2C/MIPI I3C® enabled;\n0: SPI enabled / I2C/MIPI I3C® disabled)"
    },
    {
      "number": "3",
      "name": "SDO SA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA SDI SDO",
      "description": "I2C/MIPI I3C® serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to Vdd, Vdd_IO, or GND."
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2. Clock input when selected in single data conversion on demand."
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1"
    }
  ],
  "version": "Rev 4",
  "url": "https://eu.mouser.com/datasheet/2/389/lis2du12-3078714.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "67f7e2569a2431d66f0bee42"
  },
  "name": "LIS3DHH",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SPC",
      "description": "Clock line for SPI 4-wire interface (SPC)"
    },
    {
      "number": "2",
      "name": "SDI",
      "description": "Serial data input (SDI) line for SPI 4-wire interface"
    },
    {
      "number": "3",
      "name": "SDO",
      "description": "Serial data output (SDO) line for SPI 4-wire interface"
    },
    {
      "number": "4",
      "name": "CS",
      "description": "SPI chip-select line (CS)"
    },
    {
      "number": "5",
      "name": "INT2",
      "description": "Programmable interrupt 2 generated according to a configurable FIFO threshold in a dedicated register"
    },
    {
      "number": "6",
      "name": "INT1",
      "description": "Programmable interrupt 1 generated according to a configurable FIFO threshold in a dedicated register"
    },
    {
      "number": "7",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins\nRecommended power supply decoupling capacitor (100 nF)"
    },
    {
      "number": "8",
      "name": "Vdd",
      "description": "Power supply\nRecommended power supply decoupling capacitors (100 nF ceramic in parallel with 10 μF aluminum)"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V power supply"
    },
    {
      "number": "10",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "11",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "12",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "13",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "14",
      "name": "Reserved",
      "description": "Connect to GND or leave unconnected"
    },
    {
      "number": "15",
      "name": "Reserved",
      "description": "Connect to GND or leave unconnected"
    },
    {
      "number": "16",
      "name": "Reserved",
      "description": "Connect to GND or leave unconnected"
    }
  ],
  "version": "Rev 3",
  "url": "https://eu.mouser.com/datasheet/2/389/lis3dhh-1849590.pdf",
  "pages": "6"
},
{
  "_id": {
    "$oid": "67f7e5719a2431d66f0bee43"
  },
  "name": "LIS3DH",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "3",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "4",
      "name": "SCL\nSPC",
      "description": "I2C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "6",
      "name": "SDA\nSDI\nSDO",
      "description": "I2C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "7",
      "name": "SDO\nSA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)"
    },
    {
      "number": "8",
      "name": "CS",
      "description": "SPI enable\nI2C/SPI mode selection:\n1: SPI idle mode / I2C communication enabled\n0: SPI communication mode / I2C disabled"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Inertial interrupt 2"
    },
    {
      "number": "10",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "11",
      "name": "INT1",
      "description": "Inertial interrupt 1"
    },
    {
      "number": "12",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "13",
      "name": "ADC3",
      "description": "Analog-to-digital converter input 3"
    },
    {
      "number": "14",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "15",
      "name": "ADC2",
      "description": "Analog-to-digital converter input 2"
    },
    {
      "number": "16",
      "name": "ADC1",
      "description": "Analog-to-digital converter input 1"
    }
  ],
  "version": "Rev 2",
  "url": "https://eu.mouser.com/datasheet/2/389/lis3dh-1849589.pdf",
  "pages": "9"
},
{
  "_id": {
    "$oid": "67f7e8d49a2431d66f0bee44"
  },
  "name": "AIS3624DQ",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "3",
      "name": "INT_2",
      "description": "Inertial interrupt 2"
    },
    {
      "number": "4",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "INT_1",
      "description": "Inertial interrupt 1"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "11",
      "name": "SPC\nSCL",
      "description": "SPI serial port clock (SPC)\nI2C serial clock (SCL)"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "SPI enable\nI2C/SPI mode selection (0: SPI enabled; 1: I2C mode)"
    },
    {
      "number": "13",
      "name": "Reserved",
      "description": "Connect to Vdd"
    },
    {
      "number": "14",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "15",
      "name": "SDO\nSA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)"
    },
    {
      "number": "16",
      "name": "SDI\nSDO\nSDA",
      "description": "SPI serial data input (SDI)\n3-wire interface serial data output (SDO)\nI2C serial data (SDA)"
    },
    {
      "number": "17",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "18",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "19",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "20",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "21",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "22",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "23",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "24",
      "name": "NC",
      "description": "Not internally connected"
    }
  ],
  "version": "Rev 2",
  "url": "https://eu.mouser.com/datasheet/2/389/ais3624dq-1848975.pdf",
  "pages": "9"
},
{
  "_id": {
    "$oid": "67fa6bee9a2431d66f0bee45"
  },
  "name": "LIS2DUX12",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCL\nSPC",
      "description": "I2C/MIPI I3C® serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI/I2C/MIPI I3C® mode selection\n(1: SPI idle mode / I2C/MIPI I3C® enabled;\n0: SPI enabled / I2C/MIPI I3C® disabled)"
    },
    {
      "number": "3",
      "name": "SDO\nSA0",
      "description": "SPI serial data output (SDO)\nI2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA\nSDI\nSDO",
      "description": "I2C/MIPI I3C® serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to Vdd, Vdd_IO, or GND."
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "RES/EXT_CLK",
      "description": "Connect to GND if not used as interrupt pin 1\nExternal clock for synchronization of multiple sensors"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2. Clock input when selected in one-shot mode"
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1"
    }
  ],
  "version": "Rev 7",
  "url": "https://www.st.com/resource/en/datasheet/lis2dux12.pdf",
  "pages": "5"
},
{
  "_id": {
    "$oid": "67fa737c9a2431d66f0bee4a"
  },
  "name": "ADXL326",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "NC",
      "description": "No Connect (or Optionally Ground)"
    },
    {
      "number": "2",
      "name": "ST",
      "description": "Self Test"
    },
    {
      "number": "3",
      "name": "COM",
      "description": "Common"
    },
    {
      "number": "4",
      "name": "NC",
      "description": "No Connect"
    },
    {
      "number": "5",
      "name": "COM",
      "description": "Common"
    },
    {
      "number": "6",
      "name": "COM",
      "description": "Common"
    },
    {
      "number": "7",
      "name": "COM",
      "description": "Common"
    },
    {
      "number": "8",
      "name": "ZOUT",
      "description": "Z Channel Output"
    },
    {
      "number": "9",
      "name": "NC",
      "description": "No Connect (or Optionally Ground)"
    },
    {
      "number": "10",
      "name": "YOUT",
      "description": "Y Channel Output"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "No Connect"
    },
    {
      "number": "12",
      "name": "XOUT",
      "description": "X Channel Output"
    },
    {
      "number": "13",
      "name": "NC",
      "description": "No Connect"
    },
    {
      "number": "14",
      "name": "VS",
      "description": "Supply Voltage (1.8 V to 3.6 V)"
    },
    {
      "number": "15",
      "name": "VS",
      "description": "Supply Voltage (1.8 V to 3.6 V)"
    },
    {
      "number": "16",
      "name": "NC",
      "description": "No Connect"
    },
    {
      "number": "EP",
      "name": "Exposed pad",
      "description": "Not internally connected. Solder for mechanical integrity."
    }
  ],
  "version": "Rev. 0",
  "url": "https://eu.mouser.com/datasheet/2/609/ADXL326-1503661.pdf",
  "pages": "5"
},
{
  "_id": {
    "$oid": "67fa77d89a2431d66f0bee4b"
  },
  "name": "ADXL316",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "DNC",
      "description": "Do Not Connect."
    },
    {
      "number": "2",
      "name": "ST",
      "description": "Self Test."
    },
    {
      "number": "3",
      "name": "COM",
      "description": "Ground."
    },
    {
      "number": "4",
      "name": "DNC",
      "description": "Do Not Connect."
    },
    {
      "number": "5",
      "name": "DNC",
      "description": "Do Not Connect."
    },
    {
      "number": "6",
      "name": "ZOUT",
      "description": "Z Channel Output."
    },
    {
      "number": "7",
      "name": "DNC",
      "description": "Do Not Connect."
    },
    {
      "number": "8",
      "name": "YOUT",
      "description": "Y Channel Output."
    },
    {
      "number": "9",
      "name": "XOUT",
      "description": "X Channel Output."
    },
    {
      "number": "10",
      "name": "DNC",
      "description": "Do Not Connect."
    },
    {
      "number": "11",
      "name": "DNC",
      "description": "Do Not Connect."
    },
    {
      "number": "12",
      "name": "VS",
      "description": "Supply Voltage (1.8 V to 3.6 V)."
    }
  ],
  "version": "Rev. C",
  "url": "https://eu.mouser.com/datasheet/2/609/ADXL316-1503874.pdf",
  "pages": "5"
},
{
  "_id": {
    "$oid": "67fa7aab9a2431d66f0bee4c"
  },
  "name": "ADXL1005",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "2",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "3",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "4",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "5",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "6",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "7",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "8",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "9",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "10",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "11",
      "name": "DNF",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "12",
      "name": "VDD",
      "description": "3.0 V to 5.25 V Supply Voltage."
    },
    {
      "number": "13",
      "name": "VSS",
      "description": "Supply Ground."
    },
    {
      "number": "14",
      "name": "VSS",
      "description": "Supply Ground."
    },
    {
      "number": "15",
      "name": "STANDBY",
      "description": "Standby Mode Input, Active High."
    },
    {
      "number": "16",
      "name": "ST",
      "description": "Self Test Input, Active High."
    },
    {
      "number": "17",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "18",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "19",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "20",
      "name": "OR",
      "description": "Overrange Output. This pin instantaneously indicates when the overrange detection circuit\nidentifies significant overrange activity. This pin is not latched."
    },
    {
      "number": "21",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "22",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "23",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "24",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "25",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "26",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "27",
      "name": "VSS",
      "description": "Supply Ground."
    },
    {
      "number": "28",
      "name": "VSS",
      "description": "Supply Ground."
    },
    {
      "number": "29",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "30",
      "name": "XOUT",
      "description": "Analog Output Voltage."
    }
  ],
  "version": "Rev. 0",
  "url": "https://eu.mouser.com/datasheet/2/609/adxl1005-1578502.pdf",
  "pages": "5"
},
{
  "_id": {
    "$oid": "67fa7b5b9a2431d66f0bee4d"
  },
  "name": "ADXL327",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "NC",
      "description": "No Connect (or Optionally Ground)"
    },
    {
      "number": "2",
      "name": "ST",
      "description": "Self Test"
    },
    {
      "number": "3",
      "name": "COM",
      "description": "Common"
    },
    {
      "number": "4",
      "name": "NC",
      "description": "No Connect"
    },
    {
      "number": "5",
      "name": "COM",
      "description": "Common"
    },
    {
      "number": "6",
      "name": "COM",
      "description": "Common"
    },
    {
      "number": "7",
      "name": "COM",
      "description": "Common"
    },
    {
      "number": "8",
      "name": "ZOUT",
      "description": "Z Channel Output"
    },
    {
      "number": "9",
      "name": "NC",
      "description": "No Connect (or Optionally Ground)"
    },
    {
      "number": "10",
      "name": "YOUT",
      "description": "Y Channel Output"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "No Connect"
    },
    {
      "number": "12",
      "name": "XOUT",
      "description": "X Channel Output"
    },
    {
      "number": "13",
      "name": "NC",
      "description": "No Connect"
    },
    {
      "number": "14",
      "name": "VS",
      "description": "Supply Voltage (1.8 V to 3.6 V)"
    },
    {
      "number": "15",
      "name": "VS",
      "description": "Supply Voltage (1.8 V to 3.6 V)"
    },
    {
      "number": "16",
      "name": "NC",
      "description": "No Connect"
    },
    {
      "number": "EP",
      "name": "Exposed pad",
      "description": "Not internally connected. Solder for mechanical integrity."
    }
  ],
  "version": "Rev. 0",
  "url": "https://eu.mouser.com/datasheet/2/609/ADXL327-1503740.pdf",
  "pages": "5"
},
{
  "_id": {
    "$oid": "67fa7c129a2431d66f0bee4e"
  },
  "name": "ADXL362",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "VDD I/O",
      "description": "Supply Voltage for Digital I/O."
    },
    {
      "number": "2",
      "name": "NC",
      "description": "No Connect. Not internally connected."
    },
    {
      "number": "3",
      "name": "Reserved",
      "description": "Reserved. Can be left unconnected or connected to GND."
    },
    {
      "number": "4",
      "name": "SCLK",
      "description": "SPI Communications Clock."
    },
    {
      "number": "5",
      "name": "Reserved",
      "description": "Reserved. Can be left unconnected or connected to GND."
    },
    {
      "number": "6",
      "name": "MOSI",
      "description": "Master Output, Slave Input. SPI serial data input."
    },
    {
      "number": "7",
      "name": "MISO",
      "description": "Master Input, Slave Output. SPI serial data output."
    },
    {
      "number": "8",
      "name": "CS",
      "description": "SPI Chip Select, Active Low. Must be low during SPI communications."
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Interrupt 2 Output. INT2 also serves as an input for synchronized sampling."
    },
    {
      "number": "10",
      "name": "Reserved",
      "description": "Reserved. Can be left unconnected, or connected to GND."
    },
    {
      "number": "11",
      "name": "INT1",
      "description": "Interrupt 1 Output. INT1 also serves as an input for external clocking."
    },
    {
      "number": "12",
      "name": "GND",
      "description": "Ground. This pin must be grounded."
    },
    {
      "number": "13",
      "name": "GND",
      "description": "Ground. This pin must be grounded."
    },
    {
      "number": "14",
      "name": "VS",
      "description": "Supply Voltage."
    },
    {
      "number": "15",
      "name": "NC",
      "description": "No Connect. Not internally connected."
    },
    {
      "number": "16",
      "name": "GND",
      "description": "Ground. This pin must be grounded."
    }
  ],
  "version": "Rev. G",
  "url": "https://eu.mouser.com/datasheet/2/609/adxl362-3122260.pdf",
  "pages": "7"
},
{
  "_id": {
    "$oid": "67fa7cea9a2431d66f0bee4f"
  },
  "name": "ADXL325",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "NC",
      "description": "No Connect (or Optionally Ground)"
    },
    {
      "number": "2",
      "name": "ST",
      "description": "Self Test"
    },
    {
      "number": "3",
      "name": "COM",
      "description": "Common"
    },
    {
      "number": "4",
      "name": "NC",
      "description": "No Connect"
    },
    {
      "number": "5",
      "name": "COM",
      "description": "Common"
    },
    {
      "number": "6",
      "name": "COM",
      "description": "Common"
    },
    {
      "number": "7",
      "name": "COM",
      "description": "Common"
    },
    {
      "number": "8",
      "name": "ZOUT",
      "description": "Z Channel Output"
    },
    {
      "number": "9",
      "name": "NC",
      "description": "No Connect (or Optionally Ground)"
    },
    {
      "number": "10",
      "name": "YOUT",
      "description": "Y Channel Output"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "No Connect"
    },
    {
      "number": "12",
      "name": "XOUT",
      "description": "X Channel Output"
    },
    {
      "number": "13",
      "name": "NC",
      "description": "No Connect"
    },
    {
      "number": "14",
      "name": "VS",
      "description": "Supply Voltage (1.8 V to 3.6 V)"
    },
    {
      "number": "15",
      "name": "VS",
      "description": "Supply Voltage (1.8 V to 3.6 V)"
    },
    {
      "number": "16",
      "name": "NC",
      "description": "No Connect"
    },
    {
      "number": "EP",
      "name": "Exposed pad",
      "description": "Not internally connected. Solder for mechanical integrity."
    }
  ],
  "version": "Rev. 0",
  "url": "https://eu.mouser.com/datasheet/2/609/ADXL325-1503825.pdf",
  "pages": "5"
},
{
  "_id": {
    "$oid": "67fa7e5b9a2431d66f0bee50"
  },
  "name": "ADXL346",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "VDD I/O",
      "description": "Digital Interface Supply Voltage."
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not Internally Connected."
    },
    {
      "number": "3",
      "name": "NC",
      "description": "Not Internally Connected."
    },
    {
      "number": "4",
      "name": "SCL/SCLK",
      "description": "Serial Communications Clock."
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Not Internally Connected."
    },
    {
      "number": "6",
      "name": "SDA\nSDI\nSDIO ",
      "description": "Serial Data (I2C)\nSerial Data Input (SPI 4-Wire)\nSerial Data Input and Output (SPI 3-Wire)."
    },
    {
      "number": "7",
      "name": "SDO\nALT ADDRESS ",
      "description": "Serial Data Output (SPI 4-Wire)\nAlternate I2C Address Select (I2C)."
    },
    {
      "number": "8",
      "name": "CS",
      "description": "Chip Select."
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Interrupt 2 Output."
    },
    {
      "number": "10",
      "name": "NC",
      "description": "Not Internally Connected."
    },
    {
      "number": "11",
      "name": "INT1",
      "description": "Interrupt 1 Output."
    },
    {
      "number": "12",
      "name": "GND",
      "description": "Must be connected to ground."
    },
    {
      "number": "13",
      "name": "GND",
      "description": "Must be connected to ground."
    },
    {
      "number": "14",
      "name": "VS",
      "description": "Supply Voltage."
    },
    {
      "number": "15",
      "name": "RESERVED",
      "description": "Reserved. This pin must be connected to VS."
    },
    {
      "number": "16",
      "name": "GND",
      "description": "Must be connected to ground."
    }
  ],
  "version": "Rev C.",
  "url": "https://eu.mouser.com/datasheet/2/609/ADXL346-1503741.pdf",
  "pages": "6"
},
{
  "_id": {
    "$oid": "67fa7fc29a2431d66f0bee53"
  },
  "name": "ADXL212",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "ST",
      "description": "Self Test."
    },
    {
      "number": "2",
      "name": "T2",
      "description": "Frequency Set. Connect the RSET resistor to ground. t2 = RSET/125 MΩ"
    },
    {
      "number": "3",
      "name": "COM",
      "description": "Common."
    },
    {
      "number": "4",
      "name": "YOUT",
      "description": "Y Channel Output."
    },
    {
      "number": "5",
      "name": "XOUT",
      "description": "X Channel Output."
    },
    {
      "number": "6",
      "name": "YFILT",
      "description": "Y Channel Filter Pin"
    },
    {
      "number": "7",
      "name": "XFILT",
      "description": "X Channel Filter Pin."
    },
    {
      "number": "8",
      "name": "VS",
      "description": "Voltage Supply. 3 V to 5.25 V."
    }
  ],
  "version": "Rev. 0",
  "url": "https://eu.mouser.com/datasheet/2/609/ADXL212-1503780.pdf",
  "pages": "5"
},
{
  "_id": {
    "$oid": "67fa825f9a2431d66f0bee54"
  },
  "name": "ADXL313",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "This pin must be connected to ground."
    },
    {
      "number": "2",
      "name": "RESERVED",
      "description": "Reserved. This pin must be connected to VS or left open."
    },
    {
      "number": "3",
      "name": "GND",
      "description": "This pin must be connected to ground."
    },
    {
      "number": "4",
      "name": "GND",
      "description": "This pin must be connected to ground."
    },
    {
      "number": "5",
      "name": "VS",
      "description": "Supply Voltage."
    },
    {
      "number": "6",
      "name": "CS",
      "description": "Chip Select."
    },
    {
      "number": "7",
      "name": "RESERVED",
      "description": "Reserved. This pin must be left open."
    },
    {
      "number": "8",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "9",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "10",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "11",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "12",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "13",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "14",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "15",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "16",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "17",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "18",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "19",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "20",
      "name": "INT1",
      "description": "Interrupt 1 Output."
    },
    {
      "number": "21",
      "name": "INT2",
      "description": "Interrupt 2 Output."
    },
    {
      "number": "22",
      "name": "RESERVED",
      "description": "Reserved. This pin must be connected to GND or left open."
    },
    {
      "number": "23",
      "name": "SDO\nALT ADDRESS ",
      "description": "Serial Data Output\nAlternate I2C Address Select."
    },
    {
      "number": "24",
      "name": "SDA\nSDI\nSDIO",
      "description": "Serial Data (I2C)\nSerial Data Input (SPI 4-Wire)\nSerial Data Input/Output (SPI 3-Wire)."
    },
    {
      "number": "25",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "26",
      "name": "SCL\nSCLK",
      "description": "I2C Serial Communications Clock\nSPI Serial Communications Clock."
    },
    {
      "number": "27",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "28",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "29",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "30",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "31",
      "name": "VDD I/O",
      "description": "Digital Interface Supply Voltage."
    },
    {
      "number": "32",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    }
  ],
  "version": "Rev. D",
  "url": "https://eu.mouser.com/datasheet/2/609/ADXL313-1503823.pdf",
  "pages": "6"
},
{
  "_id": {
    "$oid": "67fa84a29a2431d66f0bee56"
  },
  "name": "ADXL358",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "RANGE",
      "description": "Range Selection Pin. Set the RANGE pin to ground to select the ±10 g range or set the RANGE pin to VDDIO to select the ±20 g or ±40 g range. The RANGE pin is model dependent (see the Ordering Guide section)."
    },
    {
      "number": "2",
      "name": "ST1",
      "description": "Self Test Pin 1. The ST1 pin enables self test mode. The ST1 pin must be forced low when not in self test mode."
    },
    {
      "number": "3",
      "name": "ST2",
      "description": "Self Test Pin 2. The ST2 pin activates electromechanical self test actuation. The ST2 pin must be forced low when not in self test mode."
    },
    {
      "number": "4",
      "name": "TEMP",
      "description": "Temperature Sensor Output."
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Digital Interface Supply Voltage."
    },
    {
      "number": "6",
      "name": "VSSIO",
      "description": "Digital Ground."
    },
    {
      "number": "7",
      "name": "STBY",
      "description": "Standby or Measurement Mode Selection Pin. Set the STBY pin to ground to enter standby mode, or set the STBY pin to VDDIO to enter measurement mode."
    },
    {
      "number": "8",
      "name": "V1P8DIG",
      "description": "Digital Supply. The V1P8DIG pin requires a decoupling capacitor. If VSUPPLY connects to VSS, supply the voltage to the V1P8DIG pin externally."
    },
    {
      "number": "9",
      "name": "VSS",
      "description": "Analog Ground."
    },
    {
      "number": "10",
      "name": "V1P8ANA",
      "description": "Analog Supply. The V1P8ANA pin requires a decoupling capacitor. If VSUPPLY connects to VSS, supply the voltage to the V1P8ANA pin externally."
    },
    {
      "number": "11",
      "name": "VSUPPLY",
      "description": "Supply Voltage. When VSUPPLY equals 2.25 V to 3.6 V, VSUPPLY enables the internal LDO regulator to generate V1P8DIG and V1P8ANA. For VSUPPLY = VSS, V1P8DIG and V1P8ANA are externally supplied."
    },
    {
      "number": "12",
      "name": "XOUT",
      "description": "X-Axis Output."
    },
    {
      "number": "13",
      "name": "YOUT",
      "description": "Y-Axis Output."
    },
    {
      "number": "14",
      "name": "ZOUT",
      "description": "Z-Axis Output."
    }
  ],
  "version": "Rev. 0",
  "url": "https://eu.mouser.com/datasheet/2/609/adxl358-3218751.pdf",
  "pages": "6"
},
{
  "_id": {
    "$oid": "67fa85cf9a2431d66f0bee57"
  },
  "name": "ADXL314",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "This pin must be connected to ground."
    },
    {
      "number": "2",
      "name": "Reserved",
      "description": "Reserved. This pin must be connected to VS or left open."
    },
    {
      "number": "3",
      "name": "GND",
      "description": "This pin must be connected to ground."
    },
    {
      "number": "4",
      "name": "GND",
      "description": "This pin must be connected to ground."
    },
    {
      "number": "5",
      "name": "VS",
      "description": "Supply Voltage."
    },
    {
      "number": "7",
      "name": "Reserved",
      "description": "Reserved. This pin must be left open."
    },
    {
      "number": "8",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "9",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "10",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "11",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "12",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "13",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "14",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "15",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "16",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "17",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "18",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "19",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "20",
      "name": "INT1",
      "description": "Interrupt 1 Output."
    },
    {
      "number": "21",
      "name": "INT2",
      "description": "Interrupt 2 Output."
    },
    {
      "number": "22",
      "name": "Reserved",
      "description": "Reserved. This pin must be connected to GND or left open."
    },
    {
      "number": "23",
      "name": "SDO\nALT ADDRESS",
      "description": "Serial Data Out (SDO)\nAlternate I2C Address Select (ALT ADDRESS)."
    },
    {
      "number": "24",
      "name": "SDA\nSDI\nSDIO",
      "description": "Serial Data (SDA, I2C)\nSerial Data In (SDI, SPI 4-Wire)\nSerial Data In/Out (SDIO, SPI 3-Wire)."
    },
    {
      "number": "25",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "26",
      "name": "SCL\nSCLK",
      "description": "Serial Clock Line for I2C (SCL)\nSerial Clock Line for SPI (SCLK)."
    },
    {
      "number": "27",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "28",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "29",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "30",
      "name": "NC",
      "description": "No Connect. Do not connect to this pin."
    },
    {
      "number": "31",
      "name": "VDD I/O",
      "description": "Digital Interface Supply Voltage."
    },
    {
      "number": "32",
      "name": "NC",
      "description": "No Connect."
    }
  ],
  "version": "Rev. A",
  "url": "https://eu.mouser.com/datasheet/2/609/adxl314-3049361.pdf",
  "pages": "6"
},
{
  "_id": {
    "$oid": "67fd0fd69a2431d66f0bee58"
  },
  "name": "ADXL1001",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "2",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "3",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "4",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "5",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "6",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "7",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "8",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "9",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "10",
      "name": "DNC",
      "description": "Do Not Connect. Leave unconnected."
    },
    {
      "number": "11",
      "name": "DNC",
      "description": "Do Not Connect. Leave unconnected."
    },
    {
      "number": "12",
      "name": "VDD",
      "description": "3.0 V to 5.25 V Supply Voltage."
    },
    {
      "number": "13",
      "name": "VSS",
      "description": "Supply Ground."
    },
    {
      "number": "14",
      "name": "VSS",
      "description": "Supply Ground."
    },
    {
      "number": "15",
      "name": "STANDBY",
      "description": "Standby mode Input, Active High."
    },
    {
      "number": "16",
      "name": "ST",
      "description": "Self Test Input, Active High."
    },
    {
      "number": "17",
      "name": "DNC",
      "description": "Do Not Connect. Leave unconnected."
    },
    {
      "number": "18",
      "name": "DNC",
      "description": "Do Not Connect. Leave unconnected."
    },
    {
      "number": "19",
      "name": "DNC",
      "description": "Do Not Connect. Leave unconnected."
    },
    {
      "number": "20",
      "name": "OR",
      "description": "Overrange Output. This pin instantaneously indicates when the overrange detection circuit identifies significant overrange activity. This pin is not latched."
    },
    {
      "number": "21",
      "name": "DNC",
      "description": "Do Not Connect. Leave unconnected."
    },
    {
      "number": "22",
      "name": "DNC",
      "description": "Do Not Connect. Leave unconnected."
    },
    {
      "number": "23",
      "name": "DNC",
      "description": "Do Not Connect. Leave unconnected."
    },
    {
      "number": "24",
      "name": "DNC",
      "description": "Do Not Connect. Leave unconnected."
    },
    {
      "number": "25",
      "name": "DNC",
      "description": "Do Not Connect. Leave unconnected."
    },
    {
      "number": "26",
      "name": "DNC",
      "description": "Do Not Connect. Leave unconnected."
    },
    {
      "number": "27",
      "name": "VSS",
      "description": "Supply Ground."
    },
    {
      "number": "28",
      "name": "VSS",
      "description": "Supply Ground."
    },
    {
      "number": "29",
      "name": "DNC",
      "description": "Do Not Connect. Leave unconnected."
    },
    {
      "number": "30",
      "name": "VOUT",
      "description": "Analog Output Voltage."
    },
    {
      "number": "31",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "32",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "33",
      "name": "EPAD",
      "description": "Exposed Pad. The exposed pad on the bottom of the package must be connected to ground."
    }
  ],
  "version": "Rev. A",
  "url": "https://eu.mouser.com/datasheet/2/609/ADXL1001_1002-1503764.pdf",
  "pages": "6"
},
{
  "_id": {
    "$oid": "67fd12dd9a2431d66f0bee59"
  },
  "name": "ADXL343",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "VDD I/O",
      "description": "Digital Interface Supply Voltage."
    },
    {
      "number": "2",
      "name": "GND",
      "description": "This pin must be connected to ground"
    },
    {
      "number": "3",
      "name": "RESERVED",
      "description": "Reserved. This pin must be connected to VS or left open."
    },
    {
      "number": "4",
      "name": "GND",
      "description": "This pin must be connected to ground."
    },
    {
      "number": "5",
      "name": "GND",
      "description": "This pin must be connected to ground."
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Supply Voltage."
    },
    {
      "number": "7",
      "name": "CS",
      "description": "Chip Select."
    },
    {
      "number": "8",
      "name": "INT1",
      "description": "Interrupt 1 Output."
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Interrupt 2 Output."
    },
    {
      "number": "10",
      "name": "NC",
      "description": "Not Internally Connected."
    },
    {
      "number": "11",
      "name": "RESERVED",
      "description": "Reserved. This pin must be connected to ground or left open."
    },
    {
      "number": "12",
      "name": "SDO\nALT ADDRESS ",
      "description": "Serial Data Output (SPI 4-Wire)\nAlternate I2C Address Select (I2C)."
    },
    {
      "number": "13",
      "name": "SDA\nSDI\nSDIO",
      "description": "Serial Data (I2C)\nSerial Data Input (SPI 4-Wire)\nSerial Data Input and Output (SPI 3-Wire)."
    },
    {
      "number": "14",
      "name": "SCL/SCLK",
      "description": "Serial Communications Clock. SCL is the clock for I2C, and SCLK is the clock for SPI."
    }
  ],
  "version": "Rev. A",
  "url": "https://eu.mouser.com/datasheet/2/609/ADXL343-1503782.pdf",
  "pages": "6"
},
{
  "_id": {
    "$oid": "67fd14409a2431d66f0bee5a"
  },
  "name": "ADXL344",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "VDD I/O",
      "description": "Digital Interface Supply Voltage."
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not Internally Connected."
    },
    {
      "number": "3",
      "name": "NC",
      "description": "Not Internally Connected."
    },
    {
      "number": "4",
      "name": "SCL/SCLK",
      "description": "Serial Communications Clock."
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Not Internally Connected."
    },
    {
      "number": "6",
      "name": "SDA\nSDI\nSDIO",
      "description": "Serial Data (I2C)\nSerial Data Input (SPI 4-Wire)\nSerial Data Input and Output (SPI 3-Wire)."
    },
    {
      "number": "7",
      "name": "SDO\nALT ADDRESS",
      "description": "Serial Data Output (SPI 4-Wire)\nAlternate I2C Address Select (I2C)."
    },
    {
      "number": "8",
      "name": "CS",
      "description": "Chip Select."
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Interrupt 2 Output."
    },
    {
      "number": "10",
      "name": "NC",
      "description": "Not Internally Connected."
    },
    {
      "number": "11",
      "name": "INT1",
      "description": "Interrupt 1 Output."
    },
    {
      "number": "12",
      "name": "GND",
      "description": "Must be connected to ground."
    },
    {
      "number": "13",
      "name": "GND",
      "description": "Must be connected to ground."
    },
    {
      "number": "14",
      "name": "VS",
      "description": "Supply Voltage."
    },
    {
      "number": "15",
      "name": "RESERVED",
      "description": "Reserved. This pin must be connected to VS."
    },
    {
      "number": "16",
      "name": "GND",
      "description": "Must be connected to ground."
    }
  ],
  "version": "Rev. 0",
  "url": "https://eu.mouser.com/datasheet/2/609/ADXL344-1503662.pdf",
  "pages": "6"
},
{
  "_id": {
    "$oid": "67fd16689a2431d66f0bee5b"
  },
  "name": "ADXL350",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "VDD I/O",
      "description": "Digital Interface Supply Voltage."
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not Internally Connected."
    },
    {
      "number": "3",
      "name": "NC",
      "description": "Not Internally Connected."
    },
    {
      "number": "4",
      "name": "SCL/SCLK",
      "description": "Serial Communications Clock."
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Not Internally Connected."
    },
    {
      "number": "6",
      "name": "SDA\nSDI\nSDIO",
      "description": "Serial Data (I2C)\nSerial Data Input (SPI 4-Wire)\nSerial Data Input and Output (SPI 3-Wire)."
    },
    {
      "number": "7",
      "name": "SDO\nALT ADDRESS",
      "description": "Serial Data Output\nAlternate I2C Address Select."
    },
    {
      "number": "8",
      "name": "CS",
      "description": "Chip Select."
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Interrupt 2 Output."
    },
    {
      "number": "10",
      "name": "RESERVED",
      "description": "Reserved. This pin must be connected to ground or left open."
    },
    {
      "number": "11",
      "name": "INT1",
      "description": "Interrupt 1 Output."
    },
    {
      "number": "12",
      "name": "RESERVED",
      "description": "Reserved. This pin must be connected to ground."
    },
    {
      "number": "13",
      "name": "GND",
      "description": "This pin must be connected to ground."
    },
    {
      "number": "14",
      "name": "VS",
      "description": "Supply Voltage."
    },
    {
      "number": "15",
      "name": "RESERVED",
      "description": "Reserved. This pin must be connected to VS or left open."
    },
    {
      "number": "16",
      "name": "GND",
      "description": "This pin must be connected to ground."
    }
  ],
  "version": "Rev. 0",
  "url": "https://eu.mouser.com/datasheet/2/609/ADXL350-1503694.pdf",
  "pages": "5"
},
{
  "_id": {
    "$oid": "67fd17529a2431d66f0bee5c"
  },
  "name": "ADXL345",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "RANGE",
      "description": "Range Selection Pin. Set this pin to ground to select the ±2 g range, or set this pin to VDDIO to select the ±4 g or ±8 g range. This pin is model dependent (see the Ordering Guide section). "
    },
    {
      "number": "2",
      "name": "ST1",
      "description": "Self Test Pin 1. This pin enables self test mode. This pin must be forced low when not in self test mode. "
    },
    {
      "number": "3",
      "name": "ST2",
      "description": "Self Test Pin 2. This pin activates electromechanical self test actuation. This pin must be forced low when not in self test mode."
    },
    {
      "number": "4",
      "name": "TEMP",
      "description": "Temperature Sensor Output."
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Digital Interface Supply Voltage."
    },
    {
      "number": "6",
      "name": "VSSIO",
      "description": "Digital Ground."
    },
    {
      "number": "7",
      "name": "STBY",
      "description": "Standby or Measurement Mode Selection Pin. Set this pin to ground to enter standby mode, or set this pin to VDDIO to enter measurement mode. "
    },
    {
      "number": "8",
      "name": "V1P8DIG",
      "description": "Digital Supply. This pin requires a decoupling capacitor. If VSUPPLY connects to VSS, supply the voltage to this pin externally."
    },
    {
      "number": "9",
      "name": "VSS",
      "description": "Analog Ground."
    },
    {
      "number": "10",
      "name": "V1P8ANA",
      "description": "Analog Supply. This pin requires a decoupling capacitor. If VSUPPLY connects to VSS, supply the voltage to this pin externally."
    },
    {
      "number": "11",
      "name": "VSUPPLY",
      "description": "Supply Voltage. When VSUPPLY equals 2.25 V to 3.6 V, VSUPPLY enables the internal LDO regulators to generate V1P8DIG and V1P8ANA. For VSUPPLY = VSS, V1P8DIG and V1P8ANA are externally supplied."
    },
    {
      "number": "12",
      "name": "XOUT",
      "description": "X-Axis Output."
    },
    {
      "number": "13",
      "name": "YOUT",
      "description": "Y-Axis Output."
    },
    {
      "number": "14",
      "name": "ZOUT",
      "description": "Z-Axis Output."
    }
  ],
  "version": "Rev. B",
  "url": "https://eu.mouser.com/datasheet/2/609/adxl354_adxl355-2036921.pdf",
  "pages": "10"
},
{
  "_id": {
    "$oid": "67fd18e79a2431d66f0bee5d"
  },
  "name": "ADXL367",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCLK",
      "description": "SPI Communication Clock. Tied low for I2C."
    },
    {
      "number": "2",
      "name": "MOSI\nSDA",
      "description": "Master Output, Slave Input (MOSI)\nI2C Serial Data (SDA)."
    },
    {
      "number": "3",
      "name": "MISO\nASEL",
      "description": "Master Input, Slave Output (MISO).\nI2C Address Select (ASEL)."
    },
    {
      "number": "4",
      "name": "CS\nSCL",
      "description": "SPI Chip Select, Active Low (CS).\nI2C Clock (SCL)."
    },
    {
      "number": "5",
      "name": "INT1",
      "description": "Interrupt 1 Output. INT1 also serves as an input for external clocking."
    },
    {
      "number": "6",
      "name": "INT2",
      "description": "Interrupt 2 Output. INT2 also serves as an input for synchronized sampling."
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground. This pin must be grounded."
    },
    {
      "number": "8",
      "name": "ADC_IN",
      "description": "ADC Input Pin. Can be left unconnected, or connected to Pin 7 and/or Pin 11."
    },
    {
      "number": "9",
      "name": "VREG_OUT",
      "description": "Internally Regulated Voltage."
    },
    {
      "number": "10",
      "name": "VS",
      "description": "Supply Voltage."
    },
    {
      "number": "11",
      "name": "GND",
      "description": "Ground. This pin must be grounded."
    },
    {
      "number": "12",
      "name": "VDD",
      "description": "Supply Voltage for Digital I/O."
    }
  ],
  "version": "Rev. A",
  "url": "https://eu.mouser.com/datasheet/2/609/adxl367-2936346.pdf",
  "pages": "12"
},
{
  "_id": {
    "$oid": "67fd19f99a2431d66f0bee5e"
  },
  "name": "ADXL1004",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "2",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "3",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "4",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "5",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "6",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "7",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "8",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "9",
      "name": "NIC",
      "description": "Not Internally Connected."
    },
    {
      "number": "10",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "11",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "12",
      "name": "VDD",
      "description": "3 V to 5.25 V Supply Voltage."
    },
    {
      "number": "13",
      "name": "VSS",
      "description": "Supply Ground."
    },
    {
      "number": "14",
      "name": "VSS",
      "description": "Supply Ground."
    },
    {
      "number": "15",
      "name": "STANDBY",
      "description": "Standby Mode Input, Active High."
    },
    {
      "number": "16",
      "name": "ST",
      "description": "Self Test Input, Active High."
    },
    {
      "number": "17",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "18",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "19",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "20",
      "name": "OR",
      "description": "Overrange Output. This pin instantaneously indicates when the overrange detection circuit identifies significant overrange activity. This pin is not latched."
    },
    {
      "number": "21",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "22",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "23",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "24",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "25",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "26",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "27",
      "name": "VSS",
      "description": "Supply Ground"
    },
    {
      "number": "28",
      "name": "VSS",
      "description": "Supply Ground."
    },
    {
      "number": "29",
      "name": "DNC",
      "description": "Do Not Connect. Leave this pin unconnected."
    },
    {
      "number": "30",
      "name": "XOUT",
      "description": "Analog Output Voltage."
    }
  ],
  "version": "Rev. A",
  "url": "https://eu.mouser.com/datasheet/2/609/adxl1004-1503778.pdf",
  "pages": "6"
},
{
  "_id": {
    "$oid": "67fd1ad39a2431d66f0bee5f"
  },
  "name": "MXA2500E",
  "manufacturer": "MEMSIC",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "TOUT",
      "description": "Temperature (Analog Voltage)"
    },
    {
      "number": "2",
      "name": "AOUTY",
      "description": "Y-Axis Acceleration Signal"
    },
    {
      "number": "3",
      "name": "Gnd",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "VDA",
      "description": "Analog Supply Voltage "
    },
    {
      "number": "5",
      "name": "AOUTX",
      "description": "X-Axis Acceleration Signal"
    },
    {
      "number": "6",
      "name": "Vref",
      "description": "2.5V Reference Output"
    },
    {
      "number": "7",
      "name": "Sck",
      "description": "Optional External Clock"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Digital Supply Voltage"
    }
  ],
  "version": "Rev. G",
  "url": "https://eu.mouser.com/datasheet/2/821/mcic_s_a0004994793_1-2295249.pdf",
  "pages": "3"
},
{
  "_id": {
    "$oid": "67fd1bda9a2431d66f0bee60"
  },
  "name": "MXP7205VW",
  "manufacturer": "MEMSIC",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "MISO",
      "description": "Master In - Slave Out"
    },
    {
      "number": "2",
      "name": "VDA",
      "description": "Analog Supply"
    },
    {
      "number": "3",
      "name": "VDD",
      "description": "Digital Supply, VDA and VDD must be the same voltage"
    },
    {
      "number": "4",
      "name": "FM",
      "description": "Factory mode (for factory test only). Connect to VSS"
    },
    {
      "number": "5/J",
      "name": "SCK",
      "description": "Clock Input"
    },
    {
      "number": "6/M",
      "name": "SSB",
      "description": "Slave Select Bar (active low)"
    },
    {
      "number": "7/L",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "8/K",
      "name": "MOSI",
      "description": "Master Out - Slave In"
    }
  ],
  "version": "Rev. D",
  "url": "https://eu.mouser.com/datasheet/2/821/mcic_s_a0006157102_1-2295528.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "67fd1d019a2431d66f0bee61"
  },
  "name": "MXC6255XU",
  "manufacturer": "MEMSIC",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "INT",
      "description": "This pin is the DTOS interrupt output. The logic level on this pin reflects the state of the INT bit in the STATUS register. INT is set when the orientation differs from the last orientation read by the processor, or a shake event is detected. INT is cleared upon reading of the STATUS register. "
    },
    {
      "number": "2",
      "name": "NC",
      "description": "During normal operation, this pin must be left floating."
    },
    {
      "number": "3",
      "name": "VDD",
      "description": "This is the power supply input. The DC voltage should be between 2.5 and 5.5 volts."
    },
    {
      "number": "4",
      "name": "I2C SCL",
      "description": "This pin is the serial clock line for the I2C interface. Since the DTOS only operates as a slave device, this pin is always an input."
    },
    {
      "number": "5",
      "name": "I2C SDA",
      "description": "This pin is the serial data line for the I2C interface. It is an I/O pin that functions as an input during a write, and an output during a read from the DTOS. "
    },
    {
      "number": "6",
      "name": "GND",
      "description": "This is the ground pin for the DTOS."
    }
  ],
  "version": "B",
  "url": "https://eu.mouser.com/datasheet/2/821/mcic_s_a0001757036_1-2295164.pdf",
  "pages": "3"
},
{
  "_id": {
    "$oid": "67fd1dc29a2431d66f0bee62"
  },
  "name": "MXC6244AU",
  "manufacturer": "MEMSIC",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "INT",
      "description": "Interrupt Output. This pin will be low under normal operation, and will transition to high to alert to a tip-over\nevent. A high impedance\nstate reflects a fault condition\nin the sensor. This pin can be\nleft open if not used."
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Factory Use, connect to ground"
    },
    {
      "number": "3",
      "name": "VDD",
      "description": "Positive power supply. Connect to 2.7V to 5.5V. Bypass this to ground using a tbd capacitor"
    },
    {
      "number": "4",
      "name": "SCK",
      "description": "I2C clock input"
    },
    {
      "number": "5",
      "name": "SDA",
      "description": "I2C data pin (input/output)"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Connect to power supply ground."
    }
  ],
  "version": "Rev. C",
  "url": "https://eu.mouser.com/datasheet/2/821/mcic_s_a0004994790_1-2295235.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "67fd1e699a2431d66f0bee63"
  },
  "name": "MXD2020E",
  "manufacturer": "MEMSIC",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "TOUT",
      "description": "Temperature (Analog Voltage)"
    },
    {
      "number": "2",
      "name": "DOUTY",
      "description": "Y-Axis Acceleration Digital Signal"
    },
    {
      "number": "3",
      "name": "Gnd",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "VDA",
      "description": "Analog Supply Voltage"
    },
    {
      "number": "5",
      "name": "DOUTX",
      "description": "X-Axis Acceleration Digital Signal"
    },
    {
      "number": "6",
      "name": "Vref",
      "description": "2.5V Reference Output"
    },
    {
      "number": "7",
      "name": "Sck",
      "description": "Optional External Clock"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Digital Supply Voltage"
    }
  ],
  "version": "Rev H",
  "url": "https://eu.mouser.com/datasheet/2/821/MXD2020E_26FRev-3075526.pdf",
  "pages": "3"
},
{
  "_id": {
    "$oid": "67fd1f579a2431d66f0bee64"
  },
  "name": "MC3419",
  "manufacturer": "MEMSIC",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "DOUT_A6",
      "description": "SPI data output I2C address bit 6"
    },
    {
      "number": "2",
      "name": "DIN_SDA",
      "description": "SPI data In I2C serial data input/output"
    },
    {
      "number": "3",
      "name": "NC",
      "description": "No connect"
    },
    {
      "number": "4",
      "name": "VPP",
      "description": "Connect to GND"
    },
    {
      "number": "5",
      "name": "INTN 1",
      "description": "Interrupt active LOW"
    },
    {
      "number": "6",
      "name": "INTN 2",
      "description": "Interrupt active LOW"
    },
    {
      "number": "7",
      "name": "VDD",
      "description": "Power supply for internal"
    },
    {
      "number": "8",
      "name": "NC",
      "description": "No Connect"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "10",
      "name": "CSN",
      "description": "SPI chip select (active low)"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "No connect"
    },
    {
      "number": "12",
      "name": "SCK_SCL",
      "description": "I2C/SPI serial clock input"
    }
  ],
  "version": "v1.1",
  "url": "https://eu.mouser.com/datasheet/2/821/MEMSIC_MC3419_Datasheet-1889799.pdf",
  "pages": "9"
},
{
  "_id": {
    "$oid": "67fd1fee9a2431d66f0bee65"
  },
  "name": "MC3630",
  "manufacturer": "MEMSIC",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "DOUT_A1",
      "description": "SPI data output\nI2C address bit 1"
    },
    {
      "number": "2",
      "name": "DIN_SDA",
      "description": "SPI data In\nI2C serial data input/output"
    },
    {
      "number": "3",
      "name": "VDDIO",
      "description": "Power supply for interface"
    },
    {
      "number": "4",
      "name": "VPP",
      "description": "Connect to GND"
    },
    {
      "number": "5",
      "name": "INTN",
      "description": "Interrupt active LOW"
    },
    {
      "number": "6",
      "name": "NC",
      "description": "No connect"
    },
    {
      "number": "7",
      "name": "VDD",
      "description": "Power supply for internal"
    },
    {
      "number": "8",
      "name": "NC",
      "description": "No connect"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "10",
      "name": "CSN",
      "description": "SPI chip select"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "No connect"
    },
    {
      "number": "12",
      "name": "SCK_SCL",
      "description": "SPI Clock\nI2C serial clock input"
    }
  ],
  "version": "v1.6",
  "url": "https://eu.mouser.com/datasheet/2/821/MEMSIC_MC3630-1878909.pdf",
  "pages": "9"
},
{
  "_id": {
    "$oid": "67fd20489a2431d66f0bee66"
  },
  "name": "MXC400xXC",
  "manufacturer": "MEMSIC",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCL",
      "description": "Serial Clock Line for I2C bus"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "No Connection"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Connected to Ground"
    },
    {
      "number": "4",
      "name": "INT",
      "description": "Interrupt Output"
    },
    {
      "number": "5",
      "name": "SDA",
      "description": "Serial Data Line for I2C bus"
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "1.62 V to 3.6 V"
    }
  ],
  "version": "Rev. B",
  "url": "https://eu.mouser.com/datasheet/2/821/Memsic_08302019_MXC400xXC_Datasheet_Rev_B-1892039.pdf",
  "pages": "3"
},
{
  "_id": {
    "$oid": "67fd20cb9a2431d66f0bee67"
  },
  "name": "MXR7305VF",
  "manufacturer": "MEMSIC",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "STIN",
      "description": "Self -Test Input"
    },
    {
      "number": "2",
      "name": "CLK",
      "description": "To be grounded. (Optional Serial Clock Input)"
    },
    {
      "number": "3",
      "name": "COM",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "NC",
      "description": "No Connect"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "No Connect"
    },
    {
      "number": "6",
      "name": "YOUT",
      "description": "Y-Channel Ratiometric Output"
    },
    {
      "number": "7",
      "name": "XOUT",
      "description": "X-Channel Ratiometric Output"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Supply Voltage 4.5 to 5.25 V"
    }
  ],
  "version": "Rev. A",
  "url": "https://eu.mouser.com/datasheet/2/821/mcic_s_a0004994860_1-2295205.pdf",
  "pages": "3"
},
{
  "_id": {
    "$oid": "67fd21579a2431d66f0bee68"
  },
  "name": "MC3479",
  "manufacturer": "MEMSIC",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SCK_SCL",
      "description": "I2C/SPI serial clock input"
    },
    {
      "number": "2",
      "name": "CSN",
      "description": "SPI chip select (active low)"
    },
    {
      "number": "3",
      "name": "DOUT_A6",
      "description": "SPI data output\nI2C address bit 6"
    },
    {
      "number": "4",
      "name": "DIN_SDA",
      "description": "SPI data In\nI2C serial data input/output"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "No connect"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "7",
      "name": "VPP",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "NC",
      "description": "No connect"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply for internal"
    },
    {
      "number": "10",
      "name": "NC",
      "description": "No Connect"
    },
    {
      "number": "11",
      "name": "INTN 2",
      "description": "Interrupt active LOW"
    },
    {
      "number": "12",
      "name": "INTN 1",
      "description": "Interrupt active LOW"
    }
  ],
  "version": "v1.1",
  "url": "https://eu.mouser.com/datasheet/2/821/20200827164636363-1900743.pdf",
  "pages": "9"
},
{
  "_id": {
    "$oid": "67fd21e89a2431d66f0bee69"
  },
  "name": "MC3635",
  "manufacturer": "MEMSIC",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "DOUT_A1",
      "description": "SPI data output\nI2C address bit 1"
    },
    {
      "number": "2",
      "name": "DIN_SDA",
      "description": "SPI data In\nI2C serial data input/output"
    },
    {
      "number": "3",
      "name": "NC",
      "description": "No connect"
    },
    {
      "number": "4",
      "name": "VPP",
      "description": "Connect to GND"
    },
    {
      "number": "5",
      "name": "INTN",
      "description": "Interrupt active LOW"
    },
    {
      "number": "6",
      "name": "VDDIO",
      "description": "Power supply for interface"
    },
    {
      "number": "7",
      "name": "VDD",
      "description": "Power supply for internal"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "9",
      "name": "CSN",
      "description": "SPI Chip Select"
    },
    {
      "number": "10",
      "name": "SCK_SCL",
      "description": "SPI Clock\nI2C serial clock input"
    }
  ],
  "version": "v1.8",
  "url": "https://eu.mouser.com/datasheet/2/821/MEMSIC_MC3635_Datasheet-1878925.pdf",
  "pages": "9"
},
{
  "_id": {
    "$oid": "67fd22599a2431d66f0bee6a"
  },
  "name": "MXC6655XA",
  "manufacturer": "MEMSIC",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "NC",
      "description": "No Connection"
    },
    {
      "number": "2",
      "name": "SDA",
      "description": "Serial Data Line for I2C bus"
    },
    {
      "number": "3",
      "name": "NC",
      "description": "No Connection"
    },
    {
      "number": "4",
      "name": "NC",
      "description": "No Connection"
    },
    {
      "number": "5",
      "name": "INT",
      "description": "Interrupt Output"
    },
    {
      "number": "6",
      "name": "NC",
      "description": "No Connection"
    },
    {
      "number": "7",
      "name": "VDD",
      "description": "1.62 V to 3.6 V "
    },
    {
      "number": "8",
      "name": "NC",
      "description": "No Connection"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "Connected to Ground"
    },
    {
      "number": "10",
      "name": "NC",
      "description": "No Connection"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "No Connection"
    },
    {
      "number": "12",
      "name": "SCL",
      "description": "Serial Clock Line for I2C bus"
    }
  ],
  "version": "Rev A",
  "url": "https://eu.mouser.com/datasheet/2/821/Memsic_03272020_MXC6655XA_Datasheet_Rev_A-1823835.pdf",
  "pages": "3"
},
{
  "_id": {
    "$oid": "67fe312b9a2431d66f0bee6b"
  },
  "name": "KXTJ3-1057",
  "manufacturer": "ROHM",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "ADDR",
      "description": "I2C Address pin. This pin must be connected to IO_VDD or GND to determine the I2C Device Address."
    },
    {
      "number": "2",
      "name": "SDA",
      "description": "I2C Serial Data"
    },
    {
      "number": "3",
      "name": "IO_VDD",
      "description": "The power supply input for the digital communication bus. Optionally decouple this pin to ground with a 0.1uF ceramic capacitor. (Internally tied to Pin 11)"
    },
    {
      "number": "4",
      "name": "RES",
      "description": "Reserved. Connect to GND. Optionally, can be connected to IO_VDD or VDD. Do not leave floating."
    },
    {
      "number": "5",
      "name": "INT",
      "description": "Physical Interrupt pin (Push-Pull). Leave floating if not used."
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Ground. (Internally tied to Pins 8, 9)"
    },
    {
      "number": "7",
      "name": "VDD",
      "description": "The power supply input. Decouple this pin to ground with a 0.1uF ceramic capacitor. (Internally tied to Pin 10)"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Ground. (Internally tied to Pins 6, 9)"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "Ground. (Internally tied to Pins 6, 8)"
    },
    {
      "number": "10",
      "name": "VDD",
      "description": "The power supply input. Decouple this pin to ground with a 0.1uF ceramic capacitor. (Internally tied to Pin 7)"
    },
    {
      "number": "11",
      "name": "VDD",
      "description": "The power supply input for the digital communication bus. Optionally decouple this pin to ground with a 0.1uF ceramic capacitor. (Internally tied to Pin 3)"
    },
    {
      "number": "12",
      "name": "SCL",
      "description": "I2C Serial Clock"
    }
  ],
  "version": "Rev. 7.0",
  "url": "https://fscdn.rohm.com/kionix/en/datasheet/kxtj3-1057-e.pdf",
  "pages": "12"
},
{
  "_id": {
    "$oid": "67fe33f39a2431d66f0bee6c"
  },
  "name": "KX132ACR-LBZ",
  "manufacturer": "ROHM",
  "type": "Sensor, Motion, Accelerometer",
  "pins": [
    {
      "number": "1",
      "name": "SDO/ADDR",
      "description": "Serial Data Out pin during 4-wire SPI communication and the LSB(Least Significant Bit) setting pin of the Target address during I2C communication. Do not leave floating when using I2C communication. Pull-up or pull-down when using 4-wire or 3-wire SPI communication."
    },
    {
      "number": "3",
      "name": "SDI/SDA",
      "description": "SPI Data input / I2C Serial Data pin. Do not leave floating."
    },
    {
      "number": "4",
      "name": "IO_VDD",
      "description": "Power voltage pin."
    },
    {
      "number": "5",
      "name": "TRIG",
      "description": "Trigger pin for FIFO buffer control. Connect to GND when not using external trigger option."
    },
    {
      "number": "5",
      "name": "INT1",
      "description": "Physical Interrupt. The pin is in High-impedance state during Power-on sequence and is driven following Power-on sequence. Leave floating if not used."
    },
    {
      "number": "6",
      "name": "INT2",
      "description": "Physical Interrupt. The pin is in High-impedance state during Power-on sequence and is driven following Power-on sequence. Leave floating if not used."
    },
    {
      "number": "7",
      "name": "VDD",
      "description": "Power voltage pin."
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "10",
      "name": "nCS",
      "description": "Chip Select (active LOW) for SPI communication. Connect to IO_VDD for I2C communication. Do not leave floating."
    },
    {
      "number": "11",
      "name": "N.C.",
      "description": "Not internally connected. Can be connected to VDD, IO_VDD, GND."
    },
    {
      "number": "12",
      "name": "SCLK/SCL",
      "description": "SPI and I2C Serial Clock pin. Do not leave floating."
    }
  ],
  "version": "10.May.2024 Rev.002",
  "url": "https://fscdn.rohm.com/kionix/en/datasheet/kx132acr-lbz-e.pdf",
  "pages": "3"
},
{
  "_id": {
    "$oid": "67fe35949a2431d66f0bee6d"
  },
  "name": "ADIS16260",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Gyroscope",
  "pins": [
    {
      "number": "1",
      "name": "SCLK",
      "description": "SPI Serial Clock."
    },
    {
      "number": "2",
      "name": "DOUT",
      "description": "SPI Data Output. Clocks output on SCLK falling edge."
    },
    {
      "number": "3",
      "name": "DIN",
      "description": "SPI Data Input. Clocks input on SCLK rising edge."
    },
    {
      "number": "4",
      "name": "CS",
      "description": "SPI Chip Select. Active low."
    },
    {
      "number": "5",
      "name": "DIO1",
      "description": "Configurable Digital Input/Output."
    },
    {
      "number": "6",
      "name": "DIO2",
      "description": "Configurable Digital Input/Output."
    },
    {
      "number": "7",
      "name": "RST",
      "description": "Reset. Active low."
    },
    {
      "number": "8",
      "name": "DNC",
      "description": "Do Not Connect."
    },
    {
      "number": "9",
      "name": "DNC",
      "description": "Do Not Connect."
    },
    {
      "number": "10",
      "name": "DNC",
      "description": "Do Not Connect."
    },
    {
      "number": "11",
      "name": "DNC",
      "description": "Do Not Connect."
    },
    {
      "number": "12",
      "name": "AUX DAC",
      "description": "Auxiliary DAC Output."
    },
    {
      "number": "13",
      "name": "AUX ADC",
      "description": "Auxiliary ADC Input."
    },
    {
      "number": "14",
      "name": "RATE",
      "description": "Rate Output. For bandwidth reduction only; output is not specified. "
    },
    {
      "number": "15",
      "name": "FILT",
      "description": "Filter Terminal."
    },
    {
      "number": "16",
      "name": "VCC",
      "description": "5.0 V Power Supply."
    },
    {
      "number": "17",
      "name": "VCC",
      "description": "5.0 V Power Supply."
    },
    {
      "number": "18",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "19",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "20",
      "name": "VREF",
      "description": "Precision Reference Output."
    }
  ],
  "version": "Rev. F",
  "url": "https://eu.mouser.com/datasheet/2/609/ADIS16260_16265-1503083.pdf",
  "pages": "7"
},
{
  "_id": {
    "$oid": "67fe36eb9a2431d66f0bee6e"
  },
  "name": "ADIS16137",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Gyroscope",
  "pins": [
    {
      "number": "1",
      "name": "DIO3",
      "description": "Configurable Digital Input/Output."
    },
    {
      "number": "2",
      "name": "DIO4\nCLKIN",
      "description": "Configurable Digital Input/Output\nClock Input. "
    },
    {
      "number": "3",
      "name": "SCLK",
      "description": "SPI Serial Clock."
    },
    {
      "number": "4",
      "name": "DOUT",
      "description": "SPI Data Output. Clocks output on SCLK falling edge."
    },
    {
      "number": "5",
      "name": "DIN",
      "description": "SPI Data Input. Clocks input on SCLK rising edge."
    },
    {
      "number": "6",
      "name": "CS",
      "description": "SPI Chip Select."
    },
    {
      "number": "7",
      "name": "DIO1",
      "description": "Configurable Digital Input/Output."
    },
    {
      "number": "8",
      "name": "RST",
      "description": "Reset."
    },
    {
      "number": "9",
      "name": "DIO2",
      "description": "Configurable Digital Input/Output."
    },
    {
      "number": "10",
      "name": "VDD",
      "description": "Power Supply."
    },
    {
      "number": "11",
      "name": "VDD",
      "description": "Power Supply."
    },
    {
      "number": "12",
      "name": "VDD",
      "description": "Power Supply."
    },
    {
      "number": "13",
      "name": "GND",
      "description": "Power Ground."
    },
    {
      "number": "14",
      "name": "GND",
      "description": "Power Ground."
    },
    {
      "number": "15",
      "name": "GND",
      "description": "Power Ground."
    },
    {
      "number": "16",
      "name": "DNC",
      "description": "Do Not Connect. Do not connect to these pins."
    },
    {
      "number": "17",
      "name": "DNC",
      "description": "Do Not Connect. Do not connect to these pins."
    },
    {
      "number": "18",
      "name": "DNC",
      "description": "Do Not Connect. Do not connect to these pins."
    },
    {
      "number": "19",
      "name": "DNC",
      "description": "Do Not Connect. Do not connect to these pins."
    },
    {
      "number": "20",
      "name": "DNC",
      "description": "Do Not Connect. Do not connect to these pins."
    },
    {
      "number": "21",
      "name": "DNC",
      "description": "Do Not Connect. Do not connect to these pins."
    },
    {
      "number": "22",
      "name": "DNC",
      "description": "Do Not Connect. Do not connect to these pins."
    },
    {
      "number": "23",
      "name": "DNC",
      "description": "Do Not Connect. Do not connect to these pins."
    },
    {
      "number": "24",
      "name": "DNC",
      "description": "Do Not Connect. Do not connect to these pins."
    }
  ],
  "version": "Rev. A",
  "url": "https://eu.mouser.com/datasheet/2/609/ADIS16137-1502995.pdf",
  "pages": "6"
},
{
  "_id": {
    "$oid": "67fe38869a2431d66f0bee6f"
  },
  "name": " SCC400T",
  "manufacturer": "Murata",
  "type": "Sensor, Motion, Gyroscope",
  "pins": [
    {
      "number": "1",
      "name": "GNDA",
      "description": "EMC protection and ground"
    },
    {
      "number": "2",
      "name": "RESERVED",
      "description": "Factory use only, connect to GND"
    },
    {
      "number": "3",
      "name": "TI/EXTRESN",
      "description": "Optional external Reset, 3.3V logic compatible Schmitt-trigger input with\ninternal pull-up, LOW-HIGH transition causes system restart. Minimum\nlow time 100us."
    },
    {
      "number": "4",
      "name": "RESERVED",
      "description": "Factory use only, connect to GND"
    },
    {
      "number": "5",
      "name": "RESERVED",
      "description": "Factory use only, connect to GND"
    },
    {
      "number": "6",
      "name": "VDDA",
      "description": "Regulated supply for analog core. Use external capacitor which is connected according to the diagram in Figure 18."
    },
    {
      "number": "7",
      "name": "GNDA",
      "description": "Analog Supply return (ground), connect externally to GND"
    },
    {
      "number": "8",
      "name": "GNDA",
      "description": "Analog Supply return (ground), connect externally to GND"
    },
    {
      "number": "9",
      "name": "VDDD",
      "description": "Regulated supply for digital core. Use external capacitor which is connected according to the diagram in Figure 18."
    },
    {
      "number": "10",
      "name": "GNDD",
      "description": "Digital Supply return (ground), connect externally to GND"
    },
    {
      "number": "11",
      "name": "V3p3A",
      "description": "Analog Supply voltage"
    },
    {
      "number": "12",
      "name": "V3p3D",
      "description": "Digital Supply voltage"
    },
    {
      "number": "13",
      "name": "MISO",
      "description": "Data Out of SPI Interface"
    },
    {
      "number": "14",
      "name": "SCK",
      "description": "Clock Signal of SPI Interface"
    },
    {
      "number": "15",
      "name": "CSB",
      "description": "Chip Selected of SPI Interface"
    },
    {
      "number": "16",
      "name": "MOSI",
      "description": "Data In of SPI Interface"
    }
  ],
  "version": "Rev. 1",
  "url": "https://eu.mouser.com/datasheet/2/281/1/Murata_11_15_2022_datasheet_scc400t_series_short-3074597.pdf",
  "pages": "14"
},
{
  "_id": {
    "$oid": "67fe3ac69a2431d66f0bee71"
  },
  "name": "SCR2100-D08",
  "manufacturer": "Murata",
  "type": "Sensor, Motion, Gyroscope",
  "pins": [
    {
      "number": "1",
      "name": "HEAT",
      "description": "Heat sink connection, connect externally to AVSS"
    },
    {
      "number": "2",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    },
    {
      "number": "3",
      "name": "EXTRESN",
      "description": "External Reset, 3.3V logic compatible Schmitt-trigger input with internal pull-up, LOW-HIGH transition causes system restart. Minimum low time 100us"
    },
    {
      "number": "4",
      "name": "SCK",
      "description": "CLK signal of SPI Interface"
    },
    {
      "number": "5",
      "name": "MISO",
      "description": "Data Out of SPI Interface"
    },
    {
      "number": "6",
      "name": "VBOOST",
      "description": "External capacitor connection for high voltage analog supply, high voltage pad ≈30V"
    },
    {
      "number": "7",
      "name": "LBOOST",
      "description": "Connection for inductor for high voltage generation, high voltage pad ≈30V"
    },
    {
      "number": "8",
      "name": "DVSS",
      "description": "Digital Supply Return, connect externally to AVSS"
    },
    {
      "number": "9",
      "name": "DVDD",
      "description": "Digital Supply Voltage"
    },
    {
      "number": "10",
      "name": "D_EXTC",
      "description": "External capacitor connection for digital core (typ. 1.8V)"
    },
    {
      "number": "11",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    },
    {
      "number": "12",
      "name": "HEAT",
      "description": "Heat sink connection, connect externally to AVSS"
    },
    {
      "number": "13",
      "name": "HEAT",
      "description": "Heat sink connection, connect externally to AVSS"
    },
    {
      "number": "14",
      "name": "AVDD",
      "description": "Analog Supply voltage"
    },
    {
      "number": "15",
      "name": "A_EXTC",
      "description": "External capacitor connection for positive reference voltage"
    },
    {
      "number": "16",
      "name": "AVSS_REF",
      "description": "Analog reference ground, connect externally to AVSS"
    },
    {
      "number": "17",
      "name": "AVSS",
      "description": "Analog Supply Return, connect externally to DVSS"
    },
    {
      "number": "18",
      "name": "CSB",
      "description": "Chip Select of SPI Interface, 3.3V logic compatible Schmitt-trigger input"
    },
    {
      "number": "19",
      "name": "MOSI",
      "description": "Data In of SPI Interface, 3.3V logic compatible Schmitt-trigger input"
    },
    {
      "number": "20",
      "name": "RESERVED",
      "description": "Factory use only, leave floating or connect to GND"
    },
    {
      "number": "21",
      "name": "RESERVED",
      "description": "Factory use only, leave floating or connect to GND"
    },
    {
      "number": "22",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    },
    {
      "number": "23",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    }
  ],
  "version": "Rev. B0",
  "url": "https://eu.mouser.com/datasheet/2/281/1/muro_s_a0000194430_1-2279287.pdf",
  "pages": "8"
},
{
  "_id": {
    "$oid": "67fe49b59a2431d66f0bee72"
  },
  "name": "IAM-20380",
  "manufacturer": "TDK",
  "type": "Sensor, Motion, Gyroscope",
  "pins": [
    {
      "number": "1",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage"
    },
    {
      "number": "2",
      "name": "SCL\nSPC",
      "description": "I2C serial clock (SCL)\nSPI serial clock (SPC)"
    },
    {
      "number": "3",
      "name": "SDA\nSDI",
      "description": "I2C serial data (SDA)\nSPI serial data input (SDI)"
    },
    {
      "number": "4",
      "name": "SA0\nSDO",
      "description": "I2C slave address LSB (SA0)\nSPI serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "CS",
      "description": "Chip select (0 = SPI mode; 1 = I2C mode)"
    },
    {
      "number": "6",
      "name": "INT",
      "description": "Interrupt digital output (totem pole or open-drain)"
    },
    {
      "number": "7",
      "name": "RESV",
      "description": "Reserved. Do not connect."
    },
    {
      "number": "8",
      "name": "FSYNC",
      "description": "Synchronization digital input (optional). Connect to GND if unused."
    },
    {
      "number": "9",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "10",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "11",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "12",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "13",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "14",
      "name": "REGOUT",
      "description": "Regulator filter capacitor connection"
    },
    {
      "number": "15",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "16",
      "name": "VDD",
      "description": "Power Supply"
    }
  ],
  "version": "1.0",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/gyro/data_sheet/ds-000195-iam-20380_v1.0-typ.pdf",
  "pages": "16"
},
{
  "_id": {
    "$oid": "67fe4ae09a2431d66f0bee73"
  },
  "name": "IDG-2030U",
  "manufacturer": "TDK",
  "type": "Sensor, Motion, Gyroscope",
  "pins": [
    {
      "number": "1",
      "name": "INT",
      "description": "Interrupt Digital Output (Totem pole or open-drain)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI Chip Select (0=SPI mode, 1= I2C mode)"
    },
    {
      "number": "3",
      "name": "FSYNC",
      "description": "Frame Synchronization Digital Input. Connect to GND if not used."
    },
    {
      "number": "4",
      "name": "AD0\nSDO",
      "description": "2C Slave Address LSB (AD0)\nSPI Serial Data Output (SDO)"
    },
    {
      "number": "5",
      "name": "SDA\nSDI",
      "description": "I2C Serial Data (SDA)\nSPI Serial Data Input (SDI)"
    },
    {
      "number": "6",
      "name": "SCL\nSCLK",
      "description": "I2C Serial Clock (SCL)\nSPI Serial Clock (SCLK)"
    },
    {
      "number": "7",
      "name": "REGOUT",
      "description": "Regulator Output. Internal use only, bypass to GND with a 0.1μF cap."
    },
    {
      "number": "8",
      "name": "RESV-G",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Analog and Digital I/O Power Supply. Bypass to GND with a 0.1μF cap."
    },
    {
      "number": "10",
      "name": "NC",
      "description": " Not Internally Connected. May be used for PCB trace routing."
    },
    {
      "number": "11",
      "name": "GND",
      "description": "Power Supply Ground"
    },
    {
      "number": "12",
      "name": "NC",
      "description": "Not Internally Connected. May be used for PCB trace routing."
    }
  ],
  "version": "1.0",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/gyro/data_sheet/ds-000130-idg-2030u-v1.0.pdf",
  "pages": "3"
},
{
  "_id": {
    "$oid": "67fe4c959a2431d66f0bee74"
  },
  "name": "ASM330LHBG1",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, IMU",
  "pins": [
    {
      "number": "1",
      "name": "SDO\nSA0\nSA0",
      "description": "SPI 4-wire interface serial data output (SDO)\nI2C least significant bit of the device address (SA0)\nMIPI I3C least significant bit of the static address (SA0)"
    },
    {
      "number": "2",
      "name": "RES",
      "description": "Connect to Vdd_IO or GND"
    },
    {
      "number": "3",
      "name": "RES",
      "description": "Connect to Vdd_IO or GND"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt in I2C and SPI"
    },
    {
      "number": "5",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "NC",
      "description": "Connect to Vdd_IO or GND or leave unconnected"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Programmable interrupt 2 (INT2) / data enabled (DEN)"
    },
    {
      "number": "10",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/MIPI I3C/SPI mode selection\n(1: SPI idle mode / I2C/MIPI I3C communication enabled;\n0: SPI communication mode / I2C/MIPI I3C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C/MIPI I3C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C/MIPI I3C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    }
  ],
  "version": "Rev 1",
  "url": "https://www.st.com/resource/en/datasheet/asm330lhbg1.pdf",
  "pages": "8"
},
{
  "_id": {
    "$oid": "67fe4d849a2431d66f0bee75"
  },
  "name": "ASM330LHB",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, IMU",
  "pins": [
    {
      "number": "1",
      "name": "SDO\nSA0\nSA0",
      "description": "SPI 4-wire interface serial data output (SDO)\nI2C least significant bit of the device address (SA0)\nMIPI I3C least significant bit of the static address (SA0)"
    },
    {
      "number": "2",
      "name": "RES",
      "description": "Connect to Vdd_IO or GND"
    },
    {
      "number": "3",
      "name": "RES",
      "description": "Connect to Vdd_IO or GND"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt in I2C and SPI"
    },
    {
      "number": "5",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "NC",
      "description": "Connect to Vdd_IO or GND or leave unconnected"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "Vdd",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Programmable interrupt 2 (INT2) / data enabled (DEN)"
    },
    {
      "number": "10",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/MIPI I3C/SPI mode selection\n(1: SPI idle mode / I2C/MIPI I3C communication enabled;\n0: SPI communication mode / I2C/MIPI I3C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C/MIPI I3C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C/MIPI I3C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    }
  ],
  "version": "Rev 9",
  "url": "https://www.st.com/resource/en/datasheet/asm330lhb.pdf",
  "pages": "8"
},
{
  "_id": {
    "$oid": "67fe4f219a2431d66f0bee76"
  },
  "name": "ICM-42688-V",
  "manufacturer": "TDK",
  "type": "Sensor, Motion, IMU",
  "pins": [
    {
      "number": "1",
      "name": "AP_SDO\nAP_AD0",
      "description": "AP_SDO: AP SPI serial data output (4-wire mode);\nAP_AD0: AP I3CSM / I2C slave address LSB"
    },
    {
      "number": "2",
      "name": "RESV",
      "description": "No Connect or Connect to GND"
    },
    {
      "number": "3",
      "name": "RESV",
      "description": "No Connect or Connect to GND"
    },
    {
      "number": "4",
      "name": "INT1\nINT",
      "description": "INT1: Interrupt 1 (Note: INT1 can be push-pull or open drain)\nINT: All interrupts mapped to pin 4"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "IO power supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Power supply ground"
    },
    {
      "number": "7",
      "name": "RESV",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply voltage"
    },
    {
      "number": "9",
      "name": "INT2\nFSYNC\nCLKIN",
      "description": "INT2: Interrupt 2 (Note: INT2 can be push-pull or open drain)\nFSYNC: Frame sync input; Connect to GND if FSYNC not used\nCLKIN: External clock input"
    },
    {
      "number": "10",
      "name": "RESV",
      "description": "No Connect or Connect to GND"
    },
    {
      "number": "11",
      "name": "RESV",
      "description": "No Connect or Connect to GND"
    },
    {
      "number": "12",
      "name": "AP_CS ",
      "description": "AP SPI Chip select (AP SPI interface); Connect to VDDIO if using AP I3CSM / I2C interface"
    },
    {
      "number": "13",
      "name": "AP_SCL\nAP_SCLK",
      "description": "AP_SCL: AP I3CSM I2C serial clock; \nAP_SCLK: AP SPI serial clock"
    },
    {
      "number": "14",
      "name": "AP_SDA\nAP_SDIO\nAP_SDI",
      "description": "AP_SDA: AP I3CSM / I2C serial data;\nAP_SDIO: AP SPI serial data I/O (3-wire mode);\nAP_SDI: AP SPI serial data input (4-wire mode)"
    }
  ],
  "version": "1.1",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/imu/data_sheet/ds-000439-icm-42688-v.pdf",
  "pages": "20"
},
{
  "_id": {
    "$oid": "67fe501d9a2431d66f0bee77"
  },
  "name": "ICM-40627",
  "manufacturer": "TDK",
  "type": "Sensor, Motion, IMU",
  "pins": [
    {
      "number": "1",
      "name": "AP_SDO\nAP_AD0",
      "description": "AP_SDO: AP SPI serial data output (4-wire mode);\nAP_AD0: AP I2C slave address LSB"
    },
    {
      "number": "2",
      "name": "RESV",
      "description": "No Connect or Connect to GND"
    },
    {
      "number": "3",
      "name": "RESV",
      "description": "No Connect or Connect to GND"
    },
    {
      "number": "4",
      "name": "INT1\nINT",
      "description": "INT1: Interrupt 1 (Note: INT1 can be push-pull or open drain)\nINT: All interrupts mapped to pin 4"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "IO power supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Power supply ground"
    },
    {
      "number": "7",
      "name": "RESV",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply voltage "
    },
    {
      "number": "9",
      "name": "INT2\nFSYNC",
      "description": "INT2: Interrupt 2 (Note: INT2 can be push-pull or open drain)\nFSYNC: Frame sync input; Connect to GND if FSYNC not used"
    },
    {
      "number": "10",
      "name": "RESV",
      "description": "No Connect or Connect to GND"
    },
    {
      "number": "11",
      "name": "RESV",
      "description": "No Connect or Connect to GND"
    },
    {
      "number": "12",
      "name": "AP_CS",
      "description": "AP SPI Chip select (AP SPI interface); Connect to VDDIO if using AP I2C interface"
    },
    {
      "number": "13",
      "name": "AP_SCL\nAP_SCLK",
      "description": "AP_SCL: AP I2C serial clock\nAP_SCLK: AP SPI serial clock"
    },
    {
      "number": "14",
      "name": "AP_SDA\nAP_SDIO\nAP_SDI",
      "description": "AP_SDA: AP I2C serial data;\nAP_SDIO: AP SPI serial data I/O (3-wire mode);\nAP_SDI: AP SPI serial data input (4-wire mode)"
    }
  ],
  "version": "1.2",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/imu/data_sheet/ds-000381-icm-40627.pdf",
  "pages": "18"
},
{
  "_id": {
    "$oid": "67fe52869a2431d66f0bee78"
  },
  "name": "BHI360",
  "manufacturer": "Bosch Sensortec",
  "type": "Sensor, Motion, IMU",
  "pins": [
    {
      "number": "1",
      "name": "HSDO",
      "description": "Host Interface:\nSPI mode: MISO\nI2C mode: address select"
    },
    {
      "number": "2",
      "name": "ASDX",
      "description": "Sensor Aux Interface:\nOIS mode: MOS\nI2C mode: SDA\nMaster 2: SPO MOSI / I2C SDA"
    },
    {
      "number": "3",
      "name": "ASCX",
      "description": "Sensor Aux Interface:\nOIS mode: MOS\nI2C mode: SDA\nMaster 2: SPI MOSI / I2C SDA"
    },
    {
      "number": "4",
      "name": "HIRQ",
      "description": "Host Interrupt Signal (Output)"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Digital IO and Fuser2 Supply"
    },
    {
      "number": "6",
      "name": "GNDIO",
      "description": "Digital IO and Fuser2 Ground"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Analog Sensor Ground"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Analog Sensor Supply"
    },
    {
      "number": "9",
      "name": "VREG",
      "description": "Voltage regulator output"
    },
    {
      "number": "10",
      "name": "OCSB",
      "description": "Sensor Aux Interface:\nOIS mode: Chip Select\nI2C mode: unused\nMaster 2: SPI Chip Select 1"
    },
    {
      "number": "11",
      "name": "OSDO",
      "description": "Sensor Aux Interface:\nOIS mode: MISO\nI2C mode: unused\nMaster 2: SPI MISO / I2C unused"
    },
    {
      "number": "12",
      "name": "HCSB",
      "description": "Host Interface:\nSPI mode: Chip Select\nI2C: Switch to SPI mode* (to work in I2C mode, this line should be maintained as High)"
    },
    {
      "number": "13",
      "name": "HSCX",
      "description": "Host Interface: SPI SCK / I2C SCL"
    },
    {
      "number": "14",
      "name": "HSDX",
      "description": "Host Interface Serial Data SPI MOSI / I2C SDA"
    },
    {
      "number": "15",
      "name": "M3SCL",
      "description": "Master 3 I2C SCL (I2C Serial Clock), Fuser2 Debug Clock (JTAG_CLK)"
    },
    {
      "number": "16",
      "name": "JTAG_DIO",
      "description": "Fuser2 Debug Data (JTAG_DIO)"
    },
    {
      "number": "17",
      "name": "RESETN",
      "description": "Reset input, active low"
    },
    {
      "number": "18",
      "name": "M3SDA",
      "description": "Master 3: I2C SDA (I2C Serial Data)"
    },
    {
      "number": "19",
      "name": "RESV2",
      "description": "Reserved: do not connect (internal IMU interrupt)"
    },
    {
      "number": "20",
      "name": "RESV1",
      "description": "Reserved: do not connect (internal IMU interrupt)"
    }
  ],
  "version": "1.0",
  "url": "https://eu.mouser.com/datasheet/2/783/bst_bhi360_ds000-3388304.pdf",
  "pages": "18",
  "flag": null
},
{
  "_id": {
    "$oid": "67fe57e59a2431d66f0bee79"
  },
  "name": "BMI270",
  "manufacturer": "Bosch Sensortec",
  "type": "Sensor, Motion, IMU",
  "pins": [
    {
      "number": "1",
      "name": "SDO",
      "description": "SDO Serial data output in SPI 4W\nI2C Address bit-0 select in I2C mode"
    },
    {
      "number": "2",
      "name": "ASDx",
      "description": "Aux interface / OIS interface"
    },
    {
      "number": "3",
      "name": "ASCx",
      "description": "Aux interface / OIS interface"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Interrupt pin 1"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage (1.2 ... 3.6V)"
    },
    {
      "number": "6",
      "name": "GNDIO",
      "description": "Ground for I/O"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground for digital & analog"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply analog & digital domain (1.71V - 3.6V)"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Interrupt pin 2"
    },
    {
      "number": "10",
      "name": "OCSB",
      "description": "OIS interface"
    },
    {
      "number": "11",
      "name": "OSDO",
      "description": "OIS interface"
    },
    {
      "number": "12",
      "name": "CSB",
      "description": "Chip select for SPI mode"
    },
    {
      "number": "13",
      "name": "SCK\nSCL",
      "description": "SCK for SPI serial clock\nSCL for I2C serial clock"
    },
    {
      "number": "14",
      "name": "SDA\nSDI\nSDA",
      "description": "SDA serial data I/O in I2C\nSDI serial data input in SPI 4W\nSDA serial data I/O in SPI 3W"
    }
  ],
  "version": "1.4",
  "url": "https://eu.mouser.com/datasheet/2/783/bst_bmi270_ds000-2529306.pdf",
  "pages": "135",
  "flag": null
},
{
  "_id": {
    "$oid": "67fe594e9a2431d66f0bee7a"
  },
  "name": "MTi 600-series",
  "manufacturer": "Movella",
  "type": "Sensor, Motion, IMU",
  "pins": [
    {
      "number": "1",
      "name": "VIN",
      "description": "Power input"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "CAN_H",
      "description": "CAN bus differential high side"
    },
    {
      "number": "4",
      "name": "CAN_L",
      "description": "CAN bus differential low side"
    },
    {
      "number": "5",
      "name": "RS232_TxD",
      "description": "RS232 transmitter output to host"
    },
    {
      "number": "6",
      "name": "RS232_RTS",
      "description": "RS232 Ready To Send output to host"
    },
    {
      "number": "7",
      "name": "RS232_RxD",
      "description": "RS232 receiver input from host"
    },
    {
      "number": "8",
      "name": "RS232_CTS",
      "description": "RS232 Clear To Send input from host"
    },
    {
      "number": "9",
      "name": "SYNC_IN1",
      "description": "Multifunctional synchronization input"
    },
    {
      "number": "10",
      "name": "SYNC_IN2",
      "description": "Multifunctional synchronization input"
    },
    {
      "number": "11",
      "name": "GNSS_TxD",
      "description": "RS232 transmitter output to GNSS module"
    },
    {
      "number": "12",
      "name": "GNSS_RxD",
      "description": "RS232 receiver input from GNSS module"
    },
    {
      "number": "13",
      "name": "SYNC_OUT",
      "description": "Configurable synchronization output"
    },
    {
      "number": "14",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "15",
      "name": "UART_TxD",
      "description": "UART transmitter output"
    },
    {
      "number": "16",
      "name": "UART_RxD",
      "description": "UART receiver input"
    }
  ],
  "version": "2020.B",
  "url": "https://eu.mouser.com/datasheet/2/1484/MTi_600_series_Datasheet-3193436.pdf",
  "pages": "15"
},
{
  "_id": {
    "$oid": "67fe5b729a2431d66f0bee7b"
  },
  "name": "ADIS16575",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, IMU",
  "pins": [
    {
      "number": "1",
      "name": "DR",
      "description": "Data Ready Indicator."
    },
    {
      "number": "2",
      "name": "SYNC",
      "description": "External Sync Input and Output, per MSC_CTRL."
    },
    {
      "number": "3",
      "name": "SCLK",
      "description": "SPI Serial Clock."
    },
    {
      "number": "4",
      "name": "DOUT",
      "description": "SPI Data Output. The DOUT pin clocks the output on the SCLK falling edge."
    },
    {
      "number": "5",
      "name": "DIN",
      "description": "SPI Data Input. The DIN pin clocks the input on the SCLK rising edge."
    },
    {
      "number": "6",
      "name": "CS",
      "description": "SPI Chip Select."
    },
    {
      "number": "7",
      "name": "DNC",
      "description": "Do Not Connect. Do not connect to the DNC pin."
    },
    {
      "number": "8",
      "name": "RST",
      "description": "Reset (Active Low)."
    },
    {
      "number": "9",
      "name": "WM",
      "description": "Watermark Interrupt Signal That Tracks the First In, First Out (FIFO) Level."
    },
    {
      "number": "10",
      "name": "DNC",
      "description": "Do Not Connect. Do not connect to the DNC pin."
    },
    {
      "number": "11",
      "name": "VDD",
      "description": "Power Supply."
    },
    {
      "number": "12",
      "name": "DNC",
      "description": "Do Not Connect. Do not connect to the DNC pin."
    },
    {
      "number": "13",
      "name": "DNC",
      "description": "Power Ground."
    },
    {
      "number": "14",
      "name": "DNC",
      "description": "Do Not Connect. Do not connect to the DNC pin."
    }
  ],
  "version": "Rev. 0",
  "url": "https://eu.mouser.com/datasheet/2/609/1/adis16575_16576_16577-3535098.pdf",
  "pages": "10"
},
{
  "_id": {
    "$oid": "67fe5cff9a2431d66f0bee7c"
  },
  "name": "ADIS16365",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, IMU",
  "pins": [
    {
      "number": "1",
      "name": "DIO3",
      "description": "Configurable Digital Input/Output."
    },
    {
      "number": "2",
      "name": "DIO4\nCLKIN",
      "description": "Configurable Digital Input/Output.\nSync Clock Input."
    },
    {
      "number": "3",
      "name": "SCLK",
      "description": "SPI Serial Clock."
    },
    {
      "number": "4",
      "name": "DOUT",
      "description": "SPI Data Output. Clocks output on SCLK falling edge."
    },
    {
      "number": "5",
      "name": "DIN",
      "description": "SPI Data Output. Clocks output on SCLK falling edge."
    },
    {
      "number": "6",
      "name": "CS",
      "description": "SPI Chip Select."
    },
    {
      "number": "7",
      "name": "DIO1",
      "description": "Configurable Digital Input/Output."
    },
    {
      "number": "8",
      "name": "RST",
      "description": "Reset"
    },
    {
      "number": "9",
      "name": "DIO2",
      "description": "Configurable Digital Input/Output."
    },
    {
      "number": "10",
      "name": "VCC",
      "description": "Power Supply."
    },
    {
      "number": "11",
      "name": "VCC",
      "description": "Power Supply."
    },
    {
      "number": "12",
      "name": "VCC",
      "description": "Power Supply."
    },
    {
      "number": "13",
      "name": "GND",
      "description": "Power Ground."
    },
    {
      "number": "14",
      "name": "GND",
      "description": "Power Ground."
    },
    {
      "number": "15",
      "name": "GND",
      "description": "Power Ground."
    },
    {
      "number": "16",
      "name": "DNC",
      "description": "Do Not Connect."
    },
    {
      "number": "17",
      "name": "DNC",
      "description": "Do Not Connect."
    },
    {
      "number": "18",
      "name": "DNC",
      "description": "Do Not Connect."
    },
    {
      "number": "19",
      "name": "DNC",
      "description": "Do Not Connect."
    },
    {
      "number": "20",
      "name": "AUX_DAC",
      "description": "Auxiliary, 12-Bit DAC Output."
    },
    {
      "number": "21",
      "name": "AUX_ADC",
      "description": "Auxiliary, 12-Bit ADC Input."
    },
    {
      "number": "22",
      "name": "DNC",
      "description": "Do Not Connect."
    },
    {
      "number": "23",
      "name": "DNC",
      "description": "Do Not Connect."
    },
    {
      "number": "24",
      "name": "DNC",
      "description": "Do Not Connect."
    }
  ],
  "version": "Rev. F",
  "url": "https://eu.mouser.com/datasheet/2/609/ADIS16365-3120580.pdf",
  "pages": "8"
},
{
  "_id": {
    "$oid": "67fe62ab9a2431d66f0bee7d"
  },
  "name": "VL53L7CX",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Distance Sensor",
  "pins": [
    {
      "number": "A1",
      "name": "I2C_RST",
      "description": "I2C interface reset pin, active high. Toggle this pin from 0 to 1, then back to 0 to reset the I2C slave. Connect to GND via 47 kΩ resistor."
    },
    {
      "number": "A2",
      "name": "RSVD4",
      "description": "Connect to ground"
    },
    {
      "number": "A3",
      "name": "INT",
      "description": "Interrupt output, defaults to opendrain output (tristate), 47 kΩ pullup resistor to IOVDD required"
    },
    {
      "number": "A4",
      "name": "IOVDD",
      "description": "1.8 V, 2.8 V or 3.3 V supply for digital core and I/O supply"
    },
    {
      "number": "A5",
      "name": "LPn",
      "description": "Comms enable. Drive this pin to logic 0 to disable the I2C comms when the device is in LP mode. Drive this pin to logic 1 to enable I2C comms in LP mode. Typically used when it is required to change the I2C adress in multidevice systems. A 47 kΩ pullup resistor to IOVDD is required."
    },
    {
      "number": "A6",
      "name": "RSVD1",
      "description": "Connect to ground"
    },
    {
      "number": "A7",
      "name": "RSVD2",
      "description": "Connect to ground"
    },
    {
      "number": "B1",
      "name": "AVDD",
      "description": "2.8 V or 3.3 V analog and VCSEL supply"
    },
    {
      "number": "B4",
      "name": "THERMALPAD",
      "description": "Connect to a ground plane to allow good thermal conduction"
    },
    {
      "number": "B7",
      "name": "AVDD",
      "description": "2.8 V or 3.3 V analog and VCSEL supply"
    },
    {
      "number": "C1",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "C2",
      "name": "RSVD6",
      "description": "General purpose I/O, defaults to opendrain output (tristate), 47 kΩ pullup resistor to IOVDD required"
    },
    {
      "number": "C3",
      "name": "SDA",
      "description": "Data (bidirectional), 2.2 kΩ pullup resistor to IOVDD required"
    },
    {
      "number": "C4",
      "name": "SCL",
      "description": "Clock (input), 2.2 kΩ pullup resistor to IOVDD required"
    },
    {
      "number": "C5",
      "name": "RSVD5",
      "description": "Do not connect"
    },
    {
      "number": "C6",
      "name": "RSVD3",
      "description": "Connect to ground"
    },
    {
      "number": "C7",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "Rev 4",
  "url": "https://eu.mouser.com/datasheet/2/389/vl53l7cx-3074793.pdf",
  "pages": "6"
},
{
  "_id": {
    "$oid": "67fe64e39a2431d66f0bee7e"
  },
  "name": "OPT3101",
  "manufacturer": "Texas Instruments",
  "type": "Sensor, Motion, Distance Sensor",
  "pins": [
    {
      "number": "1",
      "name": "A1",
      "description": "I2C slave LSB1 address bit"
    },
    {
      "number": "2",
      "name": "A2",
      "description": "I2C slave LSB2 address bit"
    },
    {
      "number": "3",
      "name": "IOVSS",
      "description": "Ground for digital and I/O"
    },
    {
      "number": "4",
      "name": "TX2",
      "description": "Illumination driver output. Connect to LED cathode. Anode should be connected to a supply."
    },
    {
      "number": "5",
      "name": "TX1",
      "description": "Illumination driver output. Connect to LED cathode. Anode should be connected to a supply."
    },
    {
      "number": "6",
      "name": "VSSL",
      "description": "Illumination driver ground."
    },
    {
      "number": "7",
      "name": "TX0",
      "description": "Illumination driver output. Connect to LED cathode. Anode should be connected to a supply."
    },
    {
      "number": "8",
      "name": "IOVSS",
      "description": "Ground for digital and I/O"
    },
    {
      "number": "9",
      "name": "IOVDD",
      "description": "Supply for I/O and illumination driver"
    },
    {
      "number": "10",
      "name": "IOVDD",
      "description": "Supply for I/O and illumination driver"
    },
    {
      "number": "11",
      "name": "GP1",
      "description": "General-purpose output"
    },
    {
      "number": "12",
      "name": "GP2",
      "description": "General-purpose output, CLKREF input"
    },
    {
      "number": "13",
      "name": "SCL_S",
      "description": "I2C slave clock. Connect with a 10-kΩ resistor to a 3.3-V supply."
    },
    {
      "number": "14",
      "name": "SDA_S",
      "description": "I2C slave data. Connect with a 10-kΩ resistor to a 3.3-V supply."
    },
    {
      "number": "15",
      "name": "SCL_M",
      "description": "I2C master clock. Connect with a 10-kΩ resistor to a 3.3-V supply."
    },
    {
      "number": "16",
      "name": "SDA_M",
      "description": "I2C master data. Connect with a 10-kΩ resistor to a 3.3-V supply."
    },
    {
      "number": "17",
      "name": "RST_MS",
      "description": "Active-low global reset, monoshot trigger. There is no internal pullup on this pin. Connect this pin to the host controller or add a pullup resistor."
    },
    {
      "number": "18",
      "name": "REG_MODE",
      "description": "Mode to select internal regulator for 1.8-V supplies (AVDD, DVDD)"
    },
    {
      "number": "19",
      "name": "DVDD",
      "description": "1.8-V digital supply"
    },
    {
      "number": "20",
      "name": "AVDD3",
      "description": "3.3-V analog supply"
    },
    {
      "number": "21",
      "name": "AVDD",
      "description": "1.8-V analog supply"
    },
    {
      "number": "22",
      "name": "NC",
      "description": "No internal connection"
    },
    {
      "number": "23",
      "name": "AVSS",
      "description": "Analog ground"
    },
    {
      "number": "24",
      "name": "INM",
      "description": "AFE negative input. Connect photodiode equivalent capacitance. Connect the other end of the capacitor to ground AVSS."
    },
    {
      "number": "25",
      "name": "INP",
      "description": "AFE positive input. Connect photodiode cathode. Connect the Anode of the photodiode to ground AVSS."
    },
    {
      "number": "26",
      "name": "AVSS",
      "description": "Analog ground"
    },
    {
      "number": "27",
      "name": "AVSS",
      "description": "Analog ground"
    },
    {
      "number": "28",
      "name": "A0",
      "description": "I2C slave LSB0 address bit"
    }
  ],
  "version": "June 2018",
  "url": "https://www.ti.com/lit/ds/symlink/opt3101.pdf?ts=1744689146959&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FOPT3101",
  "pages": "3-4"
},
{
  "_id": {
    "$oid": "67fe69599a2431d66f0bee7f"
  },
  "name": "CH201",
  "manufacturer": "TDK",
  "type": "Sensor, Motion, Distance Sensor",
  "pins": [
    {
      "number": "1",
      "name": "INT",
      "description": "Interrupt output. Can be switched to input for triggering and calibration functions"
    },
    {
      "number": "2",
      "name": "SCL",
      "description": "SCL Input. I2C clock input. This pin must be pulled up externally."
    },
    {
      "number": "3",
      "name": "SDA",
      "description": "SDA Input/Output. I2C data I/O. This pin must be pulled up externally."
    },
    {
      "number": "4",
      "name": "PROG",
      "description": "Program Enable. Cannot be floating."
    },
    {
      "number": "5",
      "name": "VSS",
      "description": "Power return."
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Digital Logic Supply. Connect to externally regulated 1.8V supply. Suggest common connection to AVDD. If not connected locally to AVDD, bypass with a 0.1μF capacitor as close as possible to VDD I/O pad."
    },
    {
      "number": "7",
      "name": "AVDD",
      "description": "Analog Power Supply. Connect to externally regulated supply. Bypass with a 0.1μF capacitor as close as possible to AVDD I/O pad."
    },
    {
      "number": "8",
      "name": "RESET_N",
      "description": "Active-low reset. Cannot be floating."
    }
  ],
  "version": "1.1",
  "url": "https://www.mouser.com/catalog/specsheets/TDK_10012020_DS-000379-CH201-v1.1.pdf?_gl=1*1z0pzlx*_gcl_au*MTYyMDE4MzAyMy4xNzQ0MTE2ODA5*_ga*NDQ4NTkwODM3LjE3NDQxMTY4MzM.*_ga_15W4STQT4T*MTc0NDcxNzk2NC44LjEuMTc0NDcyNjA1Ni42LjAuMA..",
  "pages": "4"
},
{
  "_id": {
    "$oid": "67fe6a069a2431d66f0bee80"
  },
  "name": "ICU-10201",
  "manufacturer": "TDK",
  "type": "Sensor, Motion, Distance Sensor",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "2",
      "name": "SCLK",
      "description": "SPI Interface Clock (from external SPI host) CPOL=1, CPHA=1"
    },
    {
      "number": "3",
      "name": "MOSI",
      "description": "MCU Out Sensor In serial data (from external SPI host)"
    },
    {
      "number": "4",
      "name": "MISO",
      "description": "MCU In Sensor Out serial data (to external SPI host)"
    },
    {
      "number": "5",
      "name": "CS_B",
      "description": "SPI Chip Select (active-low, from external SPI host)"
    },
    {
      "number": "6",
      "name": "INT1",
      "description": "Interrupt Request Open Drain Input/Output 1"
    },
    {
      "number": "7",
      "name": "INT2",
      "description": "Interrupt Request Open Drain Input/Output 2"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "9",
      "name": "LFCLK",
      "description": "External Input/Output Low Frequency Reference Clock - 32.768 kHz typical (optional)"
    },
    {
      "number": "10",
      "name": "MUTCLK",
      "description": "External Input/Output 16x Operating Frequency Reference Clock (optional)"
    },
    {
      "number": "11",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "12",
      "name": "VDD",
      "description": "Digital Logic Supply. Connect to externally regulated 1.8 V +/-5% supply. Suggest common connection to AVDD. If not connected locally to AVDD, bypass with a 0.1 μF capacitor close to VDD & GND pad."
    },
    {
      "number": "13",
      "name": "AVDD",
      "description": "Analog Power Supply. Connect to externally regulated 1.8 V +/-5% supply. Bypass with a 0.1 μF capacitor close to AVDD & GND pad."
    },
    {
      "number": "14",
      "name": "VDDIO",
      "description": "I/O Power Supply. Connect to externally regulated 1.8 V +/-5% or 3.3 V +/- 10% supply. Bypass with a 1μF capacitor close to VDDIO & GND pad."
    }
  ],
  "version": "1.4",
  "url": "https://www.mouser.com/catalog/specsheets/TDK_ds-000480_icu-10201-datasheet.pdf?_gl=1*r6joil*_gcl_au*MTYyMDE4MzAyMy4xNzQ0MTE2ODA5*_ga*NDQ4NTkwODM3LjE3NDQxMTY4MzM.*_ga_15W4STQT4T*MTc0NDcxNzk2NC44LjEuMTc0NDcyNjA1OC40LjAuMA..",
  "pages": "3"
},
{
  "_id": {
    "$oid": "67fe6b969a2431d66f0bee81"
  },
  "name": "SCL3400-D01",
  "manufacturer": "Murata",
  "type": "Sensor, Motion, Inclinometer",
  "pins": [
    {
      "number": "1",
      "name": "AVSS",
      "description": "Analog Reference Ground, connect externally to GND"
    },
    {
      "number": "2",
      "name": "A_EXTC",
      "description": "External capacitor connection for analog core"
    },
    {
      "number": "3",
      "name": "RESERVED",
      "description": "Factory use only, connect externally to GND"
    },
    {
      "number": "4",
      "name": "VDD",
      "description": "Analog Supply Voltage"
    },
    {
      "number": "5",
      "name": "CSB",
      "description": "Chip Select of SPI Interface, 3.3V logic compatible Schmitt-trigger input"
    },
    {
      "number": "6",
      "name": "MISO",
      "description": "Data Out of SPI Interface"
    },
    {
      "number": "7",
      "name": "MOSI",
      "description": "Data In of SPI Interface, 3.3V logic compatible Schmitt-trigger input"
    },
    {
      "number": "8",
      "name": "SCK",
      "description": "CLK Signal of SPI Interface, 3.3V logic compatible Schmitt-trigger input"
    },
    {
      "number": "9",
      "name": "DVIO",
      "description": "SPI Interface Supply Voltage. Must never be higher than VDD"
    },
    {
      "number": "10",
      "name": "D_EXTC",
      "description": "External capacitor connection for digital core"
    },
    {
      "number": "11",
      "name": "DVSS",
      "description": "Digital Reference Ground, connect externally to GND. Must never be left floating when component is powered."
    },
    {
      "number": "12",
      "name": "EMC_GND",
      "description": "EMC Ground, connect externally to GND"
    }
  ],
  "version": "Rev. 3",
  "url": "https://eu.mouser.com/datasheet/2/281/1/Murata_11_15_2022_Data_sheet_Murata_SCL3400_D01-3074392.pdf",
  "pages": "7"
},
{
  "_id": {
    "$oid": "67fe6d669a2431d66f0bee82"
  },
  "name": "SCA830-D07",
  "manufacturer": "Murata",
  "type": "Sensor, Motion, Inclinometer",
  "pins": [
    {
      "number": "1",
      "name": "Reserved",
      "description": "Not used"
    },
    {
      "number": "2",
      "name": "Reserved",
      "description": "Factory use"
    },
    {
      "number": "3",
      "name": "AVSS",
      "description": "Negative power supply (analog)"
    },
    {
      "number": "4",
      "name": "AVDD",
      "description": "Positive power supply (analog)"
    },
    {
      "number": "5",
      "name": "CSB",
      "description": "Chip select"
    },
    {
      "number": "6",
      "name": "MISO",
      "description": "Data output"
    },
    {
      "number": "7",
      "name": "SCK",
      "description": "Serial clock"
    },
    {
      "number": "8",
      "name": "MOSI",
      "description": "Data input"
    },
    {
      "number": "9",
      "name": "Reserved",
      "description": "Pulse width modulation output"
    },
    {
      "number": "10",
      "name": "DVDD",
      "description": "Positive power supply (digital)"
    },
    {
      "number": "11",
      "name": "DVSS",
      "description": "Negative power supply (digital)"
    },
    {
      "number": "12",
      "name": "EGnd",
      "description": "EMC ground"
    }
  ],
  "version": "Rev. 3",
  "url": "https://eu.mouser.com/datasheet/2/281/1/datasheet_sca830_d07-3011332.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "6800f4149a2431d66f0bee83"
  },
  "name": "ADIS16209",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Motion, Inclinometer",
  "pins": [
    {
      "number": "1",
      "name": "SCLK",
      "description": "SPI, Serial Clock."
    },
    {
      "number": "2",
      "name": "DOUT",
      "description": "SPI, Data Output."
    },
    {
      "number": "3",
      "name": "DIN",
      "description": "SPI, Data Input."
    },
    {
      "number": "4",
      "name": "CS",
      "description": "SPI, Chip Select."
    },
    {
      "number": "5",
      "name": "DIO1",
      "description": "Digital Input/Output Pins."
    },
    {
      "number": "6",
      "name": "DIO2",
      "description": "Digital Input/Output Pins."
    },
    {
      "number": "7",
      "name": "DNC",
      "description": "Do not connect to this pin."
    },
    {
      "number": "8",
      "name": "DNC",
      "description": "Do not connect to this pin."
    },
    {
      "number": "9",
      "name": "RST",
      "description": "Reset, Active Low."
    },
    {
      "number": "10",
      "name": "DNC",
      "description": "Do not connect to this pin."
    },
    {
      "number": "11",
      "name": "DNC",
      "description": "Do not connect to this pin."
    },
    {
      "number": "12",
      "name": "AUX DAC",
      "description": "Auxiliary DAC Output."
    },
    {
      "number": "13",
      "name": "VDD",
      "description": "Power Supply, 3.3 V."
    },
    {
      "number": "14",
      "name": "AUX ADC",
      "description": "Auxiliary ADC Input."
    },
    {
      "number": "15",
      "name": "VREF",
      "description": "Precision Reference."
    },
    {
      "number": "16",
      "name": "GND",
      "description": "Ground."
    }
  ],
  "version": "Rev. H",
  "url": "https://eu.mouser.com/datasheet/2/609/ADIS16209-3120579.pdf",
  "pages": "8"
},
{
  "_id": {
    "$oid": "6800f5e69a2431d66f0bee85"
  },
  "name": "IIS2ICLX",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Motion, Inclinometer",
  "pins": [
    {
      "number": "1",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins (recommended 100 nF filter capacitor)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "I2C/SPI mode selection\n(1: SPI idle mode / I2C communication enabled;\n0: SPI communication mode / I2C disabled and reset)"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "4",
      "name": "INT2",
      "description": "Programmable interrupt 2 (INT2) / Data enable (DEN)\nProgrammable interrupt 2 (INT2) / Data enable (DEN)/I²C master external synchronization signal (MDRDY)"
    },
    {
      "number": "5",
      "name": "SDO\nSA0",
      "description": "SPI 4-wire serial data output (SDO)\nI2C least significant bit of the device address (SA0)"
    },
    {
      "number": "6",
      "name": "INT1",
      "description": "Programmable Interrupt 1 (INT1)"
    },
    {
      "number": "7",
      "name": "SDx",
      "description": "Connect to GND or VDD_IO \nI2C serial data master (MSDA)"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply (recommended 100 nF filter capacitor)"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply (recommended 100 nF filter capacitor)"
    },
    {
      "number": "10",
      "name": "SCL",
      "description": "I2C serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "11",
      "name": "SDA/SDI",
      "description": "I2C serial data (SDA)\nSPI serial data input (SDI)\n3-wire interface serial data output (SDO)"
    },
    {
      "number": "12",
      "name": "SCx",
      "description": "Connect to GND or VDD_IO\nI2C serial clock master (MSCL)"
    },
    {
      "number": "13",
      "name": "GND",
      "description": "GND"
    },
    {
      "number": "14",
      "name": "NC",
      "description": "Connect to GND or leave unconnected"
    },
    {
      "number": "14",
      "name": "NC",
      "description": "Connect to GND or leave unconnected"
    },
    {
      "number": "15",
      "name": "NC",
      "description": "Connect to GND or leave unconnected"
    },
    {
      "number": "16",
      "name": "NC",
      "description": "Connect to GND or leave unconnected"
    }
  ],
  "version": "Rev 5",
  "url": "https://eu.mouser.com/datasheet/2/389/iis2iclx-1877336.pdf",
  "pages": "8"
},
{
  "_id": {
    "$oid": "6800f73c9a2431d66f0bee86"
  },
  "name": "MPX2010DP",
  "manufacturer": "NXP",
  "type": "Sensor, Pressure",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "2",
      "name": "+VOUT",
      "description": "+ Voltage output"
    },
    {
      "number": "3",
      "name": "VS",
      "description": "Power supply"
    },
    {
      "number": "4",
      "name": "-VOUT",
      "description": "– Voltage output"
    }
  ],
  "version": "Rev. 14",
  "url": "https://eu.mouser.com/datasheet/2/302/MPX2010-3139306.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "6800f7d19a2431d66f0bee87"
  },
  "name": "MPXA6115A",
  "manufacturer": "NXP",
  "type": "Sensor, Pressure",
  "pins": [
    {
      "number": "1",
      "name": "DNC",
      "description": "Do not connect to external circuitry or ground. Pin 1 is denoted by chamfered corner."
    },
    {
      "number": "2",
      "name": "VS",
      "description": "Voltage supply"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "VOUT",
      "description": "Output voltage"
    },
    {
      "number": "5",
      "name": "DNC",
      "description": "Do not connect to external circuitry or ground."
    },
    {
      "number": "6",
      "name": "DNC",
      "description": "Do not connect to external circuitry or ground."
    },
    {
      "number": "7",
      "name": "DNC",
      "description": "Do not connect to external circuitry or ground."
    },
    {
      "number": "8",
      "name": "DNC",
      "description": "Do not connect to external circuitry or ground."
    }
  ],
  "version": "Rev. 7.3",
  "url": "https://eu.mouser.com/datasheet/2/302/MPXA6115A-3139396.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "6800f9339a2431d66f0bee88"
  },
  "name": "NPA-500B-015D",
  "manufacturer": "Amphenol",
  "type": "Sensor, Pressure",
  "pins": [
    {
      "number": "1",
      "name": "--",
      "description": ""
    },
    {
      "number": "2",
      "name": "--",
      "description": ""
    },
    {
      "number": "3",
      "name": "VN",
      "description": "Sensor Interface Negative Output"
    },
    {
      "number": "4",
      "name": "VSSP",
      "description": "Sensor Interface Ground"
    },
    {
      "number": "5",
      "name": "--",
      "description": ""
    },
    {
      "number": "6",
      "name": "NC",
      "description": "Do Not Connect"
    },
    {
      "number": "7",
      "name": "--",
      "description": ""
    },
    {
      "number": "8",
      "name": "NC",
      "description": "Do Not Connect"
    },
    {
      "number": "9",
      "name": "NC",
      "description": "Do Not Connect"
    },
    {
      "number": "10",
      "name": "--",
      "description": ""
    },
    {
      "number": "11",
      "name": "VP",
      "description": "Sensor Interface Positive Output"
    },
    {
      "number": "12",
      "name": "VDDP",
      "description": "Sensor Interface Positive Excitation"
    },
    {
      "number": "13",
      "name": "--",
      "description": ""
    },
    {
      "number": "14",
      "name": "--",
      "description": ""
    }
  ],
  "version": "02/2018",
  "url": "https://eu.mouser.com/datasheet/2/18/1/AAS_920_477H_NovaSensor_NPA_SurfaceMnt_021718_web_-1315832.pdf",
  "pages": "6"
},
{
  "_id": {
    "$oid": "6800f9dc9a2431d66f0bee89"
  },
  "name": "LPS33K",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Pressure",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "2",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "3",
      "name": "SCL",
      "description": "I2C serial clock"
    },
    {
      "number": "4",
      "name": "SDA",
      "description": "I2C serial data"
    }
  ],
  "version": "Rev 3",
  "url": "https://eu.mouser.com/datasheet/2/389/lps33k-1857848.pdf",
  "pages": "2"
},
{
  "_id": {
    "$oid": "6800fa899a2431d66f0bee8a"
  },
  "name": "ILPS28QSW",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Pressure",
  "pins": [
    {
      "number": "1",
      "name": "SDA",
      "description": "I2C / MIPI I3CSM serial data (SDA)"
    },
    {
      "number": "2",
      "name": "AH1\nQVAR1",
      "description": "Connect to GND if analog input\nQvar sensing is not needed."
    },
    {
      "number": "3",
      "name": "SCL",
      "description": "I2C / MIPI I3CSM serial clock (SCL)"
    },
    {
      "number": "4",
      "name": "AH2\nQVAR2",
      "description": "Connect to GND if analog input\nQvar sensing is not needed."
    },
    {
      "number": "5",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "7",
      "name": "PAD2LID",
      "description": "Pad connection to metal lid"
    }
  ],
  "version": "Rev. 1",
  "url": "https://www.st.com/resource/en/datasheet/ilps28qsw.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "6800fb3a9a2431d66f0bee8b"
  },
  "name": "LPS22DF",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Pressure",
  "pins": [
    {
      "number": "1",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "SCL\nSPC",
      "description": "I2C / MIPI I3CSM serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "3",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "4",
      "name": "SDA\nSDI\nSDI/SDO",
      "description": "I2C / MIPI I3CSM serial data (SDA)\n4-wire SPI serial data input (SDI)\n3-wire serial data input/output (SDI/SDO)"
    },
    {
      "number": "5",
      "name": "SDO\nSA0",
      "description": "4-wire SPI serial data output (SDO)\nI2C least significant bit of the device address (SA0)\nMIPI I3CSM least significant bit of the static address (SA0)"
    },
    {
      "number": "6",
      "name": "CS",
      "description": "Enables SPI\nI2C and MIPI I3CSM / SPI mode selection\n(1: SPI idle mode / I2C and MIPI I3CSM communication enabled;\n0: SPI communication mode / I2C and MIPI I3CSM disabled)"
    },
    {
      "number": "7",
      "name": "INT_DRDY",
      "description": "Interrupt or Data-Ready"
    },
    {
      "number": "8",
      "name": "GND_IO",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "VDD",
      "description": "Power supply"
    }
  ],
  "version": "Rev 1",
  "url": "https://eu.mouser.com/datasheet/2/389/lps22df-2585546.pdf",
  "pages": "3"
},
{
  "_id": {
    "$oid": "6800fc0f9a2431d66f0bee8c"
  },
  "name": "ILPS22QS",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Pressure",
  "pins": [
    {
      "number": "1",
      "name": "Vdd_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "SCL\nSPC",
      "description": "I2C / MIPI I3CSM serial clock (SCL)\nSPI serial port clock (SPC)"
    },
    {
      "number": "3",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "4",
      "name": "SDA\nSDI\nSDO",
      "description": "I2C / MIPI I3CSM serial data (SDA)\n3-wire SPI serial data input (SDI)\n3-wire serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "AH2\nQVAR2",
      "description": "Connect to GND if analog input\nQvar sensing is not needed."
    },
    {
      "number": "6",
      "name": "CS",
      "description": "Enables SPI\nI2C and MIPI I3CSM / SPI mode selection\n(1: SPI idle mode / I2C and MIPI I3CSM communication enabled;\n0: SPI communication mode / I2C and MIPI I3CSM disabled)"
    },
    {
      "number": "7",
      "name": "AH1\nQVAR1",
      "description": "Connect to GND if analog input\nQvar sensing is not needed."
    },
    {
      "number": "8",
      "name": "GND_IO",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "VDD",
      "description": "Power supply"
    }
  ],
  "version": "Rev 2",
  "url": "https://eu.mouser.com/datasheet/2/389/ilps22qs-2887794.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "6800fc869a2431d66f0bee8d"
  },
  "name": "LPS28DFW",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Pressure",
  "pins": [
    {
      "number": "1",
      "name": "SDA",
      "description": "I2C / MIPI I3CSM serial data (SDA)"
    },
    {
      "number": "2",
      "name": "SA0",
      "description": "I2C least significant bit of the device address (SA0)"
    },
    {
      "number": "3",
      "name": "SCL",
      "description": "I2C / MIPI I3CSM serial clock (SCL)"
    },
    {
      "number": "4",
      "name": "INT_DRDY",
      "description": "Interrupt or data-ready (INT_DRDY)"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "7",
      "name": "PAD2LID",
      "description": "Pad connection to metal lid"
    }
  ],
  "version": "Rev 1",
  "url": "https://eu.mouser.com/datasheet/2/389/lps28dfw-2887780.pdf",
  "pages": "3"
},
{
  "_id": {
    "$oid": "6800fd399a2431d66f0bee8e"
  },
  "name": "MS4525DO",
  "manufacturer": "TE Connectivity",
  "type": "Sensor, Pressure",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "2",
      "name": "SUPPLY",
      "description": "Positive Supply Voltage"
    },
    {
      "number": "3",
      "name": "SDA\nMISO",
      "description": "I2C Data\nSPI Data"
    },
    {
      "number": "4",
      "name": "SCL\nSCLK",
      "description": "I2C Clock\nSPI Clock"
    },
    {
      "number": "5",
      "name": "INT\nSS",
      "description": "I2C Interrupt\nSPI Chip Select"
    },
    {
      "number": "6",
      "name": "NC",
      "description": "No Connection"
    },
    {
      "number": "7",
      "name": "NC",
      "description": "No Connection"
    }
  ],
  "version": "07/2023",
  "url": "https://eu.mouser.com/datasheet/2/418/9/ENG_DS_MS4525DO_B11-1130293.pdf",
  "pages": "8"
},
{
  "_id": {
    "$oid": "6800fdec9a2431d66f0bee8f"
  },
  "name": "MS5803-14BA",
  "manufacturer": "TE Connectivity",
  "type": "Sensor, Pressure",
  "pins": [
    {
      "number": "1",
      "name": "SCLK",
      "description": "Serial data clock"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "CSB",
      "description": "Chip Select (active low)"
    },
    {
      "number": "4",
      "name": "NC",
      "description": "-"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Positive supply voltage"
    },
    {
      "number": "6",
      "name": "PS",
      "description": "Communication protocol select SPI / I2C"
    },
    {
      "number": "7",
      "name": "SDI/SDA",
      "description": "Serial data input"
    },
    {
      "number": "8",
      "name": "SDO",
      "description": "Serial data output"
    }
  ],
  "version": "08/2017",
  "url": "https://eu.mouser.com/datasheet/2/418/5/NG_DS_MS5803-14BA_B3-1130132.pdf",
  "pages": "16"
},
{
  "_id": {
    "$oid": "6800feb29a2431d66f0bee90"
  },
  "name": "BMP390",
  "manufacturer": "Bosch Sensortec",
  "type": "Sensor, Pressure",
  "pins": [
    {
      "number": "1",
      "name": "VDDIO",
      "description": "Digital interface supply"
    },
    {
      "number": "2",
      "name": "SCK",
      "description": "Serial clock input"
    },
    {
      "number": "3",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "SDI",
      "description": "Serial data input"
    },
    {
      "number": "5",
      "name": "SDO",
      "description": "Serial data output"
    },
    {
      "number": "6",
      "name": "CSB",
      "description": "Chip Select"
    },
    {
      "number": "7",
      "name": "INT",
      "description": "INT output"
    },
    {
      "number": "8",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "9",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "10",
      "name": "VDD",
      "description": "Analog supply"
    }
  ],
  "version": "1.7",
  "url": "https://eu.mouser.com/datasheet/2/783/bst_bmp390_ds002-2448819.pdf",
  "pages": "46",
  "flag": null
},
{
  "_id": {
    "$oid": "6800ffbc9a2431d66f0bee91"
  },
  "name": "BMP585",
  "manufacturer": "Bosch Sensortec",
  "type": "Sensor, Pressure",
  "pins": [
    {
      "number": "1",
      "name": "SCX",
      "description": "I2C Serial clock\nSPI Serial clock"
    },
    {
      "number": "2",
      "name": "SDX",
      "description": "I2C Serial data\nSPI Serial data input (4-wire)\nSPI Serial data IO (3-wire)"
    },
    {
      "number": "3",
      "name": "SDO",
      "description": "I2C Slave address LSB\nSPI Serial data output (4-wire)"
    },
    {
      "number": "4",
      "name": "VDDIO",
      "description": "Digital interface power supply"
    },
    {
      "number": "5",
      "name": "INT",
      "description": "Interrupt or data ready"
    },
    {
      "number": "6",
      "name": "VSSIO/VSS",
      "description": "Ground"
    },
    {
      "number": "7",
      "name": "CSB",
      "description": "Chip select for SPI (Low Active)"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Analog power supply"
    },
    {
      "number": "9",
      "name": "L/M Pad",
      "description": "Lasermarking"
    }
  ],
  "version": "1.2",
  "url": "https://eu.mouser.com/datasheet/2/783/bst_bmp585_ds003-3240059.pdf",
  "pages": "45",
  "flag": null
},
{
  "_id": {
    "$oid": "680100369a2431d66f0bee92"
  },
  "name": "BMP581",
  "manufacturer": "Bosch Sensortec",
  "type": "Sensor, Pressure",
  "pins": [
    {
      "number": "1",
      "name": "VDDIO",
      "description": "Digital interface supply"
    },
    {
      "number": "2",
      "name": "SCK",
      "description": "Serial clock input"
    },
    {
      "number": "3",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "SDI",
      "description": "Serial data input"
    },
    {
      "number": "5",
      "name": "SDO",
      "description": "Serial data output"
    },
    {
      "number": "6",
      "name": "CSB",
      "description": "Chip select"
    },
    {
      "number": "7",
      "name": "INT",
      "description": "INT output"
    },
    {
      "number": "8",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "9",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "10",
      "name": "VDD",
      "description": "Analog supply"
    }
  ],
  "version": "1.11",
  "url": "https://eu.mouser.com/datasheet/2/783/bst_bmp581_ds004-2950309.pdf",
  "pages": "46",
  "flag": null
},
{
  "_id": {
    "$oid": "680100ca9a2431d66f0bee93"
  },
  "name": "SDP800",
  "manufacturer": "Sensirion",
  "type": "Sensor, Pressure",
  "pins": [
    {
      "number": "1",
      "name": "SCL",
      "description": "Serial Clock (I2C Interface)"
    },
    {
      "number": "2",
      "name": "VDD",
      "description": "VDD Supply"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Connect to ground"
    },
    {
      "number": "4",
      "name": "SDA",
      "description": "Bidirectional Serial Data (I2C Interface)"
    }
  ],
  "version": "1.1",
  "url": "https://eu.mouser.com/datasheet/2/682/seri_s_a0008130567_1-2291061.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "680a33659a2431d66f0bee94"
  },
  "name": "VL53L3CX",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Proximity",
  "pins": [
    {
      "number": "1",
      "name": "AVDDVCSEL",
      "description": "VCSEL supply, to be connected to main supply"
    },
    {
      "number": "2",
      "name": "AVSSVCSEL",
      "description": "VCSEL ground, to be connected to main ground"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "To be connected to main ground"
    },
    {
      "number": "4",
      "name": "GND2",
      "description": "To be connected to main ground"
    },
    {
      "number": "5",
      "name": "XSHUT",
      "description": "Xshutdown pin, active low"
    },
    {
      "number": "6",
      "name": "GND3",
      "description": "To be connected to main ground"
    },
    {
      "number": "7",
      "name": "GPIO1",
      "description": "Interrupt output. Open drain output"
    },
    {
      "number": "8",
      "name": "DNC",
      "description": "Do not connect, must be left floating"
    },
    {
      "number": "9",
      "name": "SDA",
      "description": "I2C serial data"
    },
    {
      "number": "10",
      "name": "SCL",
      "description": "I2C serial clock input"
    },
    {
      "number": "11",
      "name": "AVDD",
      "description": "Supply, to be connected to main supply"
    },
    {
      "number": "12",
      "name": "GND4",
      "description": "Supply, to be connected to main supply"
    }
  ],
  "version": "Rev. 6",
  "url": "https://eu.mouser.com/datasheet/2/389/vl53l3cx-1799823.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "680a34ec9a2431d66f0bee95"
  },
  "name": "VL53L7CH",
  "manufacturer": "STMicroelectronics",
  "type": "Sensor, Proximity",
  "pins": [
    {
      "number": "A1",
      "name": "I2C_RST",
      "description": "I2C interface reset pin, active high. Toggle this\npin from 0 to 1, then back to 0 to reset the I2C\ntarget. Connect to GND via a 47 kΩ resistor."
    },
    {
      "number": "A2",
      "name": "RSVD4",
      "description": "Connect to ground"
    },
    {
      "number": "A3",
      "name": "INT",
      "description": "Interrupt output, defaults to opendrain output (tristate), 47 kΩ pullup resistor to IOVDD required"
    },
    {
      "number": "A4",
      "name": "IOVDD",
      "description": "1.8 V, 2.8 V or 3.3 V supply for digital core and I/O supply"
    },
    {
      "number": "A5",
      "name": "LPn",
      "description": "Comms enable. Drive this pin to logic 0 to disable the I2C comms. Drive this pin to logic 1 to enable I2C comms. Typically used when it is required to change the I2C address in multidevice systems. A 47 kΩ pullup resistor to IOVDD is required."
    },
    {
      "number": "A6",
      "name": "RSVD1",
      "description": "Connect to ground"
    },
    {
      "number": "A7",
      "name": "RSVD2",
      "description": "Connect to ground"
    },
    {
      "number": "B1",
      "name": "AVDD",
      "description": "2.8 V or 3.3 V analog and VCSEL supply"
    },
    {
      "number": "B4",
      "name": "THERMALPAD",
      "description": "Connect to a ground plane to allow good thermal conduction"
    },
    {
      "number": "B7",
      "name": "AVDD",
      "description": "2.8 V or 3.3 V analog and VCSEL supply"
    },
    {
      "number": "C1",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "C2",
      "name": "RSVD6",
      "description": "General purpose I/O, defaults to opendrain output (tristate), 47 kΩ pullup resistor to IOVDD required"
    },
    {
      "number": "C3",
      "name": "SDA",
      "description": "Data (bidirectional), 2.2 kΩ pullup resistor to IOVDD required"
    },
    {
      "number": "C4",
      "name": "SCL",
      "description": "Clock (input), 2.2 kΩ pullup resistor to IOVDD required"
    },
    {
      "number": "C5",
      "name": "RSVD5",
      "description": "Do not connect"
    },
    {
      "number": "C6",
      "name": "RSVD3",
      "description": "Connect to ground"
    },
    {
      "number": "C7",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "Rev. 3",
  "url": "https://www.st.com/resource/en/datasheet/vl53l7ch.pdf",
  "pages": "7"
},
{
  "_id": {
    "$oid": "680a3d399a2431d66f0bee97"
  },
  "name": "MAX30102",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Biometric Sensor",
  "pins": [
    {
      "number": "1",
      "name": "N.C.",
      "description": "No Connection. Connect to PCB pad for mechanical stability."
    },
    {
      "number": "2",
      "name": "SCL",
      "description": "I2C Clock Input"
    },
    {
      "number": "3",
      "name": "SDA",
      "description": "I2C Data, Bidirectional (Open-Drain)"
    },
    {
      "number": "4",
      "name": "PGND",
      "description": "Power Ground of the LED Driver Blocks"
    },
    {
      "number": "5",
      "name": "N.C.",
      "description": "No Connection. Connect to PCB pad for mechanical stability."
    },
    {
      "number": "6",
      "name": "N.C.",
      "description": "No Connection. Connect to PCB pad for mechanical stability."
    },
    {
      "number": "7",
      "name": "N.C.",
      "description": "No Connection. Connect to PCB pad for mechanical stability."
    },
    {
      "number": "8",
      "name": "N.C.",
      "description": "No Connection. Connect to PCB pad for mechanical stability."
    },
    {
      "number": "9",
      "name": "VLED+",
      "description": "LED Power Supply (anode connection). Use a bypass capacitor to PGND for best performance."
    },
    {
      "number": "10",
      "name": "VLED+",
      "description": "LED Power Supply (anode connection). Use a bypass capacitor to PGND for best performance."
    },
    {
      "number": "11",
      "name": "VDD",
      "description": "Analog Power Supply Input. Use a bypass capacitor to GND for best performance."
    },
    {
      "number": "12",
      "name": "GND",
      "description": "Analog Ground"
    },
    {
      "number": "13",
      "name": "INT",
      "description": "Active-Low Interrupt (Open-Drain). Connect to an external voltage with a pullup resistor."
    }
  ],
  "version": "Rev 1",
  "url": "https://eu.mouser.com/datasheet/2/609/MAX30102-3469632.pdf",
  "pages": "8"
},
{
  "_id": {
    "$oid": "680a3fa79a2431d66f0bee98"
  },
  "name": "MAX32663A",
  "manufacturer": "Analog Devices",
  "type": "Sensor, Biometric Sensor",
  "pins": [
    {
      "number": "1",
      "name": "D.N.C.",
      "description": "This pin is internally connected. Do not make any electrical connection, including VSS, to this pin."
    },
    {
      "number": "2",
      "name": "D.N.C.",
      "description": "This pin is internally connected. Do not make any electrical connection, including VSS, to this pin."
    },
    {
      "number": "3",
      "name": "NC",
      "description": "This pin is not connected to the die and can be used to route any signal."
    },
    {
      "number": "4",
      "name": "INT",
      "description": "This pin is asserted low by the MAX32663A when the device requires servicing through the I2C interface."
    },
    {
      "number": "5",
      "name": "D.N.C.",
      "description": "This pin is internally connected. Do not make any electrical connection, including VSS, to this pin."
    },
    {
      "number": "6",
      "name": "RSTN",
      "description": "External System Reset (Active-Low) Input. The device remains in reset while this pin is in its active state. When the pin transitions to its inactive state, the device performs a reset (resetting all logic on all supplies except for real-time clock circuitry) and begins execution. This pin is internally connected with an internal pullup to the VDD supply as indicated in the Electrical Characteristics table. Add and place a noise snubber circuit as close as possible to the device with component values shown in the Typical Application Circuit."
    },
    {
      "number": "7",
      "name": "VSS",
      "description": "—"
    },
    {
      "number": "8",
      "name": "32KOUT",
      "description": "—"
    },
    {
      "number": "9",
      "name": "32KIN",
      "description": "Connect a 32.768kHz crystal between 32KIN and 32KOUT for RTC operation. Optionally, an external clock source can be driven on 32KIN if the 32KOUT pin is left unconnected."
    },
    {
      "number": "10",
      "name": "VSS",
      "description": "—"
    },
    {
      "number": "11",
      "name": "VDD",
      "description": "This pin must be bypassed to VSSwith a 1.0μF capacitor as close as possible to the package. The device operates solely from this one power supply pin."
    },
    {
      "number": "12",
      "name": "VCORE",
      "description": "VCORE must always be bypassed to VSS with a 1.0μF capacitor as close as possible to the package. Do not connect this device pin to any other circuits."
    },
    {
      "number": "13",
      "name": "INTB",
      "description": "This pin is an active-low interrupt input. It connects to the INTB interrupt output of the MAX30003."
    },
    {
      "number": "14",
      "name": "INT2B",
      "description": "This pin is an active-low interrupt input. It connects to the INT2B interrupt output of the MAX30003."
    },
    {
      "number": "15",
      "name": "NC",
      "description": "This pin is not connected to the die and can be used to route any signal."
    },
    {
      "number": "16",
      "name": "D.N.C.",
      "description": "This pin is internally connected. Do not make any electrical connection, including VSS, to this pin."
    },
    {
      "number": "17",
      "name": "D.N.C.",
      "description": "This pin is internally connected. Do not make any electrical connection, including VSS, to this pin."
    },
    {
      "number": "18",
      "name": "SENSOR_CS",
      "description": "This is the SPI master chip select output that should be connected to the MAX30003 CSB input."
    },
    {
      "number": "19",
      "name": "SENSOR_SCK",
      "description": "This is the SPI master clock output that should be connected to the MAX30003 SCLK input."
    },
    {
      "number": "20",
      "name": "SENSOR_MOSI",
      "description": "This is the SPI master-out, slave-in that should be connected to the MAX30003 SDI pin."
    },
    {
      "number": "21",
      "name": "SENSOR_MISO",
      "description": "This is the SPI master-in, slave-out that should be connected to the MAX30003 SDO pin."
    },
    {
      "number": "22",
      "name": "VDD",
      "description": "This pin must be bypassed to VSSwith a 1.0μF capacitor as close as possible to the package. The device operates solely from this one power supply pin."
    },
    {
      "number": "23",
      "name": "SLAVE_SDA",
      "description": "This is the I2C slave SDA that should be connected to the host I2C master SDA."
    },
    {
      "number": "24",
      "name": "SLAVE_SCL",
      "description": "This is the I2C slave SCL that should be connected to the host I2C master SCL."
    }
  ],
  "version": "Rev 0",
  "url": "https://eu.mouser.com/datasheet/2/609/MAX32663A-3469681.pdf",
  "pages": "10, 11"
},
{
  "_id": {
    "$oid": "680a40fb9a2431d66f0bee99"
  },
  "name": "SFH 7050A",
  "manufacturer": "ams OSRAM",
  "type": "Sensor, Biometric Sensor",
  "pins": [
    {
      "number": "1",
      "name": "Green",
      "description": "Green LED Cathode"
    },
    {
      "number": "2",
      "name": "Green",
      "description": "Green LED Anode"
    },
    {
      "number": "3",
      "name": "Red",
      "description": "Red LED Anode"
    },
    {
      "number": "4",
      "name": "PD",
      "description": "Photodiode Anode"
    },
    {
      "number": "5",
      "name": "PD",
      "description": "Photodiode Cathode"
    },
    {
      "number": "6",
      "name": "Red",
      "description": "Red LED Cathode"
    },
    {
      "number": "7",
      "name": "IR",
      "description": "IR LED Anode"
    },
    {
      "number": "8",
      "name": "IR",
      "description": "IR LED Cathode"
    }
  ],
  "version": "1.1",
  "url": "https://eu.mouser.com/datasheet/2/588/prd_pim_datasheet_17325321_EN_pdf-3418907.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "680a41c69a2431d66f0bee9a"
  },
  "name": "SDH 7060A",
  "manufacturer": "ams OSRAM",
  "type": "Sensor, Biometric Sensor",
  "pins": [
    {
      "number": "1",
      "name": "Red",
      "description": "Red LED Anode"
    },
    {
      "number": "2",
      "name": "Red",
      "description": "Red LED Cathode"
    },
    {
      "number": "3",
      "name": "Green 1",
      "description": "Green LED 1 Cathode"
    },
    {
      "number": "4",
      "name": "Green 1",
      "description": "Green LED 1 Anode"
    },
    {
      "number": "5",
      "name": "Green 2",
      "description": "Green LED 2 Anode"
    },
    {
      "number": "6",
      "name": "PD",
      "description": "Photodiode Anode"
    },
    {
      "number": "7",
      "name": "PD",
      "description": "Photodiode Cathode"
    },
    {
      "number": "8",
      "name": "Green 2",
      "description": "Green LED 2 Cathode"
    },
    {
      "number": "9",
      "name": "Green 3",
      "description": "Green LED 3 Anode"
    },
    {
      "number": "10",
      "name": "Green 3",
      "description": "Green LED 3 Cathode"
    },
    {
      "number": "11",
      "name": "IR",
      "description": "Infrared LED Cathode"
    },
    {
      "number": "12",
      "name": "IR",
      "description": "Infrared LED Anode"
    }
  ],
  "version": "1.1",
  "url": "https://eu.mouser.com/datasheet/2/588/prd_pim_datasheet_17326192_EN_pdf-3418928.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "680f85379a2431d66f0bee9b"
  },
  "name": "BH1790GLC",
  "manufacturer": "ROHM",
  "type": "Sensor, Biometric Sensor",
  "pins": [
    {
      "number": "1",
      "name": "VCC1",
      "description": "Power supply terminal"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "GND terminal"
    },
    {
      "number": "3",
      "name": "LED1",
      "description": "LED1 driver output"
    },
    {
      "number": "4",
      "name": "LED2",
      "description": "LED2 driver output"
    },
    {
      "number": "5",
      "name": "TEST1",
      "description": "TEST1 terminal"
    },
    {
      "number": "6",
      "name": "TEST3",
      "description": "TEST3 terminal"
    },
    {
      "number": "7",
      "name": "TEST2",
      "description": "TEST2 terminal"
    },
    {
      "number": "8",
      "name": "VCC2",
      "description": "IO Power supply terminal"
    },
    {
      "number": "9",
      "name": "SDA",
      "description": "I2C bus interface SDA terminal"
    },
    {
      "number": "10",
      "name": "SCL",
      "description": "I2C bus interface SCL terminal"
    }
  ],
  "version": "Rev. 004",
  "url": "https://fscdn.rohm.com/en/products/databook/datasheet/ic/sensor/pulse_wave/bh1790glc-e.pdf",
  "pages": "3",
  "flag": null
},
{
  "_id": {
    "$oid": "680f85f79a2431d66f0bee9c"
  },
  "name": "BH1792GLC",
  "manufacturer": "ROHM",
  "type": "Sensor, Biometric Sensor",
  "pins": [
    {
      "number": "1",
      "name": "VCC",
      "description": "Power supply"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "LED1",
      "description": "LED1 driver output"
    },
    {
      "number": "4",
      "name": "LED2",
      "description": "LED2 driver output"
    },
    {
      "number": "5",
      "name": "LED3",
      "description": "LED3 driver output"
    },
    {
      "number": "6",
      "name": "INT",
      "description": "Interrupt"
    },
    {
      "number": "7",
      "name": "TEST",
      "description": "TEST pin (Connect to GND)"
    },
    {
      "number": "8",
      "name": "TMONI",
      "description": "TEST Monitor pin (open)"
    },
    {
      "number": "9",
      "name": "SDA",
      "description": "I2C bus serial data"
    },
    {
      "number": "10",
      "name": "SCL",
      "description": "I2C bus serial clock"
    }
  ],
  "version": "Rev. 002",
  "url": "https://fscdn.rohm.com/en/products/databook/datasheet/ic/sensor/pulse_wave/bh1792glc-e.pdf",
  "pages": "3",
  "flag": null
},
{
  "_id": {
    "$oid": "680f88909a2431d66f0bee9d"
  },
  "name": "TMCS1100-Q1",
  "manufacturer": "Texas Instruments",
  "type": "Sensor, Current Sensor",
  "pins": [
    {
      "number": "1",
      "name": "IN+",
      "description": "Input current positive pin"
    },
    {
      "number": "2",
      "name": "IN+",
      "description": "Input current positive pin"
    },
    {
      "number": "3",
      "name": "IN-",
      "description": "Input current negative pin"
    },
    {
      "number": "4",
      "name": "IN-",
      "description": "Input current negative pin"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "6",
      "name": "VREF",
      "description": "Zero current output voltage reference"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Output voltage"
    },
    {
      "number": "8",
      "name": "VS",
      "description": "Power supply"
    }
  ],
  "version": "June 2021",
  "url": "https://www.ti.com/lit/ds/symlink/tmcs1100-q1.pdf?ts=1745782913127",
  "pages": "3"
},
{
  "_id": {
    "$oid": "680f8a9f9a2431d66f0bee9f"
  },
  "name": "ACS37002",
  "manufacturer": "Allegro MicroSystems",
  "type": "Sensor, Current Sensor",
  "pins": [
    {
      "number": "1",
      "name": "IP+",
      "description": "Terminals for current being sensed; fused internally"
    },
    {
      "number": "2",
      "name": "IP+",
      "description": "Terminals for current being sensed; fused internally"
    },
    {
      "number": "3",
      "name": "IP+",
      "description": "Terminals for current being sensed; fused internally"
    },
    {
      "number": "4",
      "name": "IP+",
      "description": "Terminals for current being sensed; fused internally"
    },
    {
      "number": "5",
      "name": "IP-",
      "description": "Terminals for current being sensed; fused internally"
    },
    {
      "number": "6",
      "name": "IP-",
      "description": "Terminals for current being sensed; fused internally"
    },
    {
      "number": "7",
      "name": "IP-",
      "description": "Terminals for current being sensed; fused internally"
    },
    {
      "number": "8",
      "name": "IP-",
      "description": "Terminals for current being sensed; fused internally"
    },
    {
      "number": "9",
      "name": "OCF",
      "description": "Overcurrent fault, open-drain"
    },
    {
      "number": "10",
      "name": "VCC",
      "description": "Device power supply terminal"
    },
    {
      "number": "11",
      "name": "VOC",
      "description": "Overcurrent fault operation point input"
    },
    {
      "number": "12",
      "name": "VIOUT",
      "description": "Analog output representing the current flowing through IP"
    },
    {
      "number": "13",
      "name": "VREF",
      "description": "Zero-current voltage reference"
    },
    {
      "number": "14",
      "name": "GAIN_SEL_1",
      "description": "1 Gain selection bit 1"
    },
    {
      "number": "15",
      "name": "GND",
      "description": "Device ground terminal"
    },
    {
      "number": "16",
      "name": "GAIN_SEL_0",
      "description": "Gain selection bit 0"
    }
  ],
  "version": "Rev. 10",
  "url": "https://eu.mouser.com/datasheet/2/1115/ACS37002_Datasheet-3178879.pdf",
  "pages": "6"
},
{
  "_id": {
    "$oid": "680f8b739a2431d66f0beea0"
  },
  "name": "ACS772",
  "manufacturer": "Allegro MicroSystems",
  "type": "Sensor, Current Sensor",
  "pins": [
    {
      "number": "1",
      "name": "VCC",
      "description": "Device power supply terminal"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Signal ground terminal"
    },
    {
      "number": "3",
      "name": "VIOUT",
      "description": "Analog output signal"
    },
    {
      "number": "4",
      "name": "IP+",
      "description": "Terminal for current being sampled"
    },
    {
      "number": "5",
      "name": "IP-",
      "description": "Terminal for current being sampled"
    }
  ],
  "version": "Rev. 20",
  "url": "https://eu.mouser.com/datasheet/2/1115/ACS772_Datasheet-3366530.pdf",
  "pages": "5"
},
{
  "_id": {
    "$oid": "680f8c5c9a2431d66f0beea1"
  },
  "name": "ACS732KMA",
  "manufacturer": "Allegro MicroSystems",
  "type": "Sensor, Current Sensor",
  "pins": [
    {
      "number": "1",
      "name": "IP+",
      "description": "Positive terminals for current being sensed; fused internally."
    },
    {
      "number": "2",
      "name": "IP+",
      "description": "Positive terminals for current being sensed; fused internally."
    },
    {
      "number": "3",
      "name": "IP+",
      "description": "Positive terminals for current being sensed; fused internally."
    },
    {
      "number": "4",
      "name": "IP+",
      "description": "Positive terminals for current being sensed; fused internally."
    },
    {
      "number": "5",
      "name": "IP-",
      "description": "Negative terminals for current being sensed; fused internally."
    },
    {
      "number": "6",
      "name": "IP-",
      "description": "Negative terminals for current being sensed; fused internally."
    },
    {
      "number": "7",
      "name": "IP-",
      "description": "Negative terminals for current being sensed; fused internally."
    },
    {
      "number": "8",
      "name": "IP-",
      "description": "Negative terminals for current being sensed; fused internally."
    },
    {
      "number": "9",
      "name": "PROGRAM",
      "description": "Programming input pin for factory calibration. Connect to ground for best ESD performance."
    },
    {
      "number": "10",
      "name": "GND",
      "description": "Device ground terminal."
    },
    {
      "number": "11",
      "name": "GND",
      "description": "Device ground terminal."
    },
    {
      "number": "12",
      "name": "VIOUT",
      "description": "Analog output signal."
    },
    {
      "number": "13",
      "name": "FAULT",
      "description": "Overcurrent Fault output. Open drain."
    },
    {
      "number": "14",
      "name": "VCC",
      "description": "Device power supply terminal."
    },
    {
      "number": "15",
      "name": "VCC",
      "description": "Device power supply terminal."
    },
    {
      "number": "16",
      "name": "VOC",
      "description": "Set the overcurrent fault threshold via external resistor divider on this pin."
    }
  ],
  "version": "Rev. 11",
  "url": "https://eu.mouser.com/datasheet/2/1115/ACS732_3KMA_Datasheet-2956231.pdf",
  "pages": "3"
},
{
  "_id": {
    "$oid": "680f8dfc9a2431d66f0beea2"
  },
  "name": "GO-SME",
  "manufacturer": "LEM",
  "type": "Sensor, Current Sensor",
  "pins": [
    {
      "number": "1",
      "name": "IN/OUT",
      "description": "Positive input of the primary current"
    },
    {
      "number": "2",
      "name": "IN/OUT",
      "description": "Positive input of the primary current"
    },
    {
      "number": "3",
      "name": "IN/OUT",
      "description": ""
    },
    {
      "number": "4",
      "name": "IN/OUT",
      "description": "Negative input of the primary current"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground terminal"
    },
    {
      "number": "6",
      "name": "IN/OUT",
      "description": "Reference voltage"
    },
    {
      "number": "7",
      "name": "OUT",
      "description": "Output voltage"
    },
    {
      "number": "8",
      "name": "PWR",
      "description": "Supply voltage"
    }
  ],
  "version": "Version 3",
  "url": "https://eu.mouser.com/datasheet/2/573/go_sme_series-3519900.pdf",
  "pages": "2"
},
{
  "_id": {
    "$oid": "680f8ec89a2431d66f0beea3"
  },
  "name": "GO-SMS",
  "manufacturer": "LEM",
  "type": "Sensor, Current Sensor",
  "pins": [
    {
      "number": "1",
      "name": "IP+",
      "description": "Positive input of the primary current"
    },
    {
      "number": "2",
      "name": "IP+",
      "description": "Positive input of the primary current"
    },
    {
      "number": "3",
      "name": "IP+",
      "description": "Positive input of the primary current"
    },
    {
      "number": "4",
      "name": "IP+",
      "description": "Positive input of the primary current"
    },
    {
      "number": "5",
      "name": "IP-",
      "description": "Negative input of the primary current"
    },
    {
      "number": "6",
      "name": "IP-",
      "description": "Negative input of the primary current"
    },
    {
      "number": "7",
      "name": "IP-",
      "description": "Negative input of the primary current"
    },
    {
      "number": "8",
      "name": "IP-",
      "description": "Negative input of the primary current"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "10",
      "name": "Uref",
      "description": "Reference voltage"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "12",
      "name": "Uout",
      "description": "Output voltage"
    },
    {
      "number": "13",
      "name": "OCD-EXT",
      "description": "External OCD"
    },
    {
      "number": "14",
      "name": "UC",
      "description": "Supply voltage"
    },
    {
      "number": "15",
      "name": "UE OCD",
      "description": "External OCD threshold voltage"
    },
    {
      "number": "16",
      "name": "OCD-INT",
      "description": "Internal OCD"
    }
  ],
  "version": "Version 3",
  "url": "https://eu.mouser.com/datasheet/2/573/go_sms_series-3519920.pdf",
  "pages": "2"
},
{
  "_id": {
    "$oid": "680f92c49a2431d66f0beea5"
  },
  "name": "AT42QT1060",
  "manufacturer": "Microchip Technology",
  "type": "Sensor, Capacitive Touch Sensor",
  "pins": [
    {
      "number": "1",
      "name": "SNS1K",
      "description": "To Cs capacitor and to key"
    },
    {
      "number": "2",
      "name": "SNS2K",
      "description": "To Cs capacitor and to key"
    },
    {
      "number": "3",
      "name": "VDD",
      "description": "Positive power pin"
    },
    {
      "number": "4",
      "name": "VSS",
      "description": "Ground power pin"
    },
    {
      "number": "5",
      "name": "IO5",
      "description": "I/O Port Pin 5"
    },
    {
      "number": "6",
      "name": "IO6",
      "description": "I/O Port Pin 6"
    },
    {
      "number": "7",
      "name": "SNS3K",
      "description": "To Cs capacitor and to key"
    },
    {
      "number": "8",
      "name": "SNS4K",
      "description": "To Cs capacitor and to key"
    },
    {
      "number": "9",
      "name": "SNS5K",
      "description": "To Cs capacitor and to key"
    },
    {
      "number": "10",
      "name": "SNS0",
      "description": "To Cs Capacitor"
    },
    {
      "number": "11",
      "name": "SNS1",
      "description": "To Cs Capacitor"
    },
    {
      "number": "12",
      "name": "SNS2",
      "description": "To Cs Capacitor"
    },
    {
      "number": "13",
      "name": "SNS3",
      "description": "To Cs Capacitor"
    }
  ],
  "version": "04/2015",
  "url": "https://eu.mouser.com/datasheet/2/268/Atmel_9505_AT42_QTouch_BSW_AT42QT1060_Datasheet-3445009.pdf",
  "pages": "2",
  "flag": null
},
{
  "_id": {
    "$oid": "680f97361bfffd9e419566f4"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bhi380",
  "pages": "3",
  "pins": [
    {
      "number": "1",
      "name": "HSDO",
      "description": "Host Interface SPI MISO / I2C address select"
    },
    {
      "number": "2",
      "name": "ASDX",
      "description": "OIS MOSI / Aux I2C SDA, M2: SPI MOSI / I2C SDA"
    },
    {
      "number": "3",
      "name": "ASCX",
      "description": "OIS Clock / Aux I2C SCL, M2: SPI SCK / I2C SCL"
    },
    {
      "number": "4",
      "name": "HIRQ",
      "description": "Host Interrupt Output"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Digital IO and Fuser Supply"
    },
    {
      "number": "6",
      "name": "GNDIO",
      "description": "Digital IO and Fuser Ground"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Analog Sensor Ground"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Analog Sensor Supply"
    },
    {
      "number": "9",
      "name": "VREG",
      "description": "Voltage regulator output"
    },
    {
      "number": "10",
      "name": "OCSB",
      "description": "OIS Chip Select Input, M2: SPI Chip Select 1"
    },
    {
      "number": "11",
      "name": "OSDO",
      "description": "OIS MISO, M2: SPI MISO / I2C unused"
    },
    {
      "number": "12",
      "name": "HCSB",
      "description": "Host Interface SPI CSN / Protocol Select"
    },
    {
      "number": "13",
      "name": "HSCX",
      "description": "Host Interface SPI SCK, I2C SCL"
    },
    {
      "number": "14",
      "name": "HSDX",
      "description": "Host Interface SPI MOSI, I2C SDA"
    },
    {
      "number": "15",
      "name": "JTAG_CLK/M3SCL",
      "description": "Fuser Debug Clock / M3 I2C SCL"
    },
    {
      "number": "16",
      "name": "JTAG_DIO",
      "description": "Fuser Debug Data"
    },
    {
      "number": "17",
      "name": "RESETN",
      "description": "Reset input, active low"
    },
    {
      "number": "18",
      "name": "M3SDA",
      "description": "M3 I2C SDA"
    },
    {
      "number": "19",
      "name": "RESV2",
      "description": "Reserved: do not connect"
    },
    {
      "number": "20",
      "name": "RESV1",
      "description": "Reserved: do not connect"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/product_flyer/bst-bhi380-fl000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97361bfffd9e419566f5"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_iis2dlpc",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to VDD, VDDIO, or GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT_2",
      "description": "Interrupt pin 2. Clock input when selected in single data conversion on demand"
    },
    {
      "number": "12",
      "name": "INT_1",
      "description": "Interrupt pin 1"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/iis2dlpc.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97361bfffd9e419566f6"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE5011",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "CLK",
      "description": "Chip Clock"
    },
    {
      "number": "2",
      "name": "SCK",
      "description": "SSC Clock"
    },
    {
      "number": "3",
      "name": "CS",
      "description": "SSC Chip Select"
    },
    {
      "number": "4",
      "name": "DATA",
      "description": "SSC Data, open drain"
    },
    {
      "number": "5",
      "name": "TST1",
      "description": "Test Pin 1, must be connected to GND"
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Supply Voltage"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "8",
      "name": "TST2",
      "description": "Test Pin 2, must be connected to GND"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE5011-DataSheet-v02_00-en.pdf?fileId=db3a30432ee77f32012f0c4368b5110e",
  "version": "2.0"
},
{
  "_id": {
    "$oid": "680f97361bfffd9e419566f7"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4906-3K",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4906_3K-DS-v01_00-en.pdf?fileId=db3a30432e25b009012e295e1ade3798",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f97361bfffd9e419566f8"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE49SRC8",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "I/O",
      "description": "PWM/SENT/SPC / programming interface I/O"
    },
    {
      "number": "2",
      "name": "CBUF",
      "description": "Buffer capacitor pin"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "5",
      "name": "n.c.",
      "description": "-"
    },
    {
      "number": "6",
      "name": "n.c.",
      "description": "-"
    },
    {
      "number": "7",
      "name": "n.c.",
      "description": "-"
    },
    {
      "number": "8",
      "name": "n.c.",
      "description": "-"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE49SR_c8_P8_S8-DataSheet-v01_11-EN.pdf?fileId=8ac78c8c8e7ead30018eead43dbd55b8",
  "version": "1.1.1"
},
{
  "_id": {
    "$oid": "680f97361bfffd9e419566f9"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4964-2M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4964-2M-DataSheet-v01_20-EN.pdf?fileId=db3a3043397219b60139725f709a006f",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97361bfffd9e419566fa"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1509SU",
  "pages": "14",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_sot23_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f97361bfffd9e419566fb"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4964-3K",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4964-3K-DataSheet-v01_20-EN.pdf?fileId=db3a3043397219b60139779f2b9f5404",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97361bfffd9e419566fc"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1505SU",
  "pages": "14",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_sot23_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f97361bfffd9e419566fd"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bma550",
  "pages": "2",
  "pins": [
    {
      "number": "1",
      "name": "TDM_SDOUT",
      "description": "TDM mode data output"
    },
    {
      "number": "2",
      "name": "TDM_WCLK",
      "description": "TDM mode word clock"
    },
    {
      "number": "3",
      "name": "VDDIO",
      "description": "Power Supply for I/O"
    },
    {
      "number": "4",
      "name": "I2C_SDA",
      "description": "I2C Serial Data"
    },
    {
      "number": "5",
      "name": "I2C_SCL",
      "description": "I2C Serial Clock"
    },
    {
      "number": "6",
      "name": "I2CASEL",
      "description": "I2C Address selection line"
    },
    {
      "number": "7",
      "name": "VDD",
      "description": "Power supply for VDD"
    },
    {
      "number": "8",
      "name": "GNDIO",
      "description": "0V Supply for I/O Pads"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0V Supply for Circuits"
    },
    {
      "number": "10",
      "name": "Res",
      "description": "Reserved"
    },
    {
      "number": "11",
      "name": "INT",
      "description": "Interrupt"
    },
    {
      "number": "12",
      "name": "TDM_BCLK",
      "description": "TDM Mode Bit Clock"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/products/motion_sensors/accelerometers/16_14/bst-bma550-fl000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97361bfffd9e419566fe"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bmi160",
  "pages": "101",
  "pins": [
    {
      "number": "1",
      "name": "SDO",
      "description": "Serial data output in SPI. Address select in I2C mode"
    },
    {
      "number": "2",
      "name": "ASDX",
      "description": "Magnetometer interface"
    },
    {
      "number": "3",
      "name": "ASCX",
      "description": "Magnetometer interface"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Interrupt pin 1"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage (1.2V ...3.6V)"
    },
    {
      "number": "6",
      "name": "GNDIO",
      "description": "Ground for I/O"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground for digital & analog"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply analog & digital domain (1.71 - 3.6V)"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Interrupt pin 2"
    },
    {
      "number": "10",
      "name": "OCSB",
      "description": "OIS interface"
    },
    {
      "number": "11",
      "name": "OSDO",
      "description": "OIS interface"
    },
    {
      "number": "12",
      "name": "CSB",
      "description": "Chip select for SPI mode / Protocol selection pin"
    },
    {
      "number": "13",
      "name": "SCX",
      "description": "SCK for SPI serial clock. SCL for I2C serial clock"
    },
    {
      "number": "14",
      "name": "SDX",
      "description": "SDA serial data I/O in I2C. MOSI serial data input in SPI 4-Wire. SISO serial data I/O in SPI 3-Wire"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi160-ds000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97361bfffd9e41956701"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_AXO315",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "14",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "15",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "16",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "20",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "25",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "27",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "28",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "26",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "24",
      "name": "MISO",
      "description": "Master Input Slave Output signal"
    },
    {
      "number": "23",
      "name": "MOSI",
      "description": "Master Output Slave Input signal"
    },
    {
      "number": "22",
      "name": "SCLK",
      "description": "SPI clock signal"
    },
    {
      "number": "21",
      "name": "SSB",
      "description": "Slave Selection signal. Active low"
    },
    {
      "number": "19",
      "name": "DRY",
      "description": "Data Ready flag. Generates a pulse when a new acceleration data is available"
    },
    {
      "number": "18",
      "name": "VDDIO",
      "description": "Reference voltage for the SPI signals and DRY, RSTB wires"
    },
    {
      "number": "17",
      "name": "RSTB",
      "description": "Reset. Reloads the internal calibration data. Active low"
    },
    {
      "number": "13",
      "name": "ST",
      "description": "Self-test status high when the sensor is properly operating"
    },
    {
      "number": "4",
      "name": "EN",
      "description": "Enable command. Active high."
    },
    {
      "number": "2",
      "name": "LVREF",
      "description": "External decoupling pad. MUST be connected to the board's GND through a 100µF external capacitor, in order to ensure low noise."
    },
    {
      "number": "3",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    },
    {
      "number": "10",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    },
    {
      "number": "11",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    },
    {
      "number": "12",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/accelero/data_sheet/axo314_datasheet.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97361bfffd9e41956702"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_GYPRO4300",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "14",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "15",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "16",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "20",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "25",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "27",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "28",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "26",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "24",
      "name": "MISO",
      "description": "Master Input Slave Output signal"
    },
    {
      "number": "23",
      "name": "MOSI",
      "description": "Master Output Slave Input signal"
    },
    {
      "number": "22",
      "name": "SCLK",
      "description": "SPI clock signal"
    },
    {
      "number": "21",
      "name": "SSB",
      "description": "Slave Selection signal. Active low"
    },
    {
      "number": "19",
      "name": "DRY",
      "description": "Data Ready flag. Generates a pulse when a new acceleration data is available"
    },
    {
      "number": "18",
      "name": "VDDIO",
      "description": "Reference voltage for the SPI signals and DRY, RSTB wires"
    },
    {
      "number": "17",
      "name": "RSTB",
      "description": "Reset. Reloads the internal calibration data. Active low"
    },
    {
      "number": "13",
      "name": "ST",
      "description": "Self-test status high when the sensor is properly operating"
    },
    {
      "number": "4",
      "name": "EN",
      "description": "Enable command. Active high."
    },
    {
      "number": "2",
      "name": "LVREF",
      "description": "External decoupling pad. MUST be connected to the board's GND through a 100µF external capacitor, in order to ensure low noise."
    },
    {
      "number": "3",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    },
    {
      "number": "10",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    },
    {
      "number": "11",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    },
    {
      "number": "12",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    },
    {
      "number": "9",
      "name": "PLLF",
      "description": "External filtering pad. MUST be connected to a filtering stage"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/gyro/data_sheet/gypro4300_datasheet.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97361bfffd9e41956703"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_imp23absu",
  "pages": "2",
  "pins": [
    {
      "number": "1",
      "name": "Out",
      "description": "Output"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "GND"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "GND"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "GND"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply Voltage"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/imp23absu.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97361bfffd9e41956704"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lps27hhw",
  "pages": "8",
  "pins": [
    {
      "number": "1",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "SCL/SPC",
      "description": "I2C / MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "3",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "4",
      "name": "SDA,SDI,SDI/SDO",
      "description": "I2C / MIPI I3C serial data (SDA), 4-wire SPI serial data input (SDI), 3-wire serial data input/output (SDI/SDO)"
    },
    {
      "number": "5",
      "name": "SDO,SA0",
      "description": "4-wire SPI serial data output (SDO), I2C least significant bit of the device address (SA0), MIPI I3C least significant bit of the static address (SA0)"
    },
    {
      "number": "6",
      "name": "CS",
      "description": "Enables SPI, I2C and MIPI I3C / SPI mode selection (1: SPI idle mode / I2C and MIPI I3C communication enabled; 0: SPI communication mode / I2C and MIPI I3C disabled)"
    },
    {
      "number": "7",
      "name": "INT_DRDY",
      "description": "Interrupt or data-ready"
    },
    {
      "number": "8",
      "name": "GND_IO",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "VDD",
      "description": "Power supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lps27hhw.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97361bfffd9e41956705"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4946K",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "VS",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4946K-DataSheet-v01_00-EN.pdf?fileId=db3a30431f848401011fbc901e4d6379",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f97361bfffd9e41956706"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP226E3408",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "TEST",
      "description": "Test pin"
    },
    {
      "number": "2",
      "name": "CLOCK / VPROG",
      "description": "External clock for communication / programming\nvoltage"
    },
    {
      "number": "3",
      "name": "DATA IN",
      "description": "Serial data input pin"
    },
    {
      "number": "4",
      "name": "DATA OUT",
      "description": "Serial data output pin"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Circuit ground potential"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Analog pressure signal output"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Circuit ground potential"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP226E3408-DataSheet-v01_00-EN.pdf?fileId=8ac78c8c7cdc391c017cea768f020b0e",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956707"
  },
  "flag": "old",
  "manufacturer": "Texas Instruments",
  "name": "ti_TLV320ADC3101",
  "pages": "4-5",
  "pins": [
    {
      "number": "10",
      "name": "AVDD",
      "description": "Analog voltage supply, 2.6 V–3.6 V"
    },
    {
      "number": "9",
      "name": "AVSS",
      "description": "Analog ground supply, 0 V"
    },
    {
      "number": "1",
      "name": "BCLK",
      "description": "Audio serial data bus bit clock (input/output)"
    },
    {
      "number": "20",
      "name": "DMCLK/GPIO2",
      "description": "Digital microphone clock / general-purpose input/output 2 (input/output) / PLL clock input / audio serial data-bus bit-clock input/output / multifunction pin based on register programming"
    },
    {
      "number": "19",
      "name": "DMDIN/GPIO1",
      "description": "Digital microphone data input / general-purpose input/output 1 (input/output) / PLL clock mux output / AGC noise flag / multifunction pin based on register programming"
    },
    {
      "number": "3",
      "name": "DOUT",
      "description": "Audio serial data bus data output (output)"
    },
    {
      "number": "22",
      "name": "DVDD",
      "description": "Digital core voltage supply, 1.65 V–1.95 V"
    },
    {
      "number": "23",
      "name": "DVSS",
      "description": "Digital ground supply, 0 V"
    },
    {
      "number": "15",
      "name": "I2C_ADR0",
      "description": "LSB of I²C bus address"
    },
    {
      "number": "16",
      "name": "I2C_ADR1",
      "description": "LSB + 1 of I²C bus address"
    },
    {
      "number": "8",
      "name": "IN1L(P)",
      "description": "Mic or line analog input (left-channel single-ended or differential plus, or right channel)"
    },
    {
      "number": "11",
      "name": "IN1R(M)",
      "description": "Mic or line analog input (left-channel single-ended or differential minus, or left channel)"
    },
    {
      "number": "7",
      "name": "IN2L(P)",
      "description": "Mic or line analog input (left-channel single-ended or differential plus)"
    },
    {
      "number": "12",
      "name": "IN2R(P)",
      "description": "Mic or line analog input (right-channel single-ended or differential plus)"
    },
    {
      "number": "6",
      "name": "IN3L(M)",
      "description": "Mic or line analog input (left-channel single-ended or differential minus)"
    },
    {
      "number": "13",
      "name": "IN3R(M)",
      "description": "Mic or line analog input (right-channel single-ended or differential minus)"
    },
    {
      "number": "21",
      "name": "IOVDD",
      "description": "I/O voltage supply, 1.1 V–3.6 V"
    },
    {
      "number": "24",
      "name": "MCLK",
      "description": "Master clock input"
    },
    {
      "number": "5",
      "name": "MICBIAS1",
      "description": "MICBIAS1 bias voltage output"
    },
    {
      "number": "14",
      "name": "MICBIAS2",
      "description": "MICBIAS2 bias voltage output"
    },
    {
      "number": "4",
      "name": "RESET",
      "description": "Reset"
    },
    {
      "number": "17",
      "name": "SCL",
      "description": "I²C serial clock"
    },
    {
      "number": "18",
      "name": "SDA",
      "description": "I²C serial data input/output"
    },
    {
      "number": "2",
      "name": "WCLK",
      "description": "Audio serial data bus word clock (input/output)"
    }
  ],
  "type": "sensor",
  "url": "https://www.ti.com/lit/ds/symlink/tlv320adc3101.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956708"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP229L2920",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "TEST",
      "description": "Test pin"
    },
    {
      "number": "2",
      "name": "CLOCK / VPROG",
      "description": "External clock for communication / programming voltage"
    },
    {
      "number": "3",
      "name": "DATA IN",
      "description": "Serial data input pin"
    },
    {
      "number": "4",
      "name": "DATA OUT",
      "description": "Serial data output pin"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Circuit ground potential"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Analog pressure signal output"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Circuit ground potential"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP229L2920-DataSheet-v01_00-en.pdf?fileId=db3a30432ad629a6012af6be7d500b63",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956709"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_stts75",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "SDA",
      "description": "Serial data input/output"
    },
    {
      "number": "2",
      "name": "SCL",
      "description": "Serial clock input"
    },
    {
      "number": "3",
      "name": "!OS/INT",
      "description": "Overlimit signal/interrupt alert output"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "5",
      "name": "A2",
      "description": "Address2 input"
    },
    {
      "number": "6",
      "name": "A1",
      "description": "Address1 input"
    },
    {
      "number": "7",
      "name": "A0",
      "description": "Address0 input"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Supply voltage (2.7 V to 5.5 V)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/stts75.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97371bfffd9e4195670b"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP466P",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "NCS",
      "description": "Not-Chip-Select (active-low)"
    },
    {
      "number": "2",
      "name": "CLK",
      "description": "Serial Clock"
    },
    {
      "number": "3",
      "name": "SDI",
      "description": "Serial Data In"
    },
    {
      "number": "4",
      "name": "SDO",
      "description": "Serial Data Out"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "VPROG",
      "description": "Programming Voltage"
    },
    {
      "number": "7",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP466P-DataSheet-v01_10-EN.pdf?fileId=8ac78c8c8a8d344a018aa83ed9a77c81",
  "version": "1.10"
},
{
  "_id": {
    "$oid": "680f97371bfffd9e4195670d"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1870UA",
  "pages": "25",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply Voltage Pin"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "PWM Output Pin"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/linear/linear-hall/data_sheet/hal1870_programmable_linear_hall-effect_sensor_with_pwm_output.pdf",
  "version": "1"
},
{
  "_id": {
    "$oid": "680f97371bfffd9e4195670e"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1002UT",
  "pages": "23",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage and programming pin"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Push-pull output and selection pin"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_1002_highly_precise_programmable_hall-effect_switch.pdf",
  "version": "4"
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956710"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_asm330lhh",
  "pages": "12",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-Wire interface serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "2",
      "name": "RES",
      "description": "Connect to VddIO or GND"
    },
    {
      "number": "3",
      "name": "RES",
      "description": "Connect to VddIO or GND"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt #1"
    },
    {
      "number": "5",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "GNSD",
      "description": "Connect to GND"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Programmable interrupt #2 (INT2) / Data enabled (DEN)"
    },
    {
      "number": "10",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/asm330lhh.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956711"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1505UA",
  "pages": "15",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_to92_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956712"
  },
  "flag": "old",
  "manufacturer": "Murata",
  "name": "SCHA63T",
  "pages": "16",
  "pins": [
    {
      "number": "1",
      "name": "HEAT/EMC_GND",
      "description": "Heatsink interface to GNDA"
    },
    {
      "number": "2",
      "name": "MOSI",
      "description": "Data In of SPI Interface"
    },
    {
      "number": "3",
      "name": "CSB",
      "description": "Chip Selected of SPI Interface"
    },
    {
      "number": "4",
      "name": "SCK",
      "description": "Clock Signal of SPI Interface"
    },
    {
      "number": "5",
      "name": "MISO",
      "description": "Data Out of SPI Interface"
    },
    {
      "number": "6",
      "name": "V3p3D",
      "description": "Digital Supply voltage"
    },
    {
      "number": "7",
      "name": "V3p3A",
      "description": "Analog Supply voltage"
    },
    {
      "number": "8",
      "name": "GNDD",
      "description": "Digital Supply return (ground), connect externally to GNDA."
    },
    {
      "number": "9",
      "name": "VDDD",
      "description": "Regulated supply for digital core. Use external capacitor\nwhich is connected according to the diagram in Figure 15."
    },
    {
      "number": "10",
      "name": "GNDA / EMC_GND",
      "description": "Analog Supply return (ground), connect externally to GNDD"
    },
    {
      "number": "11",
      "name": "VDDA",
      "description": "Regulated supply for analog core. Use external capacitor\nwhich is connected according to the diagram in Figure 15."
    },
    {
      "number": "12",
      "name": "RESERVED",
      "description": "Factory use only, connect to GND"
    },
    {
      "number": "13",
      "name": "TIOP",
      "description": "Factory use only, connect to GND."
    },
    {
      "number": "14",
      "name": "TI/EXTRESN",
      "description": "Optional external Reset, 3.3V logic compatible Schmitt-\ntrigger input with internal pull-up, LOW-HIGH transition\ncauses system restart. Minimum low time 100us."
    },
    {
      "number": "15",
      "name": "TION",
      "description": "Factory use only, connect to GND."
    },
    {
      "number": "16",
      "name": "HEAT/EMC_GND",
      "description": "Heatsink interface to GNDA"
    },
    {
      "number": "17",
      "name": "HEAT/EMC_GND",
      "description": "Heatsink interface to GNDA"
    },
    {
      "number": "18",
      "name": "MOSI",
      "description": "Data In of SPI Interface"
    },
    {
      "number": "19",
      "name": "CSB",
      "description": "Chip Selected of SPI Interface"
    },
    {
      "number": "20",
      "name": "SCK",
      "description": "Clock Signal of SPI Interface"
    },
    {
      "number": "21",
      "name": "MISO",
      "description": "Data Out of SPI Interface"
    },
    {
      "number": "22",
      "name": "V3p3D",
      "description": "Digital Supply voltage"
    },
    {
      "number": "23",
      "name": "V3p3A",
      "description": "Analog Supply voltage"
    },
    {
      "number": "24",
      "name": "GNDD",
      "description": "Digital Supply return (ground), connect externally to GNDA."
    },
    {
      "number": "25",
      "name": "VDDD",
      "description": "Regulated supply for digital core. Use external capacitor\nwhich is connected according to the diagram in Figure 15."
    },
    {
      "number": "26",
      "name": "GNDA / EMC_GND",
      "description": "Analog Supply return (ground), connect externally to GNDD"
    },
    {
      "number": "27",
      "name": "VDDA",
      "description": "Regulated supply for analog core. Use external capacitor\nwhich is connected according to the diagram in Figure 15."
    },
    {
      "number": "28",
      "name": "RESERVED",
      "description": "Factory use only, connect to GND"
    },
    {
      "number": "29",
      "name": "TIOP",
      "description": "Factory use only, connect to GND."
    },
    {
      "number": "30",
      "name": "TI/EXTRESN",
      "description": "Optional external Reset, 3.3V logic compatible Schmitt-\ntrigger input with internal pull-up, LOW-HIGH transition\ncauses system restart. Minimum low time 100us."
    },
    {
      "number": "31",
      "name": "TION",
      "description": "Factory use only, connect to GND."
    },
    {
      "number": "32",
      "name": "HEAT/EMC_GND",
      "description": "EMC protection and ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.murata.com/-/media/webrenewal/products/sensor/pdf/datasheet/scha63t-k03_datasheet_short.ashx?la=en-gb&cvid=20231213062929000000",
  "version": "K03"
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956713"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lsm6dsr",
  "pages": "8",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-wire interface serial data output (SDO), I2C least significant bit of the device address (SA0)"
    },
    {
      "number": "2",
      "name": "SDx",
      "description": "Mode 1: Connect to VDDIO or GND, Mode 2: I2C serial data master (MSDA). Mode 3/4: Auxiliary SPI 3/4-wire interface serial data input (SDI_Aux) and SPI 3-wire serial data output (SDO_Aux)"
    },
    {
      "number": "3",
      "name": "SCx",
      "description": "Mode 1: Connect to VDDIO or GND, Mode 2: I2C serial clock master (MSCL), Mode 3/4: Auxiliary SPI 3-wire interface serial port clock (SPC_Aux)"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt in I2C and SPI"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Mode 1: Programmable interrupt 2 (INT2) / Data enable (DEN), Mode 2: Programmable interrupt 2 (INT2)/ Data enable (DEN)/ I2C master external synchronization signal (MDRDY), Mode 3/4: Programmable interrupt 2 (INT2)/ Data enable (DEN)"
    },
    {
      "number": "10",
      "name": "OCS_Aux",
      "description": "Mode 1: Leave unconnected, Mode 2: Leave unconnected, Mode 3/4: Auxiliary SPI 3/4-wire interface enable"
    },
    {
      "number": "11",
      "name": "SDO_Aux",
      "description": "Mode 1: Connect to VDDIO or leave unconnected, Mode 2: Connect to VDDIO or leave unconnected, Mode 3/4: Auxiliary SPI 3-wire interface: leave unconnected, Auxiliary SPI 4-wire interface: serial data output (SDO_Aux)"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/MIPI I3C/SPI mode\nselection (1: SPI idle mode / I2C/MIPI I3C communication enabled; 0: SPI communication mode / I2C/MIPI I3C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C/MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C/MIPI I3C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lsm6dsr.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956714"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1566UA",
  "pages": "14",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply and output"
    },
    {
      "number": "3",
      "name": "AUX",
      "description": "Functional test pin, connection to ground is recommended"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_156y_hall-effect_switch_with_current_interface_2-wire_in_to92_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956715"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_vl53l3cx",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "AVDDVCSEL",
      "description": "VCSEL supply, to be connected to main supply"
    },
    {
      "number": "2",
      "name": "AVSSVCSEL",
      "description": "VCSEL ground, to be connected to main ground\n"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "To be connected to the main ground"
    },
    {
      "number": "4",
      "name": "GND2",
      "description": "To be connected to the main ground"
    },
    {
      "number": "5",
      "name": "XSHUT",
      "description": "Xshutdown pin, active low"
    },
    {
      "number": "6",
      "name": "GND3",
      "description": "To be connected to the main ground"
    },
    {
      "number": "7",
      "name": "GPIO1",
      "description": "Interrupt output. Open drain output"
    },
    {
      "number": "8",
      "name": "DNC",
      "description": "Do not connect, must be left floating"
    },
    {
      "number": "9",
      "name": "SDA",
      "description": "I2C serial data"
    },
    {
      "number": "10",
      "name": "SCL",
      "description": "I2C serial clock input"
    },
    {
      "number": "11",
      "name": "AVDD",
      "description": "Supply, to be connected to the main supply"
    },
    {
      "number": "12",
      "name": "GND4",
      "description": "To be connected to the main ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/vl53l3cx.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956716"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1509UA",
  "pages": "15",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_to92_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956717"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE5014D",
  "pages": "3-4",
  "pins": [
    {
      "number": "1",
      "name": "IF1-1",
      "description": "address coding for programming in bus mode, channel 1 (see TLE5014 datasheet)\nconnect to GND for SENT / PWM interface"
    },
    {
      "number": "2",
      "name": "IF2-1",
      "description": "address coding for programming in bus mode, channel 1 (see TLE5014 datasheet)\nconnect to GND for SENT / PWM interface"
    },
    {
      "number": "3",
      "name": "IF3-1",
      "description": "connect to IFC"
    },
    {
      "number": "4",
      "name": "VDD-1",
      "description": "supply voltage, positive for channel 1"
    },
    {
      "number": "5",
      "name": "GND-1",
      "description": "supply voltage, ground for channel 1"
    },
    {
      "number": "6",
      "name": "IFA-1",
      "description": "connect to GND"
    },
    {
      "number": "7",
      "name": "IFB-1",
      "description": "SENT / SPC / PWM / SICI interface for channel 1"
    },
    {
      "number": "8",
      "name": "IFC-1",
      "description": "address coding for programming in bus mode, channel 1 (see TLE5014 datasheet)\nconnect to IF3"
    },
    {
      "number": "9",
      "name": "IFC-2",
      "description": "address coding for programming in bus mode, channel 2 (see TLE5014 datasheet)\nconnect to IF3"
    },
    {
      "number": "10",
      "name": "IFB-2",
      "description": "SENT / SPC / PWM / SICI interface for channel 2"
    },
    {
      "number": "11",
      "name": "IFA-2",
      "description": "connect to GND"
    },
    {
      "number": "12",
      "name": "GND-2",
      "description": "supply voltage, ground for channel 2"
    },
    {
      "number": "13",
      "name": "VDD-2",
      "description": "supply voltage, positive for channel 2"
    },
    {
      "number": "14",
      "name": "IF3-2",
      "description": "connect to IFC"
    },
    {
      "number": "15",
      "name": "IF2-2",
      "description": "address coding for programming in bus mode, channel 2 (see TLE5014 datasheet)\nconnect to GND for SENT / PWM interface"
    },
    {
      "number": "16",
      "name": "IF1-2",
      "description": "address coding for programming in bus mode, channel 2 (see TLE5014 datasheet)\nconnect to GND for SENT / PWM interface"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE5014C_P_S_16D-DataSheet-v01_00-EN.pdf?fileId=5546d46276fb756a01771a9fd67f3a19",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956718"
  },
  "flag": "old",
  "manufacturer": "Murata",
  "name": "SCA3100",
  "pages": "31",
  "pins": [
    {
      "number": "1",
      "name": "Reserved",
      "description": "Not used"
    },
    {
      "number": "2",
      "name": "Reserved",
      "description": "Factory use"
    },
    {
      "number": "3",
      "name": "AVSS",
      "description": "Negative power supply (analog)"
    },
    {
      "number": "4",
      "name": "AVDD",
      "description": "Positive power supply (analog)"
    },
    {
      "number": "5",
      "name": "CSB",
      "description": "Chip select"
    },
    {
      "number": "6",
      "name": "MISO",
      "description": "Data output"
    },
    {
      "number": "7",
      "name": "SCK",
      "description": "Serial clock"
    },
    {
      "number": "8",
      "name": "MOSI",
      "description": "Data input"
    },
    {
      "number": "9",
      "name": "PWM",
      "description": "Pulse Width Modulation output"
    },
    {
      "number": "10",
      "name": "DVDD",
      "description": "Positive power supply (digital)"
    },
    {
      "number": "11",
      "name": "DVSS",
      "description": "Negative power supply (digital)"
    },
    {
      "number": "12",
      "name": "EGnd",
      "description": "EMC ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.murata.com/-/media/webrenewal/products/sensor/pdf/specification/sca8x0_21x0_31x0_productfamilyspec.ashx?la=en&cvid=20210208012640000000",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956719"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1883UA",
  "pages": "13",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply Voltage Pin"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Push-Pull Output"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/linear/linear-hall/data_sheet/hal1881_hal1882_hal1883_preprogrammed_linear_hall-effect_sensors_in_to92ua_package.pdf",
  "version": "4"
},
{
  "_id": {
    "$oid": "680f97371bfffd9e4195671a"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4964-1K",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4964-1K-DataSheet-v01_02-EN.pdf?fileId=db3a304338ec6d390138fc87bfb376c5",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97371bfffd9e4195671b"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLV4976-2K",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VS",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "N.C.",
      "description": "No internal connection"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLV4976_2K-DS-v01_01-en.pdf?fileId=db3a30432b57a660012ba05b73310bac",
  "version": "1.1"
},
{
  "_id": {
    "$oid": "680f97371bfffd9e4195671c"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bhi260ap",
  "pages": "19-21",
  "pins": [
    {
      "number": "1",
      "name": "M3SDA",
      "description": "Master 3: I2C SDA (I2C Serial Data)"
    },
    {
      "number": "2",
      "name": "M3SCL",
      "description": "Master 3: I2C SCL (I2C Serial Clock)"
    },
    {
      "number": "3",
      "name": "HOSTBOOT",
      "description": "Boot mode select (host / standalone)"
    },
    {
      "number": "4",
      "name": "QSPI_D0",
      "description": "Quad-SPI Data 0"
    },
    {
      "number": "5",
      "name": "QSPI_CLK",
      "description": "Quad-SPI Clock"
    },
    {
      "number": "6",
      "name": "VREG",
      "description": "Voltage regulator output"
    },
    {
      "number": "7",
      "name": "VDDIO",
      "description": "Digital IO and Fuser2 Supply"
    },
    {
      "number": "8",
      "name": "QSPI_D3",
      "description": "Quad-SPI Data 3"
    },
    {
      "number": "9",
      "name": "RESETN",
      "description": "Reset input, active low"
    },
    {
      "number": "10",
      "name": "HIRQ",
      "description": "Host interrupt Signal (Output)"
    },
    {
      "number": "11",
      "name": "HSDX",
      "description": "Host interface Serial Data, SPI MOSI / I2C SDA"
    },
    {
      "number": "12",
      "name": "VDDIO",
      "description": "Digital IO and Fuser2 Supply"
    },
    {
      "number": "13",
      "name": "M2SCX",
      "description": "Master 2: SPI SCK / I2C SCL"
    },
    {
      "number": "14",
      "name": "QSPI_CSN",
      "description": "Quad-SPI Chip Select"
    },
    {
      "number": "15",
      "name": "QSPI_D1",
      "description": "Quad-SPI Data 1"
    },
    {
      "number": "16",
      "name": "MCSB3",
      "description": "SPI Chip Select 3 / GPIO"
    },
    {
      "number": "17",
      "name": "GNDIO",
      "description": "Digital IO and Fuser2 Core Ground"
    },
    {
      "number": "18",
      "name": "MCSB2",
      "description": "SPI Chip Select 2 / GPIO"
    },
    {
      "number": "19",
      "name": "MCSB4",
      "description": "SPI Chip Select 4 / GPIO"
    },
    {
      "number": "20",
      "name": "QSPI_D2",
      "description": "Quad-SPI Data 2"
    },
    {
      "number": "21",
      "name": "OCSB",
      "description": "Sensor Aux Interface: OIS mode: Chip Select, I2C mode: unused"
    },
    {
      "number": "22",
      "name": "ASCX",
      "description": "Sensor Aux interface: OIS mode: Clock, I2C mode: SCL"
    },
    {
      "number": "23",
      "name": "JTAG_CLK",
      "description": "Fuser2 Debug Clock"
    },
    {
      "number": "24",
      "name": "JTAG_DIO",
      "description": "Fuser2 Debug Data"
    },
    {
      "number": "25",
      "name": "GND",
      "description": "Analog Sensor Ground"
    },
    {
      "number": "26",
      "name": "GND",
      "description": "Analog Sensor Ground"
    },
    {
      "number": "27",
      "name": "GND",
      "description": "Analog Sensor Ground"
    },
    {
      "number": "28",
      "name": "VDD",
      "description": "Analog Sensor Supply"
    },
    {
      "number": "29",
      "name": "M1SCX",
      "description": "Master 1: SPI SCK / I2C SCL"
    },
    {
      "number": "30",
      "name": "ASDX",
      "description": "Sensor Aux Interface: OIS mode: MOSI, I2C mode: SDA"
    },
    {
      "number": "31",
      "name": "RESV3",
      "description": "Rserved: do not connect (internal IMU chip select)"
    },
    {
      "number": "32",
      "name": "HSDO",
      "description": "Host interface: SPI mode: MISO, I2C mode: address select"
    },
    {
      "number": "33",
      "name": "HSCX",
      "description": "Host interface: SPI SCK / I2C SCL"
    },
    {
      "number": "34",
      "name": "HCSB",
      "description": "Host interface: SPI mode: Chip Select, I2C: Switch to SPI mode* (to work in I2C mode, this line should be maintained as High)"
    },
    {
      "number": "35",
      "name": "M2SDX",
      "description": "Master 2: SPI MOSI / I2C SDA"
    },
    {
      "number": "36",
      "name": "GNDIO",
      "description": "Digital IO and Fuser2 Ground"
    },
    {
      "number": "37",
      "name": "M2SDI",
      "description": "Master 2: SPI MISO / I2C unused"
    },
    {
      "number": "38",
      "name": "MCSB1",
      "description": "SPI Chip Select 1"
    },
    {
      "number": "39",
      "name": "OSDO",
      "description": "Sensor Aux Interface: OIS mode: MISO, I2C mode: unused"
    },
    {
      "number": "40",
      "name": "RESV2",
      "description": "Reserved: do not connect (internal IMU interrupt)"
    },
    {
      "number": "41",
      "name": "RESV1",
      "description": "Reserved: do not connect (internal IMU interrupt)"
    },
    {
      "number": "42",
      "name": "VDDIO",
      "description": "Digital IO and Fuser2 Supply"
    },
    {
      "number": "43",
      "name": "M1SDI",
      "description": "Master 1: SPI MISO"
    },
    {
      "number": "44",
      "name": "M1SDX",
      "description": "Master 1: SPI MOSI / I2C SDA"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bhi260ap-ds000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97371bfffd9e4195671d"
  },
  "flag": "old",
  "manufacturer": "Texas Instruments",
  "name": "ti_TUSS4470",
  "pages": "3",
  "pins": [
    {
      "number": "1",
      "name": "OUT3",
      "description": "General-purpose digital output"
    },
    {
      "number": "2",
      "name": "DGND",
      "description": "Digital ground"
    },
    {
      "number": "3",
      "name": "NCS",
      "description": "SPI negative chip select"
    },
    {
      "number": "4",
      "name": "SCLK",
      "description": "SPI CLK"
    },
    {
      "number": "5",
      "name": "SDI",
      "description": "SPI data input"
    },
    {
      "number": "6",
      "name": "SDO",
      "description": "SPI data output"
    },
    {
      "number": "7",
      "name": "IO1",
      "description": "General-purpose digital input"
    },
    {
      "number": "8",
      "name": "IO2",
      "description": "General-purpose digital input"
    },
    {
      "number": "9",
      "name": "VOUT",
      "description": "Demodulated echo analog output"
    },
    {
      "number": "10",
      "name": "VDD",
      "description": "Voltage regulator input"
    },
    {
      "number": "11",
      "name": "INN",
      "description": "Negative transduer receive"
    },
    {
      "number": "12",
      "name": "INP",
      "description": "Positive transducer receive"
    },
    {
      "number": "13",
      "name": "SGND",
      "description": "Sensor ground (quiet)"
    },
    {
      "number": "14",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "15",
      "name": "OUTA",
      "description": "Transducer driver output A"
    },
    {
      "number": "16",
      "name": "OUTB",
      "description": "Transducer driver output B"
    },
    {
      "number": "17",
      "name": "VDRV",
      "description": "H-bridge driver supply voltage"
    },
    {
      "number": "18",
      "name": "FLT",
      "description": "Filter components"
    },
    {
      "number": "19",
      "name": "OUT4",
      "description": "General-purpose digital output"
    },
    {
      "number": "20",
      "name": "VPWR",
      "description": "Input supply voltage"
    }
  ],
  "type": "sensor",
  "url": "https://www.ti.com/lit/ds/slds251a/slds251a.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97371bfffd9e4195671e"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_h3lis200dl",
  "pages": "8",
  "pins": [
    {
      "number": "1",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "3",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "4",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "6",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "7",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "8",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (1: I2C mode; 0: SPI enabled)"
    },
    {
      "number": "9",
      "name": "INT_2",
      "description": "Inertial interrupt 2"
    },
    {
      "number": "10",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "11",
      "name": "INT_1",
      "description": "Inertial interrupt 1"
    },
    {
      "number": "12",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "13",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "14",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "15",
      "name": "Reserved",
      "description": "Connect to VDD"
    },
    {
      "number": "16",
      "name": "GND",
      "description": "0 V supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/h3lis200dl.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97371bfffd9e4195671f"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP464E",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "NCS",
      "description": "Not-Chip-Select (active-low)"
    },
    {
      "number": "2",
      "name": "CLK",
      "description": "Serial Clock"
    },
    {
      "number": "3",
      "name": "SDI",
      "description": "Serial Data In"
    },
    {
      "number": "4",
      "name": "SDO",
      "description": "Serial Data Out"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "VPROG",
      "description": "Programming Voltage"
    },
    {
      "number": "7",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP464E-DataSheet-v01_20-EN.pdf?fileId=8ac78c8c88ae21230188bf6d9a0611db",
  "version": "1.20"
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956720"
  },
  "flag": "old",
  "manufacturer": "Murata",
  "name": "SCA630",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "CLK",
      "description": ""
    },
    {
      "number": "2",
      "name": "C1",
      "description": ""
    },
    {
      "number": "3",
      "name": "MODE",
      "description": ""
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Negative supply voltage (VSS)"
    },
    {
      "number": "5",
      "name": "PGM",
      "description": ""
    },
    {
      "number": "6",
      "name": "ST",
      "description": "Self-test control"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Sensor output voltage"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Positive supply voltage (VDD)"
    }
  ],
  "type": "sensor",
  "url": "https://www.mouser.de/pdfdocs/sca630edcv1b_datasheet.PDF",
  "version": "EDCV1B"
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956722"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_vl53l1cx",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "AVDDVCSEL",
      "description": "VCSEL supply, to be connected to main supply"
    },
    {
      "number": "2",
      "name": "AVSSVCSEL",
      "description": "VCSEL ground, to be connected to main ground\n"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "To be connected to the main ground"
    },
    {
      "number": "4",
      "name": "GND2",
      "description": "To be connected to the main ground"
    },
    {
      "number": "5",
      "name": "XSHUT",
      "description": "Xshutdown pin, active low"
    },
    {
      "number": "6",
      "name": "GND3",
      "description": "To be connected to the main ground"
    },
    {
      "number": "7",
      "name": "GPIO1",
      "description": "Interrupt output. Open drain output"
    },
    {
      "number": "8",
      "name": "DNC",
      "description": "Do not connect, must be left floating"
    },
    {
      "number": "9",
      "name": "SDA",
      "description": "I2C serial data"
    },
    {
      "number": "10",
      "name": "SCL",
      "description": "I2C serial clock input"
    },
    {
      "number": "11",
      "name": "AVDD",
      "description": "Supply, to be connected to the main supply"
    },
    {
      "number": "12",
      "name": "GND4",
      "description": "To be connected to the main ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/vl53l1x.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956723"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_vl53l0x",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "AVDDVCSEL",
      "description": "VCSEL supply, to be connected to main supply"
    },
    {
      "number": "2",
      "name": "AVSSVCSEL",
      "description": "VCSEL ground, to be connected to main ground\n"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "To be connected to the main ground"
    },
    {
      "number": "4",
      "name": "GND2",
      "description": "To be connected to the main ground"
    },
    {
      "number": "5",
      "name": "XSHUT",
      "description": "Xshutdown pin, active low"
    },
    {
      "number": "6",
      "name": "GND3",
      "description": "To be connected to the main ground"
    },
    {
      "number": "7",
      "name": "GPIO1",
      "description": "Interrupt output. Open drain output"
    },
    {
      "number": "8",
      "name": "DNC",
      "description": "Do not connect, must be left floating"
    },
    {
      "number": "9",
      "name": "SDA",
      "description": "I2C serial data"
    },
    {
      "number": "10",
      "name": "SCL",
      "description": "I2C serial clock input"
    },
    {
      "number": "11",
      "name": "AVDD",
      "description": "Supply, to be connected to the main supply"
    },
    {
      "number": "12",
      "name": "GND4",
      "description": "To be connected to the main ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/vl53l0x.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956724"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bhi160b",
  "pages": "12",
  "pins": [
    {
      "number": "1",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "2",
      "name": "DNC",
      "description": "Do not connect (reserved)"
    },
    {
      "number": "3",
      "name": "GPIO1",
      "description": "Application specific I/O pin"
    },
    {
      "number": "4",
      "name": "RESV2",
      "description": "DO not connect (reserved)"
    },
    {
      "number": "5",
      "name": "RESV3",
      "description": "Do not connect (reserved)"
    },
    {
      "number": "6",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "7",
      "name": "ASCK",
      "description": "I2C Master serial clock, for connection of external sensors"
    },
    {
      "number": "8",
      "name": "VDDIO",
      "description": "Digital I/O power supply voltage (1.6 V ... 3.3 V)"
    },
    {
      "number": "9",
      "name": "SA_GPIO7",
      "description": "Select I2C address & Application specific I/O pin"
    },
    {
      "number": "10",
      "name": "VREG",
      "description": "Regulator filter capacitor connection"
    },
    {
      "number": "11",
      "name": "GPIO2",
      "description": "Application specific I/O pin"
    },
    {
      "number": "12",
      "name": "INT",
      "description": "Host interrupt"
    },
    {
      "number": "13",
      "name": "VDD",
      "description": "Analog power supply voltage (1.71 V ... 3.6 V)"
    },
    {
      "number": "14",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "15",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "16",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "17",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "18",
      "name": "GND",
      "description": "Analog power supply ground"
    },
    {
      "number": "19",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "20",
      "name": "GNDIO",
      "description": "Digital I/O power supply ground"
    },
    {
      "number": "21",
      "name": "ASDA",
      "description": "I2C Master serial data, for connection of external sensors"
    },
    {
      "number": "22",
      "name": "RESV4",
      "description": "Do not connect (reserved)"
    },
    {
      "number": "23",
      "name": "SCK",
      "description": "I2C serial clock (Host interface)"
    },
    {
      "number": "24",
      "name": "SDA",
      "description": "I2C serial data (Host interface)"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bhi160b-ds000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956725"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_ais2dw12",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to VDD, VDDIO, or GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2. Clock input when selected in single data conversion on demand."
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/ais2dw12.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956726"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bma422",
  "pages": "2",
  "pins": [
    {
      "number": "1",
      "name": "SDO",
      "description": "SPI: Serial Data Output. I2C: address select"
    },
    {
      "number": "2",
      "name": "SDX",
      "description": "Serial data I/O"
    },
    {
      "number": "3",
      "name": "VDDIO",
      "description": "Power supply"
    },
    {
      "number": "4",
      "name": "ASDA",
      "description": "Serial data I/O - Secondary Interface"
    },
    {
      "number": "5",
      "name": "INT1",
      "description": "Interrupt pin"
    },
    {
      "number": "6",
      "name": "INT2",
      "description": "Interrupt pin"
    },
    {
      "number": "7",
      "name": "VDD",
      "description": "Voltage supply"
    },
    {
      "number": "8",
      "name": "GNDIO",
      "description": "Ground"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "10",
      "name": "CSB",
      "description": "SPI: Chip select"
    },
    {
      "number": "11",
      "name": "ASCL",
      "description": "Digital clock (in) - Secondary Interface"
    },
    {
      "number": "12",
      "name": "SCX",
      "description": "Digital clock (in)"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/product_flyer/bst-bma422-fl000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956727"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bma530",
  "pages": "187",
  "pins": [
    {
      "number": "1",
      "name": "VSS",
      "description": "Ground (VSS=GND=GNDIO)"
    },
    {
      "number": "2",
      "name": "INT1",
      "description": "Interrupt pin 1. SPI 4-Wire: SDO/MISO. SPI 3-Wire: INT1. I2C/I3C: INT1"
    },
    {
      "number": "3",
      "name": "INT2",
      "description": "Interrupt pin 2. SPI 4-Wire: CSB. SPI 3-Wire: CSB. I2C/I3C: INT2* (or VDD, if unused)"
    },
    {
      "number": "4",
      "name": "SDA",
      "description": "Serial Data. SPI 4-Wire: SDI/MOSI. SPI 3-Wire: SDX. I2C/I3C: SDA"
    },
    {
      "number": "5",
      "name": "SCL",
      "description": "Serial Clock. SPI 4-Wire: SCK. SPI 3-Wire: SCK. I2C/I3C: SCL"
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Power supply analog & digital domain and digital I/O 1.62V ...3.63V (VDD=VDDIO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma530-ds000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956728"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lsm6dso32",
  "pages": "-1",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-wire interface serial data output (SDO), I2C least significant bit of the device address (SA0), MIPI I3C least significant bit of the static address (SA0)"
    },
    {
      "number": "2",
      "name": "SDx",
      "description": "Mode 1: Connect to Vdd_IO or GND, Mode 2: I2C serial data master (MSDA)"
    },
    {
      "number": "3",
      "name": "SCx",
      "description": "Mode 1: Connect to Vdd_IO or GND, Mode 2: I2C serial clock master (MSCL)"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt 1 / If device is used as MIPI I3C pure slave, this pin must be set to ‘1’"
    },
    {
      "number": "5",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Mode 1: Programmable interrupt 2, Mode 2: Programmable interrupt 2 (INT2) / Data enable(DEN) / I2C master external synchronization signal (MDRDY)"
    },
    {
      "number": "10",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/MIPI I3C/SPI mode selection (1: SPI idle mode / I2C/MIPI I3C communication enabled; 0: SPI communication mode / I2C/MIPI I3C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C/MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C/MIPI I3C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lsm6dso32.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97371bfffd9e41956729"
  },
  "flag": "old",
  "manufacturer": "Texas Instruments",
  "name": "TLV320AIC3100",
  "pages": "6-7",
  "pins": [
    {
      "number": "17",
      "name": "AVDD",
      "description": "Analog power supply"
    },
    {
      "number": "16",
      "name": "AVSS",
      "description": "Analog ground"
    },
    {
      "number": "7",
      "name": "BCLK",
      "description": "Audio serial bit clock"
    },
    {
      "number": "5",
      "name": "DIN",
      "description": "Audio serial data input"
    },
    {
      "number": "4",
      "name": "DOUT",
      "description": "Audio serial data output"
    },
    {
      "number": "3",
      "name": "DVDD",
      "description": "Digital power – digital core"
    },
    {
      "number": "18",
      "name": "DVSS",
      "description": "Digital ground"
    },
    {
      "number": "32",
      "name": "GPIO1",
      "description": "General-purpose input/output pin and multifunction pin"
    },
    {
      "number": "27",
      "name": "HPL",
      "description": "Left-channel headphone/line driver output"
    },
    {
      "number": "30",
      "name": "HPR",
      "description": "Right-channel headphone/line driver output"
    },
    {
      "number": "28",
      "name": "HPVDD",
      "description": "Headphone/line driver and PLL power"
    },
    {
      "number": "29",
      "name": "HPVSS",
      "description": "Headphone/line driver and PLL ground"
    },
    {
      "number": "2",
      "name": "IOVDD",
      "description": "Interface power"
    },
    {
      "number": "1",
      "name": "IOVSS",
      "description": "Interface ground"
    },
    {
      "number": "8",
      "name": "MCLK",
      "description": "External master clock"
    },
    {
      "number": "12",
      "name": "MICBIAS",
      "description": "Microphone bias voltage"
    },
    {
      "number": "15",
      "name": "MIC1LM",
      "description": "Microphone and line input routed to M or P input mixer"
    },
    {
      "number": "13",
      "name": "MIC1LP",
      "description": "Microphone and line input routed to P input mixer and left output mixer"
    },
    {
      "number": "14",
      "name": "MIC1RP",
      "description": "Microphone and line input routed to P input mixer and left and right output mixer"
    },
    {
      "number": "31",
      "name": "RESET",
      "description": "Device reset"
    },
    {
      "number": "10",
      "name": "SCL",
      "description": "I2C control bus clock input"
    },
    {
      "number": "9",
      "name": "SDA",
      "description": "I2C control-bus data input"
    },
    {
      "number": "19, 23",
      "name": "SPKM",
      "description": "Class-D speaker driver inverting output"
    },
    {
      "number": "22, 26",
      "name": "SPKP",
      "description": "Class-D speaker driver noninverting output"
    },
    {
      "number": "21",
      "name": "SPKVDD",
      "description": "Class-D speaker driver power supply"
    },
    {
      "number": "20",
      "name": "SPKVSS",
      "description": "Class-D speaker driver power supply ground"
    },
    {
      "number": "24",
      "name": "SPKVDD",
      "description": "Class-D speaker driver power supply"
    },
    {
      "number": "25",
      "name": "SPKVSS",
      "description": "Class-D speaker driver power supply ground"
    },
    {
      "number": "11",
      "name": "VOL/MICDET",
      "description": "Volume control or microphone, headphone, or headset detection"
    },
    {
      "number": "6",
      "name": "WCLK",
      "description": "Audio serial word clock"
    }
  ],
  "type": "sensor",
  "url": "https://www.ti.com/lit/ds/symlink/tlv320aic3100.pdf?ts=1727645524262",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97381bfffd9e4195672a"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_iis3dhhc",
  "pages": "2",
  "pins": [
    {
      "number": "1",
      "name": "SPC",
      "description": "Clock line for SPI 4-Wire interface (SPC)"
    },
    {
      "number": "2",
      "name": "SDI",
      "description": "Serial data input (SDI) line for SPI 4-Wire interface"
    },
    {
      "number": "3",
      "name": "SDO",
      "description": "Serial data output (SDO) line for SPI 4-Wire interface"
    },
    {
      "number": "4",
      "name": "CS",
      "description": "SPI chip-select line (CS)"
    },
    {
      "number": "5",
      "name": "INT2",
      "description": "Programmable interrupt 2 generated according to a configurable FIFO threshold in a dedicated register"
    },
    {
      "number": "6",
      "name": "INT1",
      "description": "Programmable interrupt 1 generated according to a configurable FIFO threshold in a dedicated register"
    },
    {
      "number": "7",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins, Recommended power supply decoupling capacitor (100 nF)"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply, Recommended power supply decoupling capacitors (100 nF ceramic in parallel with 10 µF aluminum)\n"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "11",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "12",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "13",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "14",
      "name": "Reserved",
      "description": "Connect to GND or leave unconnected"
    },
    {
      "number": "15",
      "name": "Reserved",
      "description": "Connect to GND or leave unconnected"
    },
    {
      "number": "16",
      "name": "Reserved",
      "description": "Connect to GND or leave unconnected"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/iis3dhhc.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97381bfffd9e4195672b"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1564UA",
  "pages": "14",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply and output"
    },
    {
      "number": "3",
      "name": "AUX",
      "description": "Functional test pin, connection to ground is recommended"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_156y_hall-effect_switch_with_current_interface_2-wire_in_to92_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e4195672c"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4964-4M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4964-4M-DataSheet-v01_20-EN.pdf?fileId=db3a30434039e4f701404e34e1192005",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e4195672d"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1507UA",
  "pages": "15",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_to92_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e4195672e"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lis331dlh",
  "pages": "8",
  "pins": [
    {
      "number": "1",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "3",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "4",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "6",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "7",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "8",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (1: I2C mode; 0: SPI enabled)"
    },
    {
      "number": "9",
      "name": "INT_2",
      "description": "Inertial interrupt 2"
    },
    {
      "number": "10",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "11",
      "name": "INT_1",
      "description": "Inertial interrupt 1"
    },
    {
      "number": "12",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "13",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "14",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "15",
      "name": "Reserved",
      "description": "Connect to VDD"
    },
    {
      "number": "16",
      "name": "GND",
      "description": "0 V supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lis331dlh.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97381bfffd9e4195672f"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4966-2G",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "Q2",
      "description": "Speed 2"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Recommended connection to GND"
    },
    {
      "number": "3",
      "name": "Q1",
      "description": "Speed 1"
    },
    {
      "number": "4",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Recommended connection to GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4966-2G-DataSheet-v01_00-EN.pdf?fileId=5546d4626b2d8e69016b511123480c28",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e41956730"
  },
  "flag": "old",
  "manufacturer": "Texas Instruments",
  "name": "TDC1011",
  "pages": "3",
  "pins": [
    {
      "number": "1",
      "name": "NC",
      "description": "No Connect (leave floating)"
    },
    {
      "number": "2",
      "name": "RX",
      "description": "Receive input"
    },
    {
      "number": "3",
      "name": "VCOM",
      "description": "Output common mode voltage bias"
    },
    {
      "number": "4",
      "name": "LNAOUT",
      "description": "Low noise amplifier output (for ac decoupling capacitor)"
    },
    {
      "number": "5",
      "name": "PGAIN",
      "description": "Programmable gain amplifier input"
    },
    {
      "number": "6",
      "name": "PGAOUT",
      "description": "Programmable gain amplifier output"
    },
    {
      "number": "7",
      "name": "COMPIN",
      "description": "Echo qualification and zero-crossing detector input"
    },
    {
      "number": "8",
      "name": "RTD1",
      "description": "Resistance temperature detector channel 1"
    },
    {
      "number": "9",
      "name": "RTD2",
      "description": "Resistance temperature detector channel 2"
    },
    {
      "number": "10",
      "name": "RREF",
      "description": "Reference resistor for temperature measurement"
    },
    {
      "number": "11",
      "name": "RES",
      "description": "Reserved (connect to GND)"
    },
    {
      "number": "12",
      "name": "ERRB",
      "description": "Error flag (open drain)"
    },
    {
      "number": "13",
      "name": "START",
      "description": "Start pulse output"
    },
    {
      "number": "14",
      "name": "STOP",
      "description": "Stop pulse output"
    },
    {
      "number": "15",
      "name": "EN",
      "description": "Enable (active high; when low the TDC1011 is in SLEEP mode)"
    },
    {
      "number": "16",
      "name": "TRIGGER",
      "description": "Trigger input"
    },
    {
      "number": "17",
      "name": "RESET",
      "description": "Reset (active high)"
    },
    {
      "number": "18",
      "name": "SCLK",
      "description": "Serial clock for the SPI interface"
    },
    {
      "number": "19",
      "name": "CSB",
      "description": "Chip select for the SPI interface (active low)"
    },
    {
      "number": "20",
      "name": "SDI",
      "description": "Serial data input for the SPI interface"
    },
    {
      "number": "21",
      "name": "SDO",
      "description": "Serial data output for the SPI interface"
    },
    {
      "number": "22",
      "name": "VIO",
      "description": "Positive I/O supply"
    },
    {
      "number": "23, 24",
      "name": "VDD",
      "description": "Positive supply; all VDD supply pins must be connected to the supply. Place a 100-nF bypass capacitor to ground in close proximity to the pin."
    },
    {
      "number": "25",
      "name": "CLKIN",
      "description": "Clock input"
    },
    {
      "number": "26",
      "name": "GND",
      "description": "Negative supply"
    },
    {
      "number": "27",
      "name": "NC",
      "description": "No Connect (leave floating)"
    },
    {
      "number": "28",
      "name": "TX",
      "description": "Transmit output"
    }
  ],
  "type": "sensor",
  "url": "https://www.ti.com/lit/ds/symlink/tdc1011.pdf?ts=1727703850340&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FTDC1011",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97381bfffd9e41956732"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLV4968-1TA",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "Q",
      "description": "Output"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLV4968_1TAB-DataSheet-v01_20-EN.pdf?fileId=5546d4624e765da5014ede5efa240c43",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e41956734"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLI493D-A2B6",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "SCL /INT",
      "description": "Interface serial clock pin (input)\nInterrupt pin, signals a finished measurement cycle, open-drain"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground Pin"
    },
    {
      "number": "4",
      "name": "VDD",
      "description": "Supply Pin"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "6",
      "name": "SDA",
      "description": "Interface serial data pin (input/output), open-drain"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLI493D-A2B6-DataSheet-v01_30-EN.pdf?fileId=5546d46262b31d2e0163162ca93b65fb",
  "version": "1.3"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e41956735"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAC3715UF",
  "pages": "44",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply Voltage"
    },
    {
      "number": "2",
      "name": "TEST1",
      "description": "Test"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "Test2",
      "description": "Test"
    },
    {
      "number": "5",
      "name": "OUT",
      "description": "Output and Programming"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/angle/direct-angle/data_sheet/hac_371x_hac_372x_hac_373x_programmable_2d_position_sensors_with_integrated_caps.pdf",
  "version": "2"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e41956736"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_ais3624dq",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "3",
      "name": "INT_2",
      "description": "Inertial interrupt 2"
    },
    {
      "number": "4",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "INT_1",
      "description": "Inertial interrupt 1"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "11",
      "name": "SPC/SCL",
      "description": "SPI serial port clock (SPC), I2C serial clock (SCL), Internal active pull-up"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (0: SPI enabled; 1: I2C mode), Internal active pull-up"
    },
    {
      "number": "13",
      "name": "Reserved",
      "description": "Connect to VDD"
    },
    {
      "number": "14",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "15",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0), Internal active pull-up"
    },
    {
      "number": "16",
      "name": "SDI/SDO/SDA",
      "description": "SPI serial data input (SDI), 3-Wire interface serial data output (SDO), I2C serial data (SDA), Internal active pull-up"
    },
    {
      "number": "17",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "18",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "19",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "20",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "21",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "22",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "23",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "24",
      "name": "NC",
      "description": "Not internally connected"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/ais3624dq.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97381bfffd9e41956737"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP264",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "NCS",
      "description": "Not-Chip-Select (active-low)"
    },
    {
      "number": "2",
      "name": "CLK",
      "description": "Serial Clock"
    },
    {
      "number": "3",
      "name": "SDI",
      "description": "Serial Data In"
    },
    {
      "number": "4",
      "name": "SDO",
      "description": "Serial Data Out"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "VPROG",
      "description": "Programming Voltage"
    },
    {
      "number": "7",
      "name": "NC",
      "description": "Not Connected"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP264-DataSheet-v01_00-EN.pdf?fileId=5546d4626eab8fbf016ef10a40d76c7f",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e41956738"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_ICM-40627",
  "pages": "18",
  "pins": [
    {
      "number": "1",
      "name": "AP_SDO / AP_AD0 ",
      "description": "AP_SDO: AP SPI serial data output (4-wire mode);\nAP_AD0: AP I2C slave address LSB"
    },
    {
      "number": "2",
      "name": "RESV",
      "description": "No Connect or Connect to GND"
    },
    {
      "number": "3",
      "name": "RESV",
      "description": "No Connect or Connect to GND"
    },
    {
      "number": "4",
      "name": "INT1 / INT",
      "description": "INT1: Interrupt 1 (Note: INT1 can be push-pull or open drain)\nINT: All interrupts mapped to pin 4"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "IO power supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Power supply ground"
    },
    {
      "number": "7",
      "name": "RESV",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply voltage"
    },
    {
      "number": "9",
      "name": "INT2 / FSYNC ",
      "description": "INT2: Interrupt 2 (Note: INT2 can be push-pull or open drain)\nFSYNC: Frame sync input; Connect to GND if FSYNC not used"
    },
    {
      "number": "10",
      "name": "RESV",
      "description": "No Connect or Connect to GND"
    },
    {
      "number": "11",
      "name": "RESV",
      "description": "No Connect or Connect to GND"
    },
    {
      "number": "12",
      "name": "AP_CS ",
      "description": "AP SPI Chip select (AP SPI interface); Connect to VDDIO if using AP I2C interface"
    },
    {
      "number": "13",
      "name": "AP_SCL / AP_SCLK ",
      "description": "AP_SCL: AP I2C serial clock; AP_SCLK: AP SPI serial clock"
    },
    {
      "number": "14",
      "name": "AP_SDA / AP_SDIO / AP_SDI",
      "description": "AP_SDA: AP I2C serial data; AP_SDIO: AP SPI serial data I/O (3-wire mode);\nAP_SDI: AP SPI serial data input (4-wire mode)"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/imu/data_sheet/ds-000381-icm-40627.pdf",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e41956739"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1881UA",
  "pages": "13",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply Voltage Pin"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Push-Pull Output"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/linear/linear-hall/data_sheet/hal1881_hal1882_hal1883_preprogrammed_linear_hall-effect_sensors_in_to92ua_package.pdf",
  "version": "4"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e4195673a"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4966G",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "Q2",
      "description": "Speed"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Recommended connection to GND"
    },
    {
      "number": "3",
      "name": "Q1",
      "description": "Direction"
    },
    {
      "number": "4",
      "name": "VS",
      "description": "Supply voltage"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Recommended connection to GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4966G-DataSheet-v01_01-EN.pdf?fileId=5546d4626b2d8e69016b50b5daa10900",
  "version": "1.01"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e4195673b"
  },
  "flag": "old",
  "manufacturer": "Murata",
  "name": "SCA3300",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "AVSS",
      "description": "Analog reference ground, connect externally to GND"
    },
    {
      "number": "2",
      "name": "A_EXTC",
      "description": "External capacitor connection for analog core"
    },
    {
      "number": "3",
      "name": "RESERVED",
      "description": "Factory use only, connect externally to GND"
    },
    {
      "number": "4",
      "name": "VDD",
      "description": "Analog Supply voltage"
    },
    {
      "number": "5",
      "name": "CSB",
      "description": "Chip Select of SPI Interface, 3.3V logic compatible Schmitt-trigger input"
    },
    {
      "number": "6",
      "name": "MISO",
      "description": "Data Out of SPI Interface"
    },
    {
      "number": "7",
      "name": "MOSI",
      "description": "Data In of SPI Interface, 3.3V logic compatible Schmitt-trigger input"
    },
    {
      "number": "8",
      "name": "SCK",
      "description": "CLK signal of SPI Interface"
    },
    {
      "number": "9",
      "name": "DVIO",
      "description": "SPI interface Supply Voltage"
    },
    {
      "number": "10",
      "name": "D_EXTC",
      "description": "External capacitor connection for digital core"
    },
    {
      "number": "11",
      "name": "DVSS",
      "description": "Digital reference ground, connect externally to GND. Must never be left\nfloating when component is powered."
    },
    {
      "number": "12",
      "name": "EMC_GND",
      "description": "EMC ground pin, connect externally to GND"
    }
  ],
  "type": "sensor",
  "url": "https://www.murata.com/-/media/webrenewal/products/sensor/pdf/datasheet/datasheet_sca3300-d01.ashx?la=en-gb&cvid=20190620010315610400",
  "version": "D01"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e4195673c"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLV4964-2M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLV4964-2M-DataSheet-v01_20-EN.pdf?fileId=5546d46268554f4a016874ee7b8d3f3a",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e4195673d"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1564SU",
  "pages": "13",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply and output"
    },
    {
      "number": "2",
      "name": "AUX",
      "description": "Functional test pin, connection to ground is recommended"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_156y_hall-effect_switches_with_current_interface_2-wire_in_sot23_package.pdf",
  "version": "4"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e4195673e"
  },
  "flag": "old",
  "manufacturer": "Murata",
  "name": "SCR1100",
  "pages": "14-15",
  "pins": [
    {
      "number": "1",
      "name": "HEAT",
      "description": "Heatsink connection, externally connected to AVSS_G."
    },
    {
      "number": "2",
      "name": "REFGND_G",
      "description": "Analog reference ground should be connected external to AVSS_G"
    },
    {
      "number": "3",
      "name": "VREFP_G",
      "description": "External C for positive reference voltage and output pin for use as supply\nfor external load. Max load is 5mA. Note this voltage can only be used as\nsupply for analog circuits. Circuits that produce high current spikes due to\nswitching circuit can not be driven by this node."
    },
    {
      "number": "4",
      "name": "EXTRESN_G",
      "description": "External Reset, 3.3V level Schmitt-trigger input with internal pull-up, High\nlow transition cause system restart"
    },
    {
      "number": "5",
      "name": "RESERVED",
      "description": "Factory used only, leave floating"
    },
    {
      "number": "6",
      "name": "AHVVDDS_G",
      "description": "External C for high voltage analog supply, high voltage pad ≈30V"
    },
    {
      "number": "7",
      "name": "LHV",
      "description": "Connection for inductor for high voltage generation, high voltage pad ≈30V"
    },
    {
      "number": "8",
      "name": "DVDD_G",
      "description": "Digital Supply Voltage"
    },
    {
      "number": "9",
      "name": "DVSS_G",
      "description": "Digital Supply Return, external connected to AVSS_G"
    },
    {
      "number": "10",
      "name": "MISO_G",
      "description": "Data Out of SPI Interface, 3.3V level, Level definition see SPI-section"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "Not connected, connect to GND or leave floating."
    },
    {
      "number": "12",
      "name": "NC",
      "description": "Not connected, connect to GND or leave floating."
    },
    {
      "number": "13",
      "name": "NC",
      "description": "Not connected, connect to GND or leave floating."
    },
    {
      "number": "14",
      "name": "NC",
      "description": "Not connected, connect to GND or leave floating."
    },
    {
      "number": "15",
      "name": "NC",
      "description": "Not connected, connect to GND or leave floating."
    },
    {
      "number": "16",
      "name": "HEAT",
      "description": "Heatsink connection, externally connected to AVSS_G."
    },
    {
      "number": "17",
      "name": "HEAT",
      "description": "Heatsink connection, externally connected to AVSS_G."
    },
    {
      "number": "18",
      "name": "NC",
      "description": "Not connected, connect to GND or leave floating."
    },
    {
      "number": "19",
      "name": "NC",
      "description": "Not connected, connect to GND or leave floating."
    },
    {
      "number": "19",
      "name": "NC",
      "description": "Not connected, connect to GND or leave floating."
    },
    {
      "number": "20",
      "name": "NC",
      "description": "Not connected, connect to GND or leave floating."
    },
    {
      "number": "21",
      "name": "NC",
      "description": "Not connected, connect to GND or leave floating."
    },
    {
      "number": "22",
      "name": "NC",
      "description": "Not connected, connect to GND or leave floating."
    },
    {
      "number": "23",
      "name": "MOSI_G",
      "description": "Data In of SPI Interface, 3.3V level Schmitt-trigger input"
    },
    {
      "number": "24",
      "name": "SCK_G",
      "description": "Clk Signal of SPI Interface, 3.3V level Schmitt-trigger input, Input Clock\nrange 2 to 8MHz. Level definition see SPI-section"
    },
    {
      "number": "25",
      "name": "CSN_G",
      "description": "Chip Select of SPI Interface, 3.3V level Schmitt-trigger input, Input Clock\nrange 2 to 8MHz. Level definition see SPI-section"
    },
    {
      "number": "26",
      "name": "RESERVED",
      "description": "Factory used only, leave floating"
    },
    {
      "number": "27",
      "name": "RESERVED",
      "description": "Factory used only, leave floating"
    },
    {
      "number": "28",
      "name": "AVDD_G",
      "description": "Analog Supply voltage"
    },
    {
      "number": "29",
      "name": "SUB",
      "description": "Connected external to AVSS_G"
    },
    {
      "number": "30",
      "name": "RESERVED",
      "description": "Factory used only, leave floating"
    },
    {
      "number": "31",
      "name": "RESERVED",
      "description": "Factory used only, leave floating"
    },
    {
      "number": "32",
      "name": "HEAT",
      "description": "Heat sink connection, externally connected to AVSS_G."
    }
  ],
  "type": "sensor",
  "url": "https://www.mouser.de/pdfdocs/scr1100d04_datasheet_v20_0.PDF",
  "version": "D04"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e4195673f"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_st1vafe3bx",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C/MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI/I2C/MIPI I3C mode selection (1: SPI idle mode / I2C/MIPI I3C enabled; 0: SPI enabled / I2C/MIPI I3C disabled)"
    },
    {
      "number": "3",
      "name": "SDO/TA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (TA0)"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C/MIPI I3C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to VDD, VDDIO, or GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "INT/EXT_CLK",
      "description": "Connect to GND if not used as an interrupt pin(3), External clock for synchronization of multiple sensors. This pin has an internal pull-down connected until the INT_PIN_EN bit is set to 1 in register CTRL1"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDDIO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "AH2/BIO2",
      "description": "AH input 2 (or BIO electrode 2)"
    },
    {
      "number": "12",
      "name": "AH1/BIO1",
      "description": "AH input 1 (or BIO electrode 1)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/st1vafe3bx.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97381bfffd9e41956740"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_stts2004",
  "pages": "11",
  "pins": [
    {
      "number": "1",
      "name": "A0",
      "description": "Serial bus address selection pin. Can be tied to VSS or VDD"
    },
    {
      "number": "2",
      "name": "A1",
      "description": "Serial bus address selection pin. Can be tied to VSS or VDD"
    },
    {
      "number": "3",
      "name": "A2",
      "description": "Serial bus address selection pin. Can be tied to VSS or VDD"
    },
    {
      "number": "4",
      "name": "VSS",
      "description": "Supply ground"
    },
    {
      "number": "5",
      "name": "SDA",
      "description": "Serial data"
    },
    {
      "number": "6",
      "name": "SCL",
      "description": "Serial clock"
    },
    {
      "number": "7",
      "name": "!EVENT",
      "description": "Event output pin. Open drain and active-low"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Supply power (2.2 V to 3.6 V)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/stts2004.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97381bfffd9e41956741"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1507SU",
  "pages": "14",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_sot23_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e41956743"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bma253",
  "pages": "105",
  "pins": [
    {
      "number": "1",
      "name": "SDO",
      "description": "Serial data output in SPI. Address select in I2C mode"
    },
    {
      "number": "2",
      "name": "SDX",
      "description": "SDA serial data I/O in I2C. SDI serial data input in SPI 4W. SDA serial data I/O in SPI 3W"
    },
    {
      "number": "3",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage (1.2V ...3.6V)"
    },
    {
      "number": "4",
      "name": "NC",
      "description": ""
    },
    {
      "number": "5",
      "name": "INT1",
      "description": "Interrupt output 1 (default)"
    },
    {
      "number": "6",
      "name": "INT2",
      "description": "Interrupt output 2 (default)"
    },
    {
      "number": "7",
      "name": "VDD",
      "description": "Power supply for analog & digital domain (1.62V ...3.6V)"
    },
    {
      "number": "8",
      "name": "GNDIO",
      "description": "Ground for I/O"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "Ground for digital & analog"
    },
    {
      "number": "10",
      "name": "CSB",
      "description": "Chip select for SPI mode. I2C: DNC"
    },
    {
      "number": "11",
      "name": "PS",
      "description": "Protocol select (GND=SPI, VDDIO=I2C)"
    },
    {
      "number": "12",
      "name": "SCX",
      "description": "SCK for SPI serial clock. SCL for I2C serial clock"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma253-ds000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97381bfffd9e41956744"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_iis328dq",
  "pages": "3",
  "pins": [
    {
      "number": "1",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "3",
      "name": "INT_2",
      "description": "Inertial interrupt 2"
    },
    {
      "number": "4",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "INT_1",
      "description": "Inertial interrupt 1"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "11",
      "name": "SPC/SCL",
      "description": "SPI serial port clock (SPC), I2C serial clock (SCL), Internal active pull-up"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (0: SPI enabled; 1: I2C mode), Internal active pull-up"
    },
    {
      "number": "13",
      "name": "Reserved",
      "description": "Connect to VDD"
    },
    {
      "number": "14",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "15",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0), Internal active pull-up"
    },
    {
      "number": "16",
      "name": "SDI/SDO/SDA",
      "description": "SPI serial data input (SDI), 3-Wire interface serial data output (SDO), I2C serial data (SDA), Internal active pull-up"
    },
    {
      "number": "17",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "18",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "19",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "20",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "21",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "22",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "23",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "24",
      "name": "NC",
      "description": "Not internally connected"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/iis328dq.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97381bfffd9e41956745"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4966-2K",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "Q2",
      "description": "Speed 2"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Recommended connection to GND"
    },
    {
      "number": "3",
      "name": "Q1",
      "description": "Speed 1"
    },
    {
      "number": "4",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Recommended connection to GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4966_2K-DS-v01_00-en.pdf?fileId=db3a30432c64a60d012c839016d83e32",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e41956746"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4976-2K",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "VS",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "N.C.",
      "description": "No internal connection"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4976_2K-DS-v01_02-en.pdf?fileId=db3a30432c59a87e012c5e9c3dc5351c",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e41956747"
  },
  "flag": "old",
  "manufacturer": "Texas Instruments",
  "name": "PCM1860",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "VINL2/VIN1M",
      "description": "Analog input 2, L-channel (or differential M input for input 1)"
    },
    {
      "number": "2",
      "name": "VINR2/VIN2M",
      "description": "Analog input 2, R-channel (or differential M input for input 2)"
    },
    {
      "number": "3",
      "name": "VINL1/VIN1P",
      "description": "Analog input 1, L-channel (or differential P input for input 1)"
    },
    {
      "number": "4",
      "name": "VINR1/VIN2P",
      "description": "Analog input 1, R-channel (or differential P input for input 2)"
    },
    {
      "number": "5",
      "name": "Mic Bias",
      "description": "Microphone bias output"
    },
    {
      "number": "6",
      "name": "VREF",
      "description": "Reference voltage output decoupling point (typically, 0.5 AVDD). Connect 1-μF capacitor from this pin to AGND."
    },
    {
      "number": "7",
      "name": "AGND",
      "description": "Analog ground"
    },
    {
      "number": "8",
      "name": "AVDD",
      "description": "Analog power supply (typically, 3.3 V). Connect 0.1-μF and 10-μF capacitors from this pin to AGND."
    },
    {
      "number": "9",
      "name": "XO",
      "description": "Crystal oscillator output"
    },
    {
      "number": "10",
      "name": "XI",
      "description": "Crystal oscillator input or master clock input (1.8-V CMOS signal)"
    },
    {
      "number": "22",
      "name": "LDO",
      "description": "Internal low-dropout regulator (LDO) decoupling output, or external 1.8-V input to bypass LDO. Connect 0.1-μF and 10-μF capacitors from this pin to DGND."
    },
    {
      "number": "12",
      "name": "DGND",
      "description": "Digital ground"
    },
    {
      "number": "13",
      "name": "DVDD",
      "description": "Digital power supply (typically, 3.3 V). Connect 0.1-μF and 10-μF capacitors from this pin to DGND."
    },
    {
      "number": "14",
      "name": "IOVDD",
      "description": "Power supply for I/O voltages (typically, 3.3 V or 1.8 V)."
    },
    {
      "number": "15",
      "name": "SCKI",
      "description": "CMOS level (3.3 V) master clock input"
    },
    {
      "number": "16",
      "name": "LRCK",
      "description": "Audio data word clock (left right clock) input/output(1)"
    },
    {
      "number": "17",
      "name": "BCK",
      "description": "Audio data bit clock input/output (1)"
    },
    {
      "number": "18",
      "name": "DOUT",
      "description": "Audio data digital output"
    },
    {
      "number": "19",
      "name": "INT",
      "description": "Interrupt output (for analog input detection). Pull high for active mode, pull low for idle."
    },
    {
      "number": "20",
      "name": "MD6",
      "description": "Analog MUX and gain selection using MD6, MD5, and MD2 pins, respectively: 000: SE Ch 1 (VINL1 and VINR1)\n001: SE Ch 2 (VINL2 and VINR2)\n010: SE Ch 3 (VINL3 and VINR3)\n011: SE Ch 4 (VINL4 and VINR4)\n100: SE Ch 4 with 12-dB gain\n101: SE Ch 4 with 32-dB gain\n110: Diff Ch 1 (VIN1P and VIN1M, VIN2P and VIN2M)\n111: Diff Ch 2 (VIN3P and VIN3M, VIN4P and VIN4M) with 12-dB gain"
    },
    {
      "number": "21",
      "name": "MD5",
      "description": "Analog MUX and gain selection (see MD6 pin for description)"
    },
    {
      "number": "22",
      "name": "MD4",
      "description": "Audio format: high = left-justified, low = I2S"
    },
    {
      "number": "23",
      "name": "MD2",
      "description": "Analog MUX and gain selection (see MD6 pin for description)"
    },
    {
      "number": "24",
      "name": "MD3",
      "description": "Filter select: 0 = FIR decimation filter, 1 = IIR low latency decimation filter"
    },
    {
      "number": "25",
      "name": "MD1",
      "description": "Audio interface mode selection using MD1 and MD0 pins, respectively: 00: Slave mode, 256 × fS, 384 × fS, 512 × fS autodetect\n01: Master mode (512 × fS)\n10: Master mode (384 × fS)\n11: Master mode (256 × fS)"
    },
    {
      "number": "26",
      "name": "MD0",
      "description": "Audio interface mode selection (see MD1 pin for description)"
    },
    {
      "number": "27",
      "name": "VINL4/VIN4M",
      "description": "Analog input 4, L-channel (or differential M input for input 4)"
    },
    {
      "number": "28",
      "name": "VINR4/VIN3M",
      "description": "Analog input 4, R-channel (or differential M input for input 3)"
    },
    {
      "number": "29",
      "name": "VINL3/VIN4P",
      "description": "Analog input 3, L-channel (or differential P input for input 4)"
    },
    {
      "number": "30",
      "name": "VINR3/VIN3P",
      "description": "Analog input 3, R-channel (or differential P input for input 3)"
    }
  ],
  "type": "sensor",
  "url": "https://www.ti.com/lit/ds/symlink/pcm1860.pdf?ts=1727705027727&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FPCM1860",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97381bfffd9e41956748"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_AXO314",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "14",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "15",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "16",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "20",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "25",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "27",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "28",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "26",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "24",
      "name": "MISO",
      "description": "Master Input Slave Output signal"
    },
    {
      "number": "23",
      "name": "MOSI",
      "description": "Master Output Slave Input signal"
    },
    {
      "number": "22",
      "name": "SCLK",
      "description": "SPI clock signal"
    },
    {
      "number": "21",
      "name": "SSB",
      "description": "Slave Selection signal. Active low"
    },
    {
      "number": "19",
      "name": "DRY",
      "description": "Data Ready flag. Generates a pulse when a new acceleration data is available"
    },
    {
      "number": "18",
      "name": "VDDIO",
      "description": "Reference voltage for the SPI signals and DRY, RSTB wires"
    },
    {
      "number": "17",
      "name": "RSTB",
      "description": "Reset. Reloads the internal calibration data. Active low"
    },
    {
      "number": "13",
      "name": "ST",
      "description": "Self-test status. Logic \"1\" when the sensor is OK"
    },
    {
      "number": "4",
      "name": "EN",
      "description": "Enable command. Active high."
    },
    {
      "number": "2",
      "name": "LVREF",
      "description": "External decoupling pad. MUST be connected to the board's GND through a 100µF external capacitor, in order to ensure low noise."
    },
    {
      "number": "3",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    },
    {
      "number": "10",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    },
    {
      "number": "11",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    },
    {
      "number": "12",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/accelero/data_sheet/axo314_datasheet.pdf",
  "version": "1"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e41956749"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4964-6M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4964-6M-DataSheet-v01_20-EN.pdf?fileId=db3a30434039e4f701404e2117c81fe3",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97381bfffd9e4195674a"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bmv080",
  "pages": "2",
  "pins": [
    {
      "number": "1",
      "name": "VDDL",
      "description": "Laser supply voltage (3.3V)"
    },
    {
      "number": "2",
      "name": "VSSA",
      "description": "Analog Ground"
    },
    {
      "number": "3",
      "name": "VDDA",
      "description": "ADC Supply (2.5 - 3.3V)"
    },
    {
      "number": "4",
      "name": "CSB",
      "description": "SPI: Slave select (nSS). nI²C: I²C address bit 1 (IAB1)"
    },
    {
      "number": "5",
      "name": "MOSI",
      "description": "SPI: Master Out Slave In. I²C: Serial data line (SDA)"
    },
    {
      "number": "6",
      "name": "SCK",
      "description": "Interface serial clock"
    },
    {
      "number": "7",
      "name": "PS",
      "description": "Interface protocol select"
    },
    {
      "number": "8",
      "name": "VDDIO",
      "description": "Interface power supply (1.2 - 3.3V)"
    },
    {
      "number": "9",
      "name": "VSSD",
      "description": "Digital Ground"
    },
    {
      "number": "10",
      "name": "VDDD",
      "description": "Digital supply voltage (2.5 - 3.3V)"
    },
    {
      "number": "11",
      "name": "MISO",
      "description": "SPI: Master in Slave Out. I²C: I²C address bit 0 (IAB0)"
    },
    {
      "number": "12",
      "name": "IRQ2",
      "description": "Interrupt 2 (digital out), Active low"
    },
    {
      "number": "13",
      "name": "IRQ1",
      "description": "Interrupt 1 (digital out), Active low"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/product_flyer/bst-bmv080-fl000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97381bfffd9e4195674b"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lps22ch",
  "pages": "8",
  "pins": [
    {
      "number": "1",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "3",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), 4-wire SPI serial data input (SDI), 3-wire serial data input/output (SDI/SDO)"
    },
    {
      "number": "5",
      "name": "SDO/SA0",
      "description": "4-wire SPI serial data output (SDO), I2C least significant bit of the device address (SA0)"
    },
    {
      "number": "6",
      "name": "CS",
      "description": "SPI enable, I2C / SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "7",
      "name": "INT_DRDY",
      "description": "Interrupt or Data-Ready"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "VDD",
      "description": "Power supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lps22ch.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97391bfffd9e4195674c"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bmp380",
  "pages": "2",
  "pins": [
    {
      "number": "1",
      "name": "VDDIO",
      "description": "Digital interface supply"
    },
    {
      "number": "2",
      "name": "SCK",
      "description": "Serial clock input"
    },
    {
      "number": "3",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "SDI",
      "description": "Serial data input"
    },
    {
      "number": "5",
      "name": "SDO",
      "description": "Serial data output"
    },
    {
      "number": "6",
      "name": "CSB",
      "description": "Chip select"
    },
    {
      "number": "7",
      "name": "INT",
      "description": "INT output"
    },
    {
      "number": "8",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "9",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "10",
      "name": "VDD",
      "description": "Analog supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/product_flyer/bst-bmp380-fl000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97391bfffd9e4195674d"
  },
  "flag": "old",
  "manufacturer": "Texas Instruments",
  "name": "PGA460",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "2",
      "name": "INP",
      "description": "Positive transducer receive"
    },
    {
      "number": "3",
      "name": "INN",
      "description": "Negative transducer receive"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "5",
      "name": "OUTA",
      "description": "Transducer driver output A"
    },
    {
      "number": "6",
      "name": "GNDP",
      "description": "Power ground"
    },
    {
      "number": "7",
      "name": "OUTB",
      "description": "Transducer driver output B"
    },
    {
      "number": "8",
      "name": "IO",
      "description": "Time-command interface data input and output"
    },
    {
      "number": "9",
      "name": "TEST",
      "description": "Test output pin"
    },
    {
      "number": "10",
      "name": "TXD",
      "description": "USART interface transmit"
    },
    {
      "number": "11",
      "name": "RXD",
      "description": "USART interface receive"
    },
    {
      "number": "12",
      "name": "SCLK",
      "description": "USART synchronous-mode clock input"
    },
    {
      "number": "13",
      "name": "DECPL",
      "description": "Decoupling transistor gate drive"
    },
    {
      "number": "14",
      "name": "IOREG",
      "description": "I/O buffer voltage regulator capacitor"
    },
    {
      "number": "15",
      "name": "VPWR",
      "description": "Power-supply voltage"
    },
    {
      "number": "16",
      "name": "AVDD",
      "description": "Analog voltage-regulator capacitor"
    }
  ],
  "type": "sensor",
  "url": "https://www.ti.com/lit/ds/symlink/pga460.pdf?ts=1727706084001&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FPGA460",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97391bfffd9e4195674e"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_a3g4250d",
  "pages": "8",
  "pins": [
    {
      "number": "1",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "3",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "4",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "5",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "6",
      "name": "DRDY/INT2",
      "description": "Data ready/FIFO interrupt"
    },
    {
      "number": "7",
      "name": "INT1",
      "description": "Programmable interrupt"
    },
    {
      "number": "8",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "9",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "10",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "11",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "12",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "13",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "14",
      "name": "PLLFILT",
      "description": "Phase-locked loop filter"
    },
    {
      "number": "15",
      "name": "Reserved",
      "description": "Connect to VDD"
    },
    {
      "number": "16",
      "name": "VDD",
      "description": "Power supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/a3g4250d.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97391bfffd9e4195674f"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_mp23abs1",
  "pages": "3",
  "pins": [
    {
      "number": "1",
      "name": "Out",
      "description": "Output"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "GND"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "GND"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "GND"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply Voltage"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/mp23abs1.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97391bfffd9e41956751"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lis2dtw12",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to VDD, VDDIO, or GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2. Clock input when selected in single data conversion on demand."
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lis2dtw12.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97391bfffd9e41956752"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4999C8",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "CBUF",
      "description": "Buffer capacitor pin"
    },
    {
      "number": "2",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "OUT",
      "description": "SPC output / programming interface I/O"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "6",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "7",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "8",
      "name": "NC",
      "description": "Not connected"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4999C8-DataSheet-v01_10-EN.pdf?fileId=5546d46276fb756a0177164be045656b",
  "version": "01_10"
},
{
  "_id": {
    "$oid": "680f97391bfffd9e41956753"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_stts751",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "SCL",
      "description": "SMBus clock"
    },
    {
      "number": "2",
      "name": "EVENT",
      "description": "Open-drain interrupt output. Output supports the SMBus Alert (ARA). Note: This pin may not float."
    },
    {
      "number": "3",
      "name": "VDD",
      "description": "Power supply VDD"
    },
    {
      "number": "4",
      "name": "Addr/Therm",
      "description": "Open-drain output that can be used to turn on/off a fan or throttle a CPU clock in the event of an overtemperature condition. The pin at power-up determines the SMBus slave address according to the pull-up resistor value as shown in Table 1. This pin must have a pull-up resistor connected to the same voltage as VDD or tied to GND (pin cannot float). Total capacitance on this pin must be <100 pF. Note: By tying Addr/Therm to ground, the device functions as one address device only. The Therm functionality is then not available. The address for device STTS751-0 is 72h and the address for device STTS751-1 is 76h."
    },
    {
      "number": "5",
      "name": "GND",
      "description": "GND"
    },
    {
      "number": "6",
      "name": "SDA",
      "description": "SMBus data input/output"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/stts751.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97391bfffd9e41956754"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4966K",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "Q2",
      "description": "Speed"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Recommended connection to GND"
    },
    {
      "number": "3",
      "name": "Q1",
      "description": "Direction"
    },
    {
      "number": "4",
      "name": "VS",
      "description": "Supply voltage"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Recommended connection to GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4966K-DataSheet-v01_01-EN.pdf?fileId=db3a30431f848401011fbc945ed46383",
  "version": "1.01"
},
{
  "_id": {
    "$oid": "680f97391bfffd9e41956755"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP234",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "TEST",
      "description": "Test pin"
    },
    {
      "number": "2",
      "name": "CLOCK / VPROG",
      "description": "External clock for communication / programming voltage"
    },
    {
      "number": "3",
      "name": "DATA IN",
      "description": "Serial data input pin"
    },
    {
      "number": "4",
      "name": "DATA OUT",
      "description": "Serial data output pin"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Circuit ground potential"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Analog pressure signal output"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Circuit ground potential"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP234-DS-v01_00-en.pdf?fileId=db3a30432ad629a6012af66bbf030b08",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f97391bfffd9e41956756"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lis25ba",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "I2C_SCL",
      "description": "I2C serial clock - SCL"
    },
    {
      "number": "2",
      "name": "I2C_SDA",
      "description": "I2C serial data - SDA"
    },
    {
      "number": "3",
      "name": "TDM_BCLK",
      "description": "TDM bit clock"
    },
    {
      "number": "4",
      "name": "TDM_WCLK",
      "description": "TDM word clock"
    },
    {
      "number": "5",
      "name": "TDM_SDOUT",
      "description": "TDM serial data output"
    },
    {
      "number": "6",
      "name": "RES (GND)",
      "description": "Reserved pin (connect to GND)"
    },
    {
      "number": "7",
      "name": "TDM_MCLK",
      "description": "TDM master clock"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "RES (VDD)",
      "description": "Reserved pin (connect to VDD)"
    },
    {
      "number": "11",
      "name": "I2C_A0",
      "description": "I2C slave address selection"
    },
    {
      "number": "12",
      "name": "RES (GND)",
      "description": "Reserved pin (connect to GND)"
    },
    {
      "number": "13",
      "name": "RES (GND)",
      "description": "Reserved pin (connect to GND)"
    },
    {
      "number": "14",
      "name": "RES (GND)",
      "description": "Reserved pin (connect to GND)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lis25ba.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97391bfffd9e41956757"
  },
  "flag": "old",
  "manufacturer": "Texas Instruments",
  "name": "ti_TDC1000",
  "pages": "3-4",
  "pins": [
    {
      "number": "11",
      "name": "CHSEL",
      "description": "External channel selection"
    },
    {
      "number": "25",
      "name": "CLKIN",
      "description": "Clock input"
    },
    {
      "number": "7",
      "name": "COMPIN",
      "description": "Echo qualification and zero-crossing detector input"
    },
    {
      "number": "19",
      "name": "CSB",
      "description": "Chip select for the SPI interface (active low)"
    },
    {
      "number": "15",
      "name": "EN",
      "description": "Enable (active high; when low the TDC1000 is in SLEEP mode)"
    },
    {
      "number": "12",
      "name": "ERRB",
      "description": "Error flag (open drain)"
    },
    {
      "number": "26",
      "name": "GND",
      "description": "Negative supply"
    },
    {
      "number": "4",
      "name": "LNAOUT",
      "description": "Low noise amplifier output (for ac decoupling capacitor)"
    },
    {
      "number": "5",
      "name": "PGAIN",
      "description": "Programmable gain amplifier input"
    },
    {
      "number": "6",
      "name": "PGAOUT",
      "description": "Programmable gain amplifier output"
    },
    {
      "number": "17",
      "name": "RESET",
      "description": "Reset (active high)"
    },
    {
      "number": "10",
      "name": "RREF",
      "description": "Reference resistor for temperature measurement"
    },
    {
      "number": "8",
      "name": "RTD1",
      "description": "Resistance temperature detector channel 1"
    },
    {
      "number": "9",
      "name": "RTD2",
      "description": "Resistance temperature detector channel 2"
    },
    {
      "number": "1",
      "name": "RX1",
      "description": "Receive input 1"
    },
    {
      "number": "2",
      "name": "RX2",
      "description": "Receive input 2"
    },
    {
      "number": "18",
      "name": "SCLK",
      "description": "Serial clock for the SPI interface"
    },
    {
      "number": "20",
      "name": "SDI",
      "description": "Serial data input for the SPI interface"
    },
    {
      "number": "21",
      "name": "SDO",
      "description": "Serial data output for the SPI interface"
    },
    {
      "number": "13",
      "name": "START",
      "description": "Start pulse output"
    },
    {
      "number": "14",
      "name": "STOP",
      "description": "Stop pulse output"
    },
    {
      "number": "16",
      "name": "TRIGGER",
      "description": "Trigger input"
    },
    {
      "number": "28",
      "name": "TX1",
      "description": "Transmit output 1"
    },
    {
      "number": "27",
      "name": "TX2",
      "description": "Transmit output 2"
    },
    {
      "number": "3",
      "name": "VCOM",
      "description": "Output common mode voltage bias"
    },
    {
      "number": "23",
      "name": "VDD",
      "description": "Positive supply; all VDD supply pins must be connected to the supply."
    },
    {
      "number": "24",
      "name": "VDD",
      "description": "Positive supply; all VDD supply pins must be connected to the supply."
    },
    {
      "number": "22",
      "name": "VIO",
      "description": "Positive I/O supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.ti.com/lit/ds/symlink/tdc1000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97391bfffd9e41956758"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4965-5M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4965-5M-DataSheet-v01_20-EN.pdf?fileId=5546d462525dbac4015287ede73527d0",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97391bfffd9e4195675a"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lsm6dst",
  "pages": "26",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-wire interface serial data output (SDO), I2C least significant bit of the device address (SA0)"
    },
    {
      "number": "2",
      "name": "SDx",
      "description": "Mode 1: Connect to VDDIO or GND, Mode 2: I2C serial data master (MSDA). Mode 3/4: Auxiliary SPI 3/4-wire interface serial data input (SDI_Aux) and SPI 3-wire serial data output (SDO_Aux)"
    },
    {
      "number": "3",
      "name": "SCx",
      "description": "Mode 1: Connect to VDDIO or GND, Mode 2: I2C serial clock master (MSCL), Mode 3/4: Auxiliary SPI 3-wire interface serial port clock (SPC_Aux)"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt in I2C and SPI"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Mode 1: Programmable interrupt 2 (INT2) / Data enable (DEN), Mode 2: Programmable interrupt 2 (INT2)/ Data enable (DEN)/ I2C master external synchronization signal (MDRDY), Mode 3/4: Programmable interrupt 2 (INT2)/ Data enable (DEN)"
    },
    {
      "number": "10",
      "name": "OCS_Aux",
      "description": "Mode 1: Leave unconnected, Mode 2: Leave unconnected, Mode 3/4: Auxiliary SPI 3/4-wire interface enable"
    },
    {
      "number": "11",
      "name": "SDO_Aux",
      "description": "Mode 1: Connect to VDDIO or leave unconnected, Mode 2: Connect to VDDIO or leave unconnected, Mode 3/4: Auxiliary SPI 3-wire interface: leave unconnected, Auxiliary SPI 4-wire interface: serial data output (SDO_Aux)"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/MIPI I3C/SPI mode\nselection (1: SPI idle mode / I2C/MIPI I3C communication enabled; 0: SPI communication mode / I2C/MIPI I3C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C/MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C/MIPI I3C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lsm6dst.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97391bfffd9e4195675b"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLV4906K",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "Vs",
      "description": "Supply Voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLV4906K-DS-v01_01-en.pdf?fileId=db3a304320d39d590121544295e605cd",
  "version": "1.1"
},
{
  "_id": {
    "$oid": "680f97391bfffd9e4195675c"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL3726DJ",
  "pages": "30",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply Voltage Pin"
    },
    {
      "number": "3",
      "name": "TEST",
      "description": "Test"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "OUT",
      "description": "Push-Pull Output and Programming Pin"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "connect to GND"
    },
    {
      "number": "6",
      "name": "NC",
      "description": "connect to GND"
    },
    {
      "number": "7",
      "name": "NC",
      "description": "connect to GND"
    },
    {
      "number": "8",
      "name": "NC",
      "description": "connect to GND"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/angle/direct-angle/data_sheet/hal371x_hal372x_hal373x_programmable_2d_position_sensors_with_arbitrary_output_function_1dsh_final.pdf",
  "version": "4"
},
{
  "_id": {
    "$oid": "680f97391bfffd9e4195675d"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bme688",
  "pages": "51",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "2",
      "name": "CSB",
      "description": "Chip Select."
    },
    {
      "number": "3",
      "name": "SDI",
      "description": "Serial data input."
    },
    {
      "number": "4",
      "name": "SCK",
      "description": "Serial clock input."
    },
    {
      "number": "5",
      "name": "SDO",
      "description": "Serial data output."
    },
    {
      "number": "6",
      "name": "VDDIO",
      "description": "Digital / Interface supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Analog supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme688-ds000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97391bfffd9e4195675e"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4964-1M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4964-1M-DataSheet-v01_02-EN.pdf?fileId=db3a3043397219b601397256e86f0059",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97391bfffd9e4195675f"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_IAM-20680HT",
  "pages": "17",
  "pins": [
    {
      "number": "1",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage"
    },
    {
      "number": "2",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL); SPI serial clock (SPC)"
    },
    {
      "number": "3",
      "name": "SDA/SDI",
      "description": "I2C serial data (SDA); SPI serial data input (SDI)"
    },
    {
      "number": "4",
      "name": "SA0/SDO",
      "description": "I2C slave address LSB (SA0); SPI serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "CS",
      "description": "Chip select (0 = SPI mode; 1 = I2C mode)"
    },
    {
      "number": "6",
      "name": "INT",
      "description": "Interrupt digital output (push-pull or open-drain)"
    },
    {
      "number": "7",
      "name": "INT2",
      "description": "Second Interrupt digital output (push-pull or open-drain)"
    },
    {
      "number": "8",
      "name": "FSYNC",
      "description": "Synchronization digital input (optional). Connect to GND if unused."
    },
    {
      "number": "9",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "10",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "11",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "12",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "13",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "14",
      "name": "REGOUT",
      "description": "Regulator filter capacitor connection"
    },
    {
      "number": "15",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "16",
      "name": "VDD",
      "description": "Power Supply"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/imu/data_sheet/ds-000481-iam-20680ht-v1.1.pdf",
  "version": "1.1"
},
{
  "_id": {
    "$oid": "680f97391bfffd9e41956760"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "SP490-01-11",
  "pages": "21",
  "pins": [
    {
      "number": "1",
      "name": "PP0/SCL/ A_IN /F_IN",
      "description": "General Purpose IO / I2C-SCL / Analog ADC Input / External Reference Frequency Input"
    },
    {
      "number": "2",
      "name": "PP1/SDA/WAKEUP",
      "description": "General Purpose IO / I2C-SDA / External Wake-Up(*)"
    },
    {
      "number": "3",
      "name": "PP2/SWDCLK/WAKEUP",
      "description": "General Purpose IO / Serial Wire Debug Interface Clock/ External Wake-Up(*)"
    },
    {
      "number": "4",
      "name": "GNDD",
      "description": "Digital Ground"
    },
    {
      "number": "5",
      "name": "PP3 / SWDIO /A_IN",
      "description": "General Purpose IO / Serial Wire Debug Interface Input Output/ Analog ADC Input"
    },
    {
      "number": "6",
      "name": "XIN",
      "description": "Crystal Oscillator Input"
    },
    {
      "number": "7",
      "name": "XOUT",
      "description": "Crystal Oscillator Output"
    },
    {
      "number": "8",
      "name": "LFN",
      "description": "LF Receiver Input"
    },
    {
      "number": "9",
      "name": "LFP",
      "description": "LF Receiver Input"
    },
    {
      "number": "10",
      "name": "VDDREG",
      "description": "Internal Regulated Power Supply"
    },
    {
      "number": "11",
      "name": "GNDA",
      "description": "Analog and Power amplifier Ground"
    },
    {
      "number": "12",
      "name": "PAOUT",
      "description": "RF Power Amplifier Output"
    },
    {
      "number": "13",
      "name": "VDDPA",
      "description": "Regulated Power Supply for RF Power Amplifier"
    },
    {
      "number": "14",
      "name": "VDDBAT",
      "description": "Power Supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-SP490-01-11-DataSheet-v01_20-EN.pdf?fileId=8ac78c8c8929aa4d0189ac2e49461baa",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97391bfffd9e41956761"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE493D-P2B6",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "SCL /INT",
      "description": "Interface serial clock pin (input)\nInterrupt pin, signals a finished measurement cycle, open-drain"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground pin"
    },
    {
      "number": "4",
      "name": "VDD",
      "description": "Supply pin"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "6",
      "name": "SDA",
      "description": "Interface serial data pin (input/output), open-drain"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE493D-P2B6-DataSheet-v01_00-EN.pdf?fileId=5546d46277fc743901785af375274815",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f97391bfffd9e41956762"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1503UA",
  "pages": "15",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_to92_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f97391bfffd9e41956764"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lsm6dsrx",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-wire interface serial data output (SDO), I2C least significant bit of the device address (SA0)"
    },
    {
      "number": "2",
      "name": "SDx",
      "description": "Mode 1: Connect to VDDIO or GND, Mode 2: I2C serial data master (MSDA). Mode 3/4: Auxiliary SPI 3/4-wire interface serial data input (SDI_Aux) and SPI 3-wire serial data output (SDO_Aux)"
    },
    {
      "number": "3",
      "name": "SCx",
      "description": "Mode 1: Connect to VDDIO or GND, Mode 2: I2C serial clock master (MSCL), Mode 3/4: Auxiliary SPI 3-wire interface serial port clock (SPC_Aux)"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt in I2C and SPI"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Mode 1: Programmable interrupt 2 (INT2) / Data enable (DEN), Mode 2: Programmable interrupt 2 (INT2)/ Data enable (DEN)/ I2C master external synchronization signal (MDRDY), Mode 3/4: Programmable interrupt 2 (INT2)/ Data enable (DEN)"
    },
    {
      "number": "10",
      "name": "OCS_Aux",
      "description": "Mode 1: Leave unconnected, Mode 2: Leave unconnected, Mode 3/4: Auxiliary SPI 3/4-wire interface enable"
    },
    {
      "number": "11",
      "name": "SDO_Aux",
      "description": "Mode 1: Connect to VDDIO or leave unconnected, Mode 2: Connect to VDDIO or leave unconnected, Mode 3/4: Auxiliary SPI 3-wire interface: leave unconnected, Auxiliary SPI 4-wire interface: serial data output (SDO_Aux)"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/MIPI I3C/SPI mode\nselection (1: SPI idle mode / I2C/MIPI I3C communication enabled; 0: SPI communication mode / I2C/MIPI I3C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C/MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C/MIPI I3C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lsm6dsrx.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97391bfffd9e41956766"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_imp34dt05",
  "pages": "2",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "2",
      "name": "LR",
      "description": "Left/Right channel selection\n"
    },
    {
      "number": "3",
      "name": "CLK",
      "description": "Synchronization input clock\n"
    },
    {
      "number": "4",
      "name": "DOUT",
      "description": "Left/Right PDM data output"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/imp34dt05.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97391bfffd9e41956767"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_stlm20",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "NC",
      "description": "Not connect"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "VOUT",
      "description": "Output voltage"
    },
    {
      "number": "4",
      "name": "VCC",
      "description": "Supply voltage"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/stlm20.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97391bfffd9e41956768"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_asm330lhb",
  "pages": "8",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-Wire interface serial data output (SDO), I2C less significant bit of the device address (SA0), MIPI I3C least significant bit of the static address (SA0)"
    },
    {
      "number": "2",
      "name": "RES",
      "description": "Connect to Vdd_IO or GND"
    },
    {
      "number": "3",
      "name": "RES",
      "description": "Connect to Vdd_IO or GND"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt in I2C and SPI"
    },
    {
      "number": "5",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "NC",
      "description": "Connect to VDD_IO or GND or leave unconnected"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Programmable interrupt 2 (INT2) / data enabled (DEN)"
    },
    {
      "number": "10",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/MIPI I3C/SPI mode selection (1: SPI idle mode / I2C/MIPI I3C communication enabled; 0: SPI communication mode / I2C/MIPI I3C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C/MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C/MIPI I3C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/asm330lhb.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97391bfffd9e41956769"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lsm6dso16is",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-wire interface serial data output (SDO), I2C least significant bit of the device address (SA0)"
    },
    {
      "number": "2",
      "name": "MSDA",
      "description": "Mode 1: Connect to Vdd_IO or GND, Mode 2: I2C serial data master (MSDA)"
    },
    {
      "number": "3",
      "name": "MSCL",
      "description": "Mode 1: Connect to Vdd_IO or GND, Mode 2: I2C serial clock master (MSCL)"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt 1"
    },
    {
      "number": "5",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Mode 1: Programmable interrupt 2, Mode 2: Programmable interrupt 2 (INT2), I2C master external synchronization signal (MDRDY)"
    },
    {
      "number": "10",
      "name": "RES",
      "description": "Leave unconnected"
    },
    {
      "number": "11",
      "name": "RES",
      "description": "Connect to Vdd_IO or leave unconnected"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lsm6dso16is.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97391bfffd9e4195676a"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4966L",
  "pages": "3",
  "pins": [
    {
      "number": "1",
      "name": "VS",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q1",
      "description": "Direction"
    },
    {
      "number": "3",
      "name": "Q2",
      "description": "Speed"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4966L-DataSheet-v02_10-EN.pdf?fileId=db3a304319c6f18c0119cd85b86f7ad7",
  "version": "2.1"
},
{
  "_id": {
    "$oid": "680f97391bfffd9e4195676b"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_AXO305",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "14",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "15",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "16",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "20",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "25",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "27",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "28",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "26",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "24",
      "name": "MISO",
      "description": "Master Input Slave Output signal"
    },
    {
      "number": "23",
      "name": "MOSI",
      "description": "Master Output Slave Input signal"
    },
    {
      "number": "22",
      "name": "SCLK",
      "description": "SPI clock signal"
    },
    {
      "number": "21",
      "name": "SSB",
      "description": "Slave Selection signal. Active low"
    },
    {
      "number": "19",
      "name": "DRY",
      "description": "Data Ready flag. Generates a pulse when a new acceleration data is available"
    },
    {
      "number": "18",
      "name": "VDDIO",
      "description": "Reference voltage for the SPI signals and DRY, RSTB wires"
    },
    {
      "number": "17",
      "name": "RSTB",
      "description": "Reset. Reloads the internal calibration data. Active low"
    },
    {
      "number": "13",
      "name": "ST",
      "description": "Self-test status high when the sensor is properly operating"
    },
    {
      "number": "4",
      "name": "EN",
      "description": "Enable command. Active high."
    },
    {
      "number": "2",
      "name": "LVREF",
      "description": "External decoupling pad. MUST be connected to the board's GND through a 100µF external capacitor, in order to ensure low noise."
    },
    {
      "number": "3",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    },
    {
      "number": "10",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    },
    {
      "number": "11",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    },
    {
      "number": "12",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/accelero/data_sheet/axo305_datasheet.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97391bfffd9e4195676c"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_mis2dh",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "Res",
      "description": "Connect to GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT_2",
      "description": "Interrupt pin 2"
    },
    {
      "number": "12",
      "name": "INT_1",
      "description": "Interrupt pin 1"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/mis2dh.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97391bfffd9e4195676d"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4964-2K",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4964-2K-DataSheet-v01_20-EN.pdf?fileId=db3a3043397219b60139725a64720065",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97391bfffd9e4195676e"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_ism330bx",
  "pages": "11",
  "pins": [
    {
      "number": "1",
      "name": "SDO/TA0",
      "description": "SPI 4-wire interface serial data output (SDO), I2C least significant bit of the device address (TA0)"
    },
    {
      "number": "2",
      "name": "TDMout",
      "description": "Mode 1: Connect to GND or VDDIO, Mode 2: TDM out"
    },
    {
      "number": "3",
      "name": "BCLK",
      "description": "Mode 1: Connect to GND or VDDIO, Mode 2: TDM bit clock"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt in I2C and SPI"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "AH1/QVAR1",
      "description": "Connect to VDD or GND if the analog hub and Qvar are disabled. AH input 1 (or Qvar electrode 1) is connected if the analog hub (or Qvar functionality) is enabled."
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "AH2/QVAR2",
      "description": "Connect to VDD or GND if the analog hub and Qvar are disabled. AH input 2 (or Qvar electrode 2) is connected if the analog hub (or Qvar functionality) is enabled."
    },
    {
      "number": "10",
      "name": "INT2",
      "description": "Programmable interrupt 2 in I2C and SPI"
    },
    {
      "number": "11",
      "name": "WCLK",
      "description": "Mode 1: Connect to VDDIO or leave unconnected, Mode 2: TDM word clock"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C / MIPI I3C or SPI mode selection (1: SPI idle mode and I2C / MIPI I3C communication\nenabled; 0: SPI communication mode enabled and I2C / MIPI I3C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C / MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C / MIPI I3C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/ism330bx.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e4195676f"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4906-2K",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4906_2K-DS-v01_00-en.pdf?fileId=db3a30432e25b009012e2955d6fb378f",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956770"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4964-3M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4964-3M-DataSheet-v01_20-EN.pdf?fileId=db3a30433cabdd35013cc94b7c0f64f9",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956771"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lps28dfw",
  "pages": "3",
  "pins": [
    {
      "number": "1",
      "name": "SDA",
      "description": "I2C / MIPI I3C serial data (SDA)"
    },
    {
      "number": "2",
      "name": "SA0",
      "description": "I2C least significant bit of the device address (SA0)"
    },
    {
      "number": "3",
      "name": "SCL",
      "description": "I2C / MIPI I3C serial clock (SCL)"
    },
    {
      "number": "4",
      "name": "INT_DRDY",
      "description": "Interrupt or data-ready (INT_DRDY)"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "7",
      "name": "PAD2LID",
      "description": "Pad connection to metal lid"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lps28dfw.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956773"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_ais25ba",
  "pages": "2",
  "pins": [
    {
      "number": "1",
      "name": "I2C_SCL",
      "description": "I2C serial clock - SCL"
    },
    {
      "number": "2",
      "name": "I2C_SDA",
      "description": "I2C serial data - SDA"
    },
    {
      "number": "3",
      "name": "TDM_BCLK",
      "description": "TDM bit clock"
    },
    {
      "number": "4",
      "name": "TDM_WCLK",
      "description": "TDM word clock"
    },
    {
      "number": "5",
      "name": "TDM_SDOUT",
      "description": "TDM serial data output"
    },
    {
      "number": "6",
      "name": "RES (GND)",
      "description": "Reserved pin (connect to GND)"
    },
    {
      "number": "7",
      "name": "TDM_MCLK",
      "description": "TDM master clock"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "RES (VDD)",
      "description": "Reserved pin (connect to VDD)"
    },
    {
      "number": "11",
      "name": "I2C_A0",
      "description": "I2C slave address selection"
    },
    {
      "number": "12",
      "name": "RES (GND)",
      "description": "Reserved pin (connect to GND)"
    },
    {
      "number": "13",
      "name": "RES (GND)",
      "description": "Reserved pin (connect to GND)"
    },
    {
      "number": "14",
      "name": "RES (GND)",
      "description": "Reserved pin (connect to GND)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/ais25ba.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956774"
  },
  "flag": "old",
  "manufacturer": "Texas Instruments",
  "name": "ti_FDC2214",
  "pages": "4-5",
  "pins": [
    {
      "number": "1",
      "name": "SCL",
      "description": "I2C Clock input"
    },
    {
      "number": "2",
      "name": "SDA",
      "description": "I2C Data input/output"
    },
    {
      "number": "3",
      "name": "CLKIN",
      "description": "Master Clock input. Tie this pin to GND if internal oscillator is selected"
    },
    {
      "number": "4",
      "name": "ADDR",
      "description": "I2C Address selection pin: when ADDR=L, I2C address = 0x2A, when ADDR=H, I2C address = 0x2B."
    },
    {
      "number": "5",
      "name": "INTB",
      "description": "Configurable Interrupt output pin"
    },
    {
      "number": "6",
      "name": "SD",
      "description": "Shutdown input"
    },
    {
      "number": "7",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "9",
      "name": "IN0A",
      "description": "Capacitive sensor input 0"
    },
    {
      "number": "10",
      "name": "IN0B",
      "description": "Capacitive sensor input 0"
    },
    {
      "number": "11",
      "name": "IN1A",
      "description": "Capacitive sensor input 1"
    },
    {
      "number": "12",
      "name": "IN1B",
      "description": "Capacitive sensor input 1"
    },
    {
      "number": "13",
      "name": "IN2A",
      "description": "Capacitive sensor input 2 (FDC2114 / FDC2214 only)"
    },
    {
      "number": "14",
      "name": "IN2B",
      "description": "Capacitive sensor input 2 (FDC2114 / FDC2214 only)"
    },
    {
      "number": "15",
      "name": "IN3A",
      "description": "Capacitive sensor input 3 (FDC2114 / FDC2214 only)"
    },
    {
      "number": "16",
      "name": "IN3B",
      "description": "Capacitive sensor input 3 (FDC2114 / FDC2214 only)"
    },
    {
      "number": "DAP",
      "name": "DAP",
      "description": "Connect to Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.ti.com/lit/ds/symlink/fdc2214.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956775"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lsm303agr",
  "pages": "12",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS_XL",
      "description": "Accelerometer: SPI enable, I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "CS_MAG",
      "description": "Magnetometer: SPI enable, I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "C1",
      "description": "Capacitor connection (C1 = 220 nF)"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Connected to GND"
    },
    {
      "number": "7",
      "name": "INT_MAG/DRDY",
      "description": "Magnetometer interrupt/data-ready signal"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT_2_XL",
      "description": "Accelerometer interrupt 2"
    },
    {
      "number": "12",
      "name": "INT_1_XL",
      "description": "Accelerometer interrupt 1"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lsm303agr.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956776"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bmi263",
  "pages": "2",
  "pins": [
    {
      "number": "1",
      "name": "SDO",
      "description": "Serial data output in SPI 4-Wire"
    },
    {
      "number": "2",
      "name": "ASDX",
      "description": "Aux interface / OIS interface"
    },
    {
      "number": "3",
      "name": "ASCX",
      "description": "Aux interface / OIS interface"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Interrupt pin 1"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage (1.2V ...3.6V)"
    },
    {
      "number": "6",
      "name": "GNDIO",
      "description": "Ground for I/O"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground for digital & analog"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply analog & digital domain (1.71 - 3.6V)"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Interrupt pin 2"
    },
    {
      "number": "10",
      "name": "OCSB",
      "description": "OIS interface"
    },
    {
      "number": "11",
      "name": "OSDO",
      "description": "OIS interface"
    },
    {
      "number": "12",
      "name": "CSB",
      "description": "Chip select for SPI mode"
    },
    {
      "number": "13",
      "name": "SCX",
      "description": "SPI/I2C serial clock (SCK/SCL)"
    },
    {
      "number": "14",
      "name": "SDX",
      "description": "Serial data I/O"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/product_flyer/bst-bmi263-fl000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956777"
  },
  "flag": "old",
  "manufacturer": "Texas Instruments",
  "name": "CDCE913",
  "pages": "3",
  "pins": [
    {
      "number": "5, 10",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "12",
      "name": "SCL/S2",
      "description": "SCL: serial clock input LVCMOS (default configuration), internal pullup 500 kΩ or\nS2: user-programmable control input; LVCMOS inputs; 500-kΩ internal pullup"
    },
    {
      "number": "13",
      "name": "SDA/S1",
      "description": "SDA: bidirectional serial data input/output (default configuration), LVCMOS internal pullup; or\nS1: user-programmable control input; LVCMOS inputs; 500-kΩ internal pullup"
    },
    {
      "number": "2",
      "name": "S0",
      "description": "User-programmable control input S0; LVCMOS inputs; 500-kΩ internal pullup"
    },
    {
      "number": "4",
      "name": "VCtrl",
      "description": "VCXO control voltage (leave open or pull up when not used)"
    },
    {
      "number": "3",
      "name": "VDD",
      "description": "1.8-V power supply for the device"
    },
    {
      "number": "6, 7",
      "name": "VDDOUT",
      "description": "CDCE913: 3.3-V or 2.5-V supply for all outputs \nCDCEL913: 1.8-V supply for all outputs"
    },
    {
      "number": "1",
      "name": "Xin/CLK",
      "description": "Crystal oscillator input or LVCMOS clock Input (selectable through SDA/SCL bus)"
    },
    {
      "number": "14",
      "name": "Xout",
      "description": "Crystal oscillator output (leave open or pull up when not used)"
    },
    {
      "number": "11",
      "name": "Y1",
      "description": "LVCMOS outputs"
    },
    {
      "number": "9",
      "name": "Y2",
      "description": "LVCMOS outputs"
    },
    {
      "number": "8",
      "name": "Y3",
      "description": "LVCMOS outputs"
    }
  ],
  "type": "sensor",
  "url": "https://www.ti.com/lit/ds/symlink/cdce913.pdf?ts=1727676669944&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FCDCE913",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956778"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAR2455",
  "pages": "-1",
  "pins": [
    {
      "number": "2",
      "name": "VSUP1",
      "description": "Supply Voltage die 1"
    },
    {
      "number": "3",
      "name": "GND1",
      "description": "Ground die 1"
    },
    {
      "number": "4",
      "name": "GNDePad",
      "description": "Ground ePad"
    },
    {
      "number": "6",
      "name": "OUT1",
      "description": "PWM Output and Programming Pin Die 1"
    },
    {
      "number": "9",
      "name": "VSUP2",
      "description": "Supply Voltage die 2"
    },
    {
      "number": "11",
      "name": "GNDePad",
      "description": "Ground ePad"
    },
    {
      "number": "12",
      "name": "GND2",
      "description": "Ground die 2"
    },
    {
      "number": "13",
      "name": "OUT2",
      "description": "PWM Output and Programming Pin Die 2"
    },
    {
      "number": "1",
      "name": "GND1",
      "description": "Ground die 1"
    },
    {
      "number": "5",
      "name": "GND1",
      "description": "Ground die 1"
    },
    {
      "number": "7",
      "name": "GND1",
      "description": "Ground die 1"
    },
    {
      "number": "8",
      "name": "GND2",
      "description": "Ground die 2"
    },
    {
      "number": "10",
      "name": "GND2",
      "description": "Ground die 2"
    },
    {
      "number": "14",
      "name": "GND2",
      "description": "Ground die 2"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/current/magnetic-current/data_sheet/hal_2455_high-precision_programmable_linear_hall-effect_sensor_with_pwm_output.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956779"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE5014SP16",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "IF1",
      "description": "DATA (MOSI/MISO)"
    },
    {
      "number": "2",
      "name": "IF2",
      "description": "SCK (SSC clock)"
    },
    {
      "number": "3",
      "name": "IF3",
      "description": "CSQ (chip select)"
    },
    {
      "number": "4",
      "name": "VDD",
      "description": "Supply voltage, positive"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Supply voltage, ground"
    },
    {
      "number": "6",
      "name": "IFA",
      "description": "Connect to GND"
    },
    {
      "number": "7",
      "name": "IFB",
      "description": "Connect via pull-up to VDD"
    },
    {
      "number": "8",
      "name": "IFC",
      "description": "Keep open"
    },
    {
      "number": "9-16",
      "name": "-",
      "description": "n.c."
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE5014SP16%20E0001-DataSheet-v01_01-EN.pdf?fileId=5546d4626eab8fbf016ed1116a022ad0",
  "version": "1.1"
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e4195677a"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP229E3518",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "TEST",
      "description": "Test pin"
    },
    {
      "number": "2",
      "name": "CLOCK / VPROG",
      "description": "External clock for communication / programming voltage"
    },
    {
      "number": "3",
      "name": "DATA IN",
      "description": "Serial data input pin"
    },
    {
      "number": "4",
      "name": "DATA OUT",
      "description": "Serial data output pin"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Circuit ground potential"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Analog pressure signal output"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Circuit ground potential"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP229E3518-DS-v01_00-en.pdf?fileId=db3a30432c59a87e012c5a5ff4a10006",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e4195677b"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1503SU",
  "pages": "14",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_sot23_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e4195677c"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bmp581",
  "pages": "46",
  "pins": [
    {
      "number": "1",
      "name": "VDDIO",
      "description": "Digital interface supply"
    },
    {
      "number": "2",
      "name": "SCK",
      "description": "Serial clock input"
    },
    {
      "number": "3",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "SDI",
      "description": "Serial data input."
    },
    {
      "number": "5",
      "name": "SDO",
      "description": "Serial data output."
    },
    {
      "number": "6",
      "name": "CSB",
      "description": "Chip select"
    },
    {
      "number": "7",
      "name": "INT",
      "description": "INT output"
    },
    {
      "number": "8",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "9",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "10",
      "name": "VDD",
      "description": "Analog supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp581-ds004.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e4195677d"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_ilps28qsw",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "SDA",
      "description": "I2C / MIPI I3C serial data (SDA)"
    },
    {
      "number": "2",
      "name": "AH1/QVAR1",
      "description": "Connect to GND if analog input / Qvar sensing is not needed."
    },
    {
      "number": "3",
      "name": "SCL",
      "description": "I2C / MIPI I3C serial clock (SCL)"
    },
    {
      "number": "4",
      "name": "AH2/QVAR2",
      "description": "Connect to GND if analog input / Qvar sensing is not needed."
    },
    {
      "number": "5",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "7",
      "name": "PAD2LID",
      "description": "Pad connection to metal lid"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/ilps28qsw.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e4195677e"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lsm6dsm",
  "pages": "-1",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-wire interface serial data output (SDO), I2C least significant bit of the device address (SA0)"
    },
    {
      "number": "2",
      "name": "SDx",
      "description": "Mode 1: Connect to VDDIO or GND, Mode 2: I2C serial data master (MSDA). Mode 3/4: Auxiliary SPI 3/4-wire interface serial data input (SDI) and SPI 3-wire serial data output (SDO)"
    },
    {
      "number": "3",
      "name": "SCx",
      "description": "Mode 1: Connect to VDDIO or GND, Mode 2: I2C serial clock master (MSCL), Mode 3/4: Auxiliary SPI 3-wire interface serial port clock (SPC_Aux)"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt 1"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Mode 1: Programmable interrupt 2 (INT2) / Data enable (DEN), Mode 2: Programmable interrupt 2 (INT2)/ Data enable (DEN)/ I2C master external synchronization signal (MDRDY), Mode 3: Programmable interrupt 2 (INT2)/ Data enable (DEN)"
    },
    {
      "number": "10",
      "name": "OCS_Aux",
      "description": "Mode 1: Leave unconnected, Mode 2: Leave unconnected, Mode 3/4: Auxiliary SPI 3/4-wire interface enable"
    },
    {
      "number": "11",
      "name": "SDO_Aux",
      "description": "Mode 1: Connect to VDDIO or leave unconnected, Mode 2: Connect to VDDIO or leave unconnected, Mode 3/4: Auxiliary SPI 3-wire interface: leave unconnected, Auxiliary SPI 4-wire interface: serial data output (SDO_Aux)"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lsm6dsm.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e4195677f"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lsm6dsl",
  "pages": "20",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-wire interface serial data output (SDO), I2C least significant bit of the device address (SA0)"
    },
    {
      "number": "2",
      "name": "MSDA",
      "description": "Mode 1: Connect to Vdd_IO or GND, Mode 2: I2C serial data master (MSDA)"
    },
    {
      "number": "3",
      "name": "MSCL",
      "description": "Mode 1: Connect to Vdd_IO or GND, Mode 2: I2C serial clock master (MSCL)"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt 1"
    },
    {
      "number": "5",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Mode 1: Programmable interrupt 2, Mode 2: Programmable interrupt 2 (INT2), I2C master external synchronization signal (MDRDY)"
    },
    {
      "number": "10",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lsm6dsl.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956780"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP276A1201",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "NCS",
      "description": "Not-Chip-Select (active-low)"
    },
    {
      "number": "2",
      "name": "CLK",
      "description": "Serial Clock"
    },
    {
      "number": "3",
      "name": "SDI",
      "description": "Serial Data In"
    },
    {
      "number": "4",
      "name": "SDO",
      "description": "Serial Data Out"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "SENTOUT",
      "description": "SENT output"
    },
    {
      "number": "7",
      "name": "NTCIN",
      "description": "NTC Input"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP276A1201-DataSheet-v01_02-EN.pdf?fileId=5546d4626afcd350016b03daec5d7175",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956781"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4966-3K",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "Q2",
      "description": "Speed"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Recommended connection to GND"
    },
    {
      "number": "3",
      "name": "Q1",
      "description": "Direction"
    },
    {
      "number": "4",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Recommended connection to GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4966_3K-DS-v01_00-en.pdf?fileId=db3a30432b57a660012ba0adf1880bb7",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956782"
  },
  "flag": "old",
  "manufacturer": "Texas Instruments",
  "name": "ti_FDC1004",
  "pages": "3",
  "pins": [
    {
      "number": "1",
      "name": "SHLD1",
      "description": "Capacitive Input Active AC Shielding."
    },
    {
      "number": "2",
      "name": "CIN1",
      "description": "Capacitive Input. The measured capacitance is connected between the CIN1 pin and GND. If not used, this pin should be left as an open circuit."
    },
    {
      "number": "3",
      "name": "CIN2",
      "description": "Capacitive Input. The measured capacitance is connected between the CIN2 pin and GND. If not used, this pin should be left as an open circuit."
    },
    {
      "number": "4",
      "name": "CIN3",
      "description": "Capacitive Input. The measured capacitance is connected between the CIN3 pin and GND. If not used, this pin should be left as an open circuit."
    },
    {
      "number": "5",
      "name": "CIN4",
      "description": "Capacitive Input. The measured capacitance is connected between the CIN4 pin and GND. If not used, this pin should be left as an open circuit."
    },
    {
      "number": "6",
      "name": "SHLD2",
      "description": "Capacitive Input Active AC Shielding."
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power Supply Voltage. This pin should be decoupled to GND, using a low impedance capacitor, for example in combination with a 1-µF tantalum and a 0.1-µF multilayer ceramic."
    },
    {
      "number": "9",
      "name": "SCL",
      "description": "Serial Interface Clock Input. Connects to the master clock line. Requires pull-up resistor if not already provided elsewhere in the system."
    },
    {
      "number": "10",
      "name": "SDA",
      "description": "Serial Interface Bidirectional Data. Connects to the master data line. Requires a pull-up resistor if not provided elsewhere in the system."
    },
    {
      "number": "-",
      "name": "DAP",
      "description": "Connect to GND"
    }
  ],
  "type": "sensor",
  "url": "https://www.ti.com/lit/ds/symlink/fdc1004.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956783"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE5012B",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "IFC (CLK / IIF_IDX / HS3)",
      "description": "Interface C:\nExternal Clock1) / IIF Index / Hall Switch Signal 3"
    },
    {
      "number": "2",
      "name": "SCK",
      "description": "SSC Clock"
    },
    {
      "number": "3",
      "name": "CSQ",
      "description": "SSC Chip Select"
    },
    {
      "number": "4",
      "name": "DATA",
      "description": "SSC Data"
    },
    {
      "number": "5",
      "name": "IFA (IIF_A / HS1 / PWM / SPC)",
      "description": "Interface A:\nIIF Phase A / Hall Switch Signal 1 /\nPWM / SPC output (input for SPC trigger only)"
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Supply Voltage"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "8",
      "name": "IFB (IIF_B / HS2)",
      "description": "Interface B:\nIIF Phase B / Hall Switch Signal 2"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE5012B_Exxxx-DataSheet-v02_01-EN.pdf?fileId=db3a304334fac4c601350f31c43c433f",
  "version": "2.1"
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956784"
  },
  "flag": "old",
  "manufacturer": "Texas Instruments",
  "name": "LMX2594",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "CE",
      "description": "Chip enable input. Active HIGH powers on the device."
    },
    {
      "number": "2, 4, 25, 31, 34, 39, 40",
      "name": "GND",
      "description": "VCO ground."
    },
    {
      "number": "3",
      "name": "VbiasVCO",
      "description": "VCO bias. Requires a 10-μF capacitor connected to VCO ground. Place close to pin."
    },
    {
      "number": "5",
      "name": "SYNC",
      "description": "Phase synchronization pin. Has programmable threshold."
    },
    {
      "number": "6, 14",
      "name": "GND",
      "description": "Digital ground."
    },
    {
      "number": "7",
      "name": "VccDIG",
      "description": "Digital supply. TI recommends bypassing with decoupling capacitor to digital ground."
    },
    {
      "number": "8",
      "name": "OSCinP",
      "description": "Reference input clock (+). High-impedance self-biasing pin. Requires AC-coupling capacitor. (0.1 μF recommended)"
    },
    {
      "number": "9",
      "name": "OSCinM",
      "description": "Reference input clock (–). High impedance self-biasing pin. Requires AC-coupling capacitor. (0.1 μF recommended)"
    },
    {
      "number": "10",
      "name": "VregIN",
      "description": "Input reference path regulator output. Requires a 1-μF capacitor connected to ground. Place close to pin."
    },
    {
      "number": "11",
      "name": "VccCP",
      "description": "Charge pump supply. TI recommends bypassing with decoupling capacitor to charge pump ground."
    },
    {
      "number": "12",
      "name": "CPout",
      "description": "Charge pump output. TI recommends connecting C1 of loop filter close to pin."
    },
    {
      "number": "13",
      "name": "GND",
      "description": "Charge pump ground."
    },
    {
      "number": "15",
      "name": "VccMASH",
      "description": "Digital supply. TI recommends bypassing with decoupling capacitor to digital ground."
    },
    {
      "number": "16",
      "name": "SCK",
      "description": "SPI clock. High impedance CMOS input. 1.8-V to 3.3-V logic."
    },
    {
      "number": "17",
      "name": "SDI",
      "description": "SPI data. High impedance CMOS input. 1.8-V to 3.3-V logic."
    },
    {
      "number": "18",
      "name": "RFoutBM",
      "description": "Differential output B (–). Requires a pullup (typically 50-Ω resistor) connected to Vcc as close to the pin as possible. Can be used as an output signal or SYSREF output."
    },
    {
      "number": "19",
      "name": "RFoutBP",
      "description": "Differential output B (+). Requires a pullup (typically 50-Ω resistor) connected to Vcc as close to the pin as possible. Can be used as an output signal or SYSREF output."
    },
    {
      "number": "20",
      "name": "MUXout",
      "description": "Multiplexed output pin — lock detect, readback, diagnostics, ramp status."
    },
    {
      "number": "21",
      "name": "VccBUF",
      "description": "Output buffer supply. TI recommends bypassing with decoupling capacitor to RFout ground."
    },
    {
      "number": "22",
      "name": "RFoutAM",
      "description": "Differential output A (–). Requires connecting a 50-Ω resistor pullup to Vcc as close to the pin as possible."
    },
    {
      "number": "23",
      "name": "RFoutAP",
      "description": "Differential output A (+). Requires connecting a 50-Ω resistor pullup to Vcc as close to the pin as possible."
    },
    {
      "number": "24",
      "name": "CSB",
      "description": "SPI latch. Chip Select Bar. High-impedance CMOS input. 1.8-V to 3.3-V logic."
    },
    {
      "number": "26",
      "name": "VccVCO2",
      "description": "VCO supply. TI recommends bypassing with decoupling capacitor to VCO ground."
    },
    {
      "number": "27",
      "name": "VbiasVCO2",
      "description": "VCO bias. Requires a 1-μF capacitor connected to VCO ground."
    },
    {
      "number": "28",
      "name": "SysRefReq",
      "description": "SYSREF request input for JESD204B support."
    },
    {
      "number": "29",
      "name": "VrefVCO2",
      "description": "VCO supply reference. Requires a 10-μF capacitor connected to VCO ground."
    },
    {
      "number": "30",
      "name": "RampClk",
      "description": "Input pin for ramping mode that can be used to clock the ramp in manual ramping mode or as a trigger input."
    },
    {
      "number": "32",
      "name": "RampDir",
      "description": "Input pin for ramping mode that can be used to change ramp direction in manual ramping mode or as a trigger input."
    },
    {
      "number": "33",
      "name": "VbiasVARAC",
      "description": "VCO Varactor bias. Requires a 10-μF capacitor connected to VCO ground."
    },
    {
      "number": "35",
      "name": "Vtune",
      "description": "VCO tuning voltage input."
    },
    {
      "number": "36",
      "name": "VrefVCO",
      "description": "VCO supply reference. Requires a 10-μF capacitor connected to VCO ground."
    },
    {
      "number": "37",
      "name": "VccVCO",
      "description": "VCO supply. Recommend bypassing with decoupling capacitor to ground."
    },
    {
      "number": "38",
      "name": "VregVCO",
      "description": "VCO regulator node. Requires a 1-μF capacitor connected to ground."
    },
    {
      "number": "DAP",
      "name": "GND",
      "description": "Die Attached Pad. Used for RFout ground."
    }
  ],
  "type": "sensor",
  "url": "https://www.ti.com/lit/ds/symlink/lmx2594.pdf?ts=1727692248446&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FLMX2594%253Futm_source%253Dgoogle%2526utm_medium%253Dcpc%2526utm_campaign%253Dasc-null-null-gpn_en-cpc-pf-google-eu%2526utm_content%253Dlmx2594%2526ds_k%253DLMX2594%2526dcm%253Dyes%2526gad_source%253D1%2526gbraid%253D0AAAAAC068F1AvDpl7nxIrsctBA1c6pb5G%2526gclid%253DCj0KCQjwmOm3BhC8ARIsAOSbapXu7B5Qo6ftzZ1JpNqR66eFnBSGs9ECoRF7vuIxqy27ZEoQYv2VqbUaAhKYEALw_wcB%2526gclsrc%253Daw.ds",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956785"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_ICM-40609-D",
  "pages": "18",
  "pins": [
    {
      "number": "8",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage"
    },
    {
      "number": "9",
      "name": "AD0 / SDO",
      "description": "AD0: I2C Slave Address LSB\nSDO: SPI serial data output (4-wire mode)"
    },
    {
      "number": "11",
      "name": "RESV",
      "description": "RESV: Connect to GND"
    },
    {
      "number": "12",
      "name": "INT1 / INT",
      "description": "INT1: Interrupt 1\nINT: Interrupt if all interrupts mapped to pin 12"
    },
    {
      "number": "13",
      "name": "VDD",
      "description": "Power supply voltage"
    },
    {
      "number": "18",
      "name": "GND",
      "description": "Power supply ground"
    },
    {
      "number": "19",
      "name": "INT2 / FSYNC",
      "description": "INT2: Interrupt 2\nFSYNC: Frame sync input; Connect to GND if FSYNC selected but\nFSYNC signal not input"
    },
    {
      "number": "20",
      "name": "RESV",
      "description": "Reserved, connect to GND"
    },
    {
      "number": "22",
      "name": "nCS",
      "description": "Chip select (SPI mode only)"
    },
    {
      "number": "23",
      "name": "SCL / SCLK",
      "description": "SCL: I2C serial clock\nSCLK: SPI serial clock"
    },
    {
      "number": "24",
      "name": "SDA / SDI / SDIO",
      "description": "SDA: I2C serial data\nSDI: SPI serial data input (4-wire mode)\nSDIO: SPI serial data I/O (3-wire mode)"
    },
    {
      "number": "1",
      "name": "NC",
      "description": "No Connect pins. Do not connect"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "No Connect pins. Do not connect"
    },
    {
      "number": "3",
      "name": "NC",
      "description": "No Connect pins. Do not connect"
    },
    {
      "number": "4",
      "name": "NC",
      "description": "No Connect pins. Do not connect"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "No Connect pins. Do not connect"
    },
    {
      "number": "6",
      "name": "NC",
      "description": "No Connect pins. Do not connect"
    },
    {
      "number": "7",
      "name": "NC",
      "description": "No Connect pins. Do not connect"
    },
    {
      "number": "10",
      "name": "NC",
      "description": "No Connect pins. Do not connect"
    },
    {
      "number": "14",
      "name": "NC",
      "description": "No Connect pins. Do not connect"
    },
    {
      "number": "15",
      "name": "NC",
      "description": "No Connect pins. Do not connect"
    },
    {
      "number": "16",
      "name": "NC",
      "description": "No Connect pins. Do not connect"
    },
    {
      "number": "17",
      "name": "NC",
      "description": "No Connect pins. Do not connect"
    },
    {
      "number": "21",
      "name": "NC",
      "description": "No Connect pins. Do not connect"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/imu/data_sheet/ds-000330_icm-40609-d_v1.2.pdf",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956786"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lsm6ds3tr-c",
  "pages": "20",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-wire interface serial data output (SDO), I2C least significant bit of the device address (SA0)"
    },
    {
      "number": "2",
      "name": "MSDA",
      "description": "Mode 1: Connect to Vdd_IO or GND, Mode 2: I2C serial data master (MSDA)"
    },
    {
      "number": "3",
      "name": "MSCL",
      "description": "Mode 1: Connect to Vdd_IO or GND, Mode 2: I2C serial clock master (MSCL)"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt 1"
    },
    {
      "number": "5",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Mode 1: Programmable interrupt 2, Mode 2: Programmable interrupt 2 (INT2), I2C master external synchronization signal (MDRDY)"
    },
    {
      "number": "10",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lsm6ds3tr-c.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956787"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLV4964-1M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLV4964-1M-DataSheet-v01_20-EN.pdf?fileId=5546d46268554f4a016874ee71c53f37",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956788"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLI4965-5M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLI4965-5M-DataSheet-v01_20-EN.pdf?fileId=5546d462525dbac4015287edf0c127d3",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956789"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_mp34dt05-a",
  "pages": "2",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "2",
      "name": "LR",
      "description": "Left/Right channel selection\n"
    },
    {
      "number": "3",
      "name": "CLK",
      "description": "Synchronization input clock\n"
    },
    {
      "number": "4",
      "name": "DOUT",
      "description": "Left/Right PDM data output"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/mp34dt05-a.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e4195678a"
  },
  "flag": "old",
  "manufacturer": "Murata",
  "name": "SCR2100",
  "pages": "8",
  "pins": [
    {
      "number": "1, 12, 13, 24",
      "name": "HEAT",
      "description": "Heat sink connection, connect externally to AVSS"
    },
    {
      "number": "2, 11",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    },
    {
      "number": "3",
      "name": "EXTRESN",
      "description": "External Reset, 3.3V logic compatible Schmitt-trigger input with internal\npull-up, LOW-HIGH transition causes system restart. Minimum low time\n100us"
    },
    {
      "number": "4",
      "name": "SCK",
      "description": "CLK signal of SPI interface"
    },
    {
      "number": "5",
      "name": "MISO",
      "description": "Data Out of SPI Interface"
    },
    {
      "number": "6",
      "name": "VBOOST",
      "description": "External capacitor connection for high voltage analog supply,\nhigh voltage pad ≈30V"
    },
    {
      "number": "7",
      "name": "LBOOST",
      "description": "Connection for inductor for high voltage generation,\nhigh voltage pad ≈30V"
    },
    {
      "number": "8",
      "name": "DVSS",
      "description": "Digital Supply Return, connect externally to AVSS"
    },
    {
      "number": "9",
      "name": "DVDD",
      "description": "Digital Supply Voltage"
    },
    {
      "number": "10",
      "name": "D_EXTC",
      "description": "External capacitor connection for digital core ( typ. 1.8V)"
    },
    {
      "number": "11",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    },
    {
      "number": "14",
      "name": "AVDD",
      "description": "Analog Supply voltage"
    },
    {
      "number": "15",
      "name": "A_EXTC",
      "description": "External capacitor connection for positive reference voltage"
    },
    {
      "number": "16",
      "name": "AVSS_REF",
      "description": "Analog reference ground, connect externally to AVSS"
    },
    {
      "number": "17",
      "name": "AVSS",
      "description": "Analog Supply Return, connect externally to DVSS"
    },
    {
      "number": "18",
      "name": "CSB",
      "description": "Chip Select of SPI Interface, 3.3V logic compatible Schmitt-trigger input"
    },
    {
      "number": "19",
      "name": "MOSI",
      "description": "Data In of SPI Interface, 3.3V logic compatible Schmitt-trigger input"
    },
    {
      "number": "20",
      "name": "RESERVED",
      "description": "Factory use only, leave floating or connect to GND"
    },
    {
      "number": "21",
      "name": "RESERVED",
      "description": "Factory use only, leave floating or connect to GND"
    },
    {
      "number": "22",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    },
    {
      "number": "23",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    }
  ],
  "type": "sensor",
  "url": "https://www.murata.com/-/media/webrenewal/products/sensor/pdf/datasheet/scr-2100_datasheet.ashx?&la=en-gb&cvid=20210208012409000000",
  "version": "D08"
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e4195678b"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP254",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "NCS",
      "description": "Not-Chip-Select (active-low)"
    },
    {
      "number": "2",
      "name": "CLK",
      "description": "Serial Clock"
    },
    {
      "number": "3",
      "name": "SDI",
      "description": "Serial Data In"
    },
    {
      "number": "4",
      "name": "SDO",
      "description": "Serial Data Out"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "VPROG",
      "description": "Programming Voltage"
    },
    {
      "number": "7",
      "name": "NC",
      "description": "Not Connected"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP254-DS-v01_01-EN.pdf?fileId=5546d46254e133b401557355b9a5643b",
  "version": "1.1"
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e4195678c"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1501SU",
  "pages": "14",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_sot23_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e4195678d"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP226-IG E3411",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "TEST",
      "description": "Test pin"
    },
    {
      "number": "2",
      "name": "CLOCK / VPROG",
      "description": "External clock for communication / programming\nvoltage1)"
    },
    {
      "number": "3",
      "name": "DATA IN",
      "description": "Serial data input pin"
    },
    {
      "number": "4",
      "name": "DATA OUT",
      "description": "Serial data output pin"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Circuit ground potential"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Analog pressure signal output"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Circuit ground potential"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP226-IG%20E3411-DataSheet-v01_01-EN.pdf?fileId=5546d4626c1f3dc3016c6226dc93182c",
  "version": "1.1"
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e4195678e"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bmo055",
  "pages": "106",
  "pins": [
    {
      "number": "1",
      "name": "PIN1",
      "description": "Do not connect"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "VDD",
      "description": "Supply"
    },
    {
      "number": "4",
      "name": "nBOOT_LOAD_PIN",
      "description": "Bootloader mode select pin (active low)"
    },
    {
      "number": "5",
      "name": "PS1",
      "description": "Protocol select pin 1"
    },
    {
      "number": "6",
      "name": "PS0",
      "description": "Protocol select pin 2"
    },
    {
      "number": "7",
      "name": "SWDIO",
      "description": "Debugger interface"
    },
    {
      "number": "8",
      "name": "SWCLK",
      "description": "Debugger interface"
    },
    {
      "number": "9",
      "name": "CAP",
      "description": "External capacitor"
    },
    {
      "number": "10",
      "name": "BL_IND",
      "description": "Bootloader indicator"
    },
    {
      "number": "11",
      "name": "nRESET",
      "description": "Reset pin (active low)"
    },
    {
      "number": "12",
      "name": "PIN12",
      "description": "Do not connect"
    },
    {
      "number": "13",
      "name": "PIN13",
      "description": "Do not connect"
    },
    {
      "number": "14",
      "name": "INT",
      "description": "Interrupt output"
    },
    {
      "number": "15",
      "name": "PIN15",
      "description": "Do not connect"
    },
    {
      "number": "16",
      "name": "PIN16",
      "description": "Do not connect"
    },
    {
      "number": "17",
      "name": "COM3",
      "description": "Digital interface pin 3"
    },
    {
      "number": "18",
      "name": "COM2",
      "description": "Digital interface pin 2"
    },
    {
      "number": "19",
      "name": "COM1",
      "description": "Digital interface pin 1"
    },
    {
      "number": "20",
      "name": "COM0",
      "description": "Digital interface pin 0"
    },
    {
      "number": "21",
      "name": "PIN21",
      "description": "Do not connect"
    },
    {
      "number": "22",
      "name": "PIN22",
      "description": "Do not connect"
    },
    {
      "number": "23",
      "name": "PIN23",
      "description": "Do not connect"
    },
    {
      "number": "24",
      "name": "PIN24",
      "description": "Do not connect"
    },
    {
      "number": "25",
      "name": "GNDIO",
      "description": "Ground for I/O"
    },
    {
      "number": "26",
      "name": "XOUT32",
      "description": "Optional OSC port"
    },
    {
      "number": "27",
      "name": "XIN32",
      "description": "Optional OSC port"
    },
    {
      "number": "28",
      "name": "VDDIO",
      "description": "Supply for I/O"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bno055-ds000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e4195678f"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1562SU",
  "pages": "13",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply and output"
    },
    {
      "number": "2",
      "name": "AUX",
      "description": "Functional test pin, connection to ground is recommended"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_156y_hall-effect_switches_with_current_interface_2-wire_in_sot23_package.pdf",
  "version": "4"
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956790"
  },
  "flag": "old",
  "manufacturer": "Texas Instruments",
  "name": "AFE4490",
  "pages": "7",
  "pins": [
    {
      "number": "28",
      "name": "ADC_RDY",
      "description": "Output signal that indicates ADC conversion completion.\nCan be connected to the interrupt input pin of an external microcontroller.\nCan be connected to the interrupt input pin of an external microcontroller."
    },
    {
      "number": "20",
      "name": "AFE_PDN",
      "description": "AFE-only power-down input; active low.\nCan be connected to the port pin of an external microcontroller."
    },
    {
      "number": "7",
      "name": "BG",
      "description": "Decoupling capacitor for internal band-gap voltage to ground (2.2-μF decoupling capacitor to ground, expected voltage = 1.0 V)."
    },
    {
      "number": "30",
      "name": "CLKOUT",
      "description": "Buffered 4-MHz output clock output.\nCan be connected to the clock input pin of an external microcontroller."
    },
    {
      "number": "21",
      "name": "DIAG_END",
      "description": "Output signal that indicates completion of diagnostics.\nCan be connected to the port pin of an external microcontroller."
    },
    {
      "number": "5, 6, 10",
      "name": "DNC",
      "description": "Do not connect these pins. Leave as open-circuit."
    },
    {
      "number": "1",
      "name": "INN",
      "description": "Receiver input pin. Connect to photodiode anode."
    },
    {
      "number": "2",
      "name": "INP",
      "description": "Receiver input pin. Connect to photodiode cathode."
    },
    {
      "number": "12, 13, 16",
      "name": "LED_DRV_GND",
      "description": "LED driver ground pin, H-bridge. Connect to common board ground."
    },
    {
      "number": "17, 18",
      "name": "LED_DRV_SUP",
      "description": "LED driver supply pin, H-bridge. Connect to an external power supply capable of supplying the large LED current, which is drawn by this supply pin."
    },
    {
      "number": "22",
      "name": "LED_ALM",
      "description": "Output signal that indicates an LED cable fault.\nCan be connected to the port pin of an external microcontroller."
    },
    {
      "number": "23",
      "name": "PD_ALM/ADC Reset",
      "description": "Output signal that indicates a PD sensor or cable fault.\nCan be connected to the port pin of an external microcontroller.\nIn ADC bypass mode, the PD_ALM pin can be used to bring out the ADC reset signal."
    },
    {
      "number": "29",
      "name": "RESET",
      "description": "AFE-only reset input, active low.\nCan be connected to the port pin of an external microcontroller."
    },
    {
      "number": "3, 36, 40",
      "name": "RX_ANA_GND",
      "description": "Rx analog ground pin. Connect to common board ground."
    },
    {
      "number": "33, 39",
      "name": "RX_ANA_SUP",
      "description": "Rx analog supply pin; 0.1-μF decoupling capacitor to ground"
    },
    {
      "number": "19, 32",
      "name": "RX_DIG_GND",
      "description": "Rx digital ground pin. Connect to common board ground."
    },
    {
      "number": "31",
      "name": "RX_DIG_SUP",
      "description": "Rx digital supply pin; 0.1-μF decoupling capacitor to ground"
    },
    {
      "number": "34",
      "name": "RXOUTN",
      "description": "External ADC negative input when in ADC bypass mode"
    },
    {
      "number": "35",
      "name": "RXOUTP",
      "description": "External ADC positive input when in ADC bypass mode"
    },
    {
      "number": "24",
      "name": "SCLK",
      "description": "SPI clock pin"
    },
    {
      "number": "26",
      "name": "SPISIMO",
      "description": "SPI serial in master out"
    },
    {
      "number": "25",
      "name": "SPISOMI",
      "description": "SPI serial out master in"
    },
    {
      "number": "27",
      "name": "SPISTE",
      "description": "SPI serial interface enable"
    },
    {
      "number": "11",
      "name": "TX_CTRL_SUP",
      "description": "Transmit control supply pin (0.1-μF decoupling capacitor to ground)"
    },
    {
      "number": "9",
      "name": "TX_REF",
      "description": "Transmitter reference voltage, 0.75 V default after reset. Connect a 2.2-μF decoupling capacitor to ground."
    },
    {
      "number": "14",
      "name": "TXN",
      "description": "LED driver out B, H-bridge output. Connect to LED."
    },
    {
      "number": "15",
      "name": "TXP",
      "description": "LED driver out B, H-bridge output. Connect to LED."
    },
    {
      "number": "4",
      "name": "VCM",
      "description": "Input common-mode voltage output.\nConnect a series resistor (1 kΩ) and a decoupling capacitor (10 nF) to ground.\nThe voltage across the capacitor can be used to shield (guard) the INP, INN traces. Expected voltage = 0.9 V."
    },
    {
      "number": "8",
      "name": "VSS",
      "description": "Substrate ground. Connect to common board ground."
    },
    {
      "number": "37",
      "name": "XOUT",
      "description": "Crystal oscillator pins.\nConnect an external 8-MHz crystal between these pins with the correct load capacitor (as specified by vendor) to ground."
    },
    {
      "number": "38",
      "name": "XIN",
      "description": "Crystal oscillator pins.\nConnect an external 8-MHz crystal between these pins with the correct load capacitor (as specified by vendor) to ground."
    }
  ],
  "type": "sensor",
  "url": "https://www.ti.com/lit/ds/symlink/afe4490.pdf?ts=1727708579491&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252Fde-de%252FAFE4490",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973a1bfffd9e41956791"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bmp390",
  "pages": "46",
  "pins": [
    {
      "number": "1",
      "name": "VDDIO",
      "description": "Digital interface supply"
    },
    {
      "number": "2",
      "name": "SCK",
      "description": "Serial clock input."
    },
    {
      "number": "3",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "SDI",
      "description": "Serial data input."
    },
    {
      "number": "5",
      "name": "SDO",
      "description": "Serial data output."
    },
    {
      "number": "6",
      "name": "CSB",
      "description": "Chip select"
    },
    {
      "number": "7",
      "name": "INT",
      "description": "INT output"
    },
    {
      "number": "8",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "9",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "10",
      "name": "VDD",
      "description": "Analog supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp390-ds002.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e41956792"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lsm6dsox",
  "pages": "-1",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-wire interface serial data output (SDO), I2C least significant bit of the device address (SA0)"
    },
    {
      "number": "2",
      "name": "SDx",
      "description": "Mode 1: Connect to VDDIO or GND, Mode 2: I2C serial data master (MSDA). Mode 3/4: Auxiliary SPI 3/4-wire interface serial data input (SDI_Aux) and SPI 3-wire serial data output (SDO_Aux)"
    },
    {
      "number": "3",
      "name": "SCx",
      "description": "Mode 1: Connect to VDDIO or GND, Mode 2: I2C serial clock master (MSCL), Mode 3/4: Auxiliary SPI 3-wire interface serial port clock (SPC_Aux)"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt in I2C and SPI"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Mode 1: Programmable interrupt 2 (INT2) / Data enable (DEN), Mode 2: Programmable interrupt 2 (INT2)/ Data enable (DEN)/ I2C master external synchronization signal (MDRDY), Mode 3: Programmable interrupt 2 (INT2)/ Data enable (DEN)"
    },
    {
      "number": "10",
      "name": "OCS_Aux",
      "description": "Mode 1: Leave unconnected, Mode 2: Leave unconnected, Mode 3/4: Auxiliary SPI 3/4-wire interface enable"
    },
    {
      "number": "11",
      "name": "SDO_Aux",
      "description": "Mode 1: Connect to VDDIO or leave unconnected, Mode 2: Connect to VDDIO or leave unconnected, Mode 3/4: Auxiliary SPI 3-wire interface: leave unconnected, Auxiliary SPI 4-wire interface: serial data output (SDO_Aux)"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/MIPI I3C/SPI mode\nselection (1: SPI idle mode / I2C/MIPI I3C communication enabled; 0: SPI communication mode / I2C/MIPI I3C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C/MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C/MIPI I3C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lsm6dsox.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e41956793"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE5501 E0001",
  "pages": "-1",
  "pins": [
    {
      "number": "1",
      "name": "COS_P",
      "description": "Analog positive cosine output"
    },
    {
      "number": "2",
      "name": "COS_N",
      "description": "Analog negative cosine output"
    },
    {
      "number": "3",
      "name": "GND2",
      "description": "Ground, internally connected to GND1"
    },
    {
      "number": "4",
      "name": "GND1",
      "description": "Ground"
    },
    {
      "number": "5",
      "name": "n.c.",
      "description": "not used, internally connected to GND2"
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "7",
      "name": "SIN_N",
      "description": "Analog negative sine output"
    },
    {
      "number": "8",
      "name": "SIN_P",
      "description": "Analog positive sine output"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-Infineon-TLE5501-DS-v01_00--DataSheet-v01_00-EN.pdf?fileId=5546d46264a8de7e0164eca986da1a32",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e41956794"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL830PUT",
  "pages": "27",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply Voltage and Programming Pin"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Push-Pull Output and Selection Pin"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/linear/linear-hall/data_sheet/hal_83x_robust_multi-purpose_programmable_linear_hall-effect_sensor_family_3dsh_0.pdf",
  "version": "6"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e41956795"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4966-3G",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "Q2",
      "description": "Speed"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Recommended connection to GND"
    },
    {
      "number": "3",
      "name": "Q1",
      "description": "Direction"
    },
    {
      "number": "4",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Recommended connection to GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4966-3G-DataSheet-v01_00-EN.pdf?fileId=5546d4626b2d8e69016b511a9d4a0ca1",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e41956796"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lis2dh12",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "Res",
      "description": "Connect to GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT_2",
      "description": "Interrupt pin 2"
    },
    {
      "number": "12",
      "name": "INT_1",
      "description": "Interrupt pin 1"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lis2dh12.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e41956797"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4964-5M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4964-5M-DataSheet-v01_20-EN.pdf?fileId=db3a30433cabdd35013cc959c5666509",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e4195679b"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP464",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "NCS",
      "description": "Not-Chip-Select (active-low)"
    },
    {
      "number": "2",
      "name": "CLK",
      "description": "Serial Clock"
    },
    {
      "number": "3",
      "name": "SDI",
      "description": "Serial Data In"
    },
    {
      "number": "4",
      "name": "SDO",
      "description": "Serial Data Out"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "VPROG",
      "description": "Programming Voltage"
    },
    {
      "number": "7",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP464-DataSheet-v01_20-EN.pdf?fileId=8ac78c8c88ae21230188bf6d919811d7",
  "version": "1.20"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e4195679c"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_stts22h",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "SCL",
      "description": "SMBus/I²C serial interface clock\n"
    },
    {
      "number": "2",
      "name": "ALERT / INT",
      "description": "Open-drain interrupt output. The output supports the SMBus Alert (ARA)"
    },
    {
      "number": "3",
      "name": "VDD",
      "description": "Power supply VDD"
    },
    {
      "number": "4",
      "name": "Addr",
      "description": "SMBus/I2C address selection. The pin at power-up determines the SMBus slave address according to the connection shown in Table 2."
    },
    {
      "number": "5",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "6",
      "name": "SDA",
      "description": "SMBus/I2C serial data line"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/stts22h.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e4195679d"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4999C8-S0001",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "CBUF",
      "description": "Buffer capacitor pin"
    },
    {
      "number": "2",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "OUT",
      "description": "SPC output / programming interface I/O"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "6",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "7",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "8",
      "name": "NC",
      "description": "Not connected"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4999C8-S0001-DataSheet-v01_00-EN.pdf?fileId=8ac78c8c821f389001824022f24974a2",
  "version": "01_00"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e4195679e"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP216K1409",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "TEST",
      "description": "Test pin"
    },
    {
      "number": "2",
      "name": "CLOCK / VPROG",
      "description": "External clock for communication / programming voltage"
    },
    {
      "number": "3",
      "name": "DATA IN",
      "description": "Serial data input pin"
    },
    {
      "number": "4",
      "name": "DATA OUT",
      "description": "Serial data output pin"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Circuit ground potential"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Analog pressure signal output"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Circuit ground potential"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP216K1409-DS-v01_01-en.pdf?fileId=db3a30432ad629a6012af6b519ec0b50",
  "version": "1.1"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e4195679f"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLI4966G",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "Q2",
      "description": "Speed"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Recommended connection to GND"
    },
    {
      "number": "3",
      "name": "Q1",
      "description": "Direction"
    },
    {
      "number": "4",
      "name": "VS",
      "description": "Supply voltage"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Recommended connection to GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLI4966G-DataSheet-v01_00-EN.pdf?fileId=5546d46269e1c019016a2acfa3af258c",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e419567a0"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAC3725UF",
  "pages": "44",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply Voltage"
    },
    {
      "number": "2",
      "name": "TEST1",
      "description": "Test"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "Test2",
      "description": "Test"
    },
    {
      "number": "5",
      "name": "OUT",
      "description": "Output and Programming"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/angle/direct-angle/data_sheet/hac_371x_hac_372x_hac_373x_programmable_2d_position_sensors_with_integrated_caps.pdf",
  "version": "2"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e419567a1"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLV4961-1TB",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "Q",
      "description": "Output"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLV4961_1TAB-DataSheet-v01_20-EN.pdf?fileId=5546d4624e765da5014ede3a726e0b89",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e419567a2"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP216H1416",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "TEST",
      "description": "Test pin"
    },
    {
      "number": "2",
      "name": "CLOCK / VPROG",
      "description": "External clock for communication / programming voltage"
    },
    {
      "number": "3",
      "name": "DATA IN",
      "description": "Serial data input pin"
    },
    {
      "number": "4",
      "name": "DATA OUT",
      "description": "Serial data output pin"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Circuit ground potential"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Analog pressure signal output"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Circuit ground potential"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP216H1416-DS-v01_01-en.pdf?fileId=db3a30432ad629a6012af6b321c40b4a",
  "version": "1.1"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e419567a3"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1501UA",
  "pages": "15",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_to92_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e419567a4"
  },
  "flag": "old",
  "manufacturer": "Murata",
  "name": "SCC2230",
  "pages": "9",
  "pins": [
    {
      "number": "1, 12, 13, 24",
      "name": "HEAT",
      "description": "Heat sink connection, connect externally to AVSS"
    },
    {
      "number": "2, 11",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    },
    {
      "number": "3",
      "name": "EXTRESN",
      "description": "External Reset, 3.3V logic compatible Schmitt-trigger input with internal\npull-up, LOW-HIGH transition causes system restart. Minimum low time\n100us"
    },
    {
      "number": "4",
      "name": "SCK",
      "description": "CLK signal of SPI Interface"
    },
    {
      "number": "5",
      "name": "MISO",
      "description": "Data Out of SPI Interface"
    },
    {
      "number": "6",
      "name": "VBOOST",
      "description": "External capacitor connection for high voltage analog supply,\nhigh voltage pad ≈20V"
    },
    {
      "number": "7",
      "name": "LBOOST",
      "description": "Connection for inductor for high voltage generation,\nhigh voltage pad ≈20V"
    },
    {
      "number": "8",
      "name": "DVSS",
      "description": "Digital Supply Return, connect externally to AVSS"
    },
    {
      "number": "9",
      "name": "DVDD",
      "description": "Digital Supply Voltage"
    },
    {
      "number": "10",
      "name": "D_EXTC",
      "description": "External capacitor connection for digital core ( typ. 1.8V)"
    },
    {
      "number": "11",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    },
    {
      "number": "12",
      "name": "AVDD",
      "description": "Analog Supply voltage"
    },
    {
      "number": "13",
      "name": "A_EXTC",
      "description": "External capacitor connection for positive reference voltage"
    },
    {
      "number": "16",
      "name": "AVSS_REF",
      "description": "Analog reference ground, connect externally to AVSS"
    },
    {
      "number": "17",
      "name": "AVSS",
      "description": "Analog Supply Return, connect externally to DVSS"
    },
    {
      "number": "18",
      "name": "CSB",
      "description": "Chip Select of SPI Interface, 3.3V logic compatible Schmitt-trigger input"
    },
    {
      "number": "19",
      "name": "MOSI",
      "description": "Data In of SPI Interface, 3.3V logic compatible Schmitt-trigger input"
    },
    {
      "number": "20",
      "name": "RESERVED",
      "description": "Factory use only, leave floating or connect to GND"
    },
    {
      "number": "21",
      "name": "RESERVED",
      "description": "Factory use only, leave floating or connect to GND"
    },
    {
      "number": "22",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    },
    {
      "number": "23",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    }
  ],
  "type": "sensor",
  "url": "https://www.murata.com/-/media/webrenewal/products/sensor/pdf/datasheet/datasheet_scc2230-d08.ashx?la=en&cvid=20190118045358930400",
  "version": "D08"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e419567a5"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1562UA",
  "pages": "14",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply and output"
    },
    {
      "number": "3",
      "name": "AUX",
      "description": "Functional test pin, connection to ground is recommended"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_156y_hall-effect_switch_with_current_interface_2-wire_in_to92_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e419567a6"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lsm303ah",
  "pages": "12",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "Reserved",
      "description": "Reserved, connected to GND"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "C1",
      "description": "Capacitor connection (C1 = 220 nF)"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V"
    },
    {
      "number": "7",
      "name": "INT_MAG/DRDY",
      "description": "Magnetometer interrupt/data-ready signal"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT_2_XL",
      "description": "Accelerometer interrupt 2"
    },
    {
      "number": "12",
      "name": "INT_1_XL",
      "description": "Accelerometer interrupt 1"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lsm303ah.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e419567a7"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_mp34dt06j",
  "pages": "2",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "2",
      "name": "LR",
      "description": "Left/Right channel selection\n"
    },
    {
      "number": "3",
      "name": "CLK",
      "description": "Synchronization input clock\n"
    },
    {
      "number": "4",
      "name": "DOUT",
      "description": "Left/Right PDM data output"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/mp34dt06j.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e419567a8"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP235",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "TEST",
      "description": "Test pin"
    },
    {
      "number": "2",
      "name": "CLOCK / VPROG",
      "description": "External clock for communication / programming voltage"
    },
    {
      "number": "3",
      "name": "DATA IN",
      "description": "Serial data input pin"
    },
    {
      "number": "4",
      "name": "DATA OUT",
      "description": "Serial data output pin"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Circuit ground potential"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Analog pressure signal output"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Circuit ground potential"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP235-DataSheet-v01_10-EN.pdf?fileId=db3a30432ad629a6012af67ba47c0b0f",
  "version": "1.1"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e419567a9"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP229E3111",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "TEST",
      "description": "Test pin"
    },
    {
      "number": "2",
      "name": "CLOCK / VPROG",
      "description": "External clock for communication / programming voltage"
    },
    {
      "number": "3",
      "name": "DATA IN",
      "description": "Serial data input pin"
    },
    {
      "number": "4",
      "name": "DATA OUT",
      "description": "Serial data output pin"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Circuit ground potential"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Analog pressure signal output"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Circuit ground potential"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP229E3111-DS-v01_00-EN.pdf?fileId=5546d4624bcaebcf014be98f6a2e3c19",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e419567aa"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_stlm75",
  "pages": "8",
  "pins": [
    {
      "number": "1",
      "name": "SDA",
      "description": "Serial data input/output"
    },
    {
      "number": "2",
      "name": "SCL",
      "description": "Serial clock input"
    },
    {
      "number": "3",
      "name": "!OS/INT",
      "description": "Overlimit signal/interrupt alert output"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "5",
      "name": "A2",
      "description": "Address2 input"
    },
    {
      "number": "6",
      "name": "A1",
      "description": "Address1 input"
    },
    {
      "number": "7",
      "name": "A0",
      "description": "Address0 input"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Supply voltage (2.7 V to 5.5 V)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/stlm75.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e419567ab"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLV4961-3M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLV4961-3M-DataSheet-v01_20-EN.pdf?fileId=5546d46253f650570154529f327d6fdf",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e419567ac"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_vl6180v1",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "GPIO1",
      "description": "Interrupt output. Open-drain. If used, it should be pulled high with 47 kOhm resistor, otherwise left unconnected."
    },
    {
      "number": "2",
      "name": "NC",
      "description": "No connect"
    },
    {
      "number": "3",
      "name": "NC",
      "description": "No connect"
    },
    {
      "number": "4",
      "name": "GPIO0/CE",
      "description": "Power-up default is chip enable (CE). It should be pulled high with a 47 kOhm resistor."
    },
    {
      "number": "5",
      "name": "SCL",
      "description": "I2C serial clock"
    },
    {
      "number": "6",
      "name": "SDA",
      "description": "I2C serial data"
    },
    {
      "number": "7",
      "name": "NC",
      "description": "No connect"
    },
    {
      "number": "8",
      "name": "AVDD_VCSEL",
      "description": "VCSEL power supply. 2.6 to 3.0 V"
    },
    {
      "number": "9",
      "name": "AVSS_VCSEL",
      "description": "VCSEL ground"
    },
    {
      "number": "10",
      "name": "AVDD",
      "description": "Digital/analog power supply. 2.6 to 3.0 V"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "No connect"
    },
    {
      "number": "12",
      "name": "GND",
      "description": "Digital/analog ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/vl6180.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e419567ad"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_ICS-40730",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "2",
      "name": "OUTPUT+",
      "description": "Noninverting analog output signal relative to the acoustic input"
    },
    {
      "number": "3",
      "name": "OUTPUT-",
      "description": "Inverting analog output signal relative to the acoustic input"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sw_piezo/mic/mems-mic/data_sheet/ics-40730-datasheet.pdf",
  "version": "1.1"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e419567af"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1882UA",
  "pages": "13",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply Voltage Pin"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Push-Pull Output"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/linear/linear-hall/data_sheet/hal1881_hal1882_hal1883_preprogrammed_linear_hall-effect_sensors_in_to92ua_package.pdf",
  "version": "4"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e419567b1"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bmm150",
  "pages": "41",
  "pins": [
    {
      "number": "A1",
      "name": "PS",
      "description": "Protocol select."
    },
    {
      "number": "A3",
      "name": "SCK",
      "description": "Serial clock."
    },
    {
      "number": "A5",
      "name": "CSB",
      "description": "Chip Select."
    },
    {
      "number": "B2",
      "name": "VDDIO",
      "description": "I/O voltage"
    },
    {
      "number": "B4",
      "name": "SDI",
      "description": "SPI: Data, I2C: Data."
    },
    {
      "number": "C1",
      "name": "SDO",
      "description": "SPI: Data out."
    },
    {
      "number": "C5",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "D2",
      "name": "INT",
      "description": "Interrupt output"
    },
    {
      "number": "D4",
      "name": "DRDY",
      "description": "Data ready"
    },
    {
      "number": "E1",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "E3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "E5",
      "name": "VDD",
      "description": "Supply voltage"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmm150-ds001.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e419567b2"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP467",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "NCS",
      "description": "Not-Chip-Select (active-low)"
    },
    {
      "number": "2",
      "name": "CLK",
      "description": "Serial Clock"
    },
    {
      "number": "3",
      "name": "SDI",
      "description": "Serial Data In"
    },
    {
      "number": "4",
      "name": "SDO",
      "description": "Serial Data Out"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "VPROG",
      "description": "Programming Voltage"
    },
    {
      "number": "7",
      "name": "WUOUT",
      "description": "Wake-up pin"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP467-DataSheet-v01_00-EN.pdf?fileId=8ac78c8c8e7ead30018ebe5defdb760d",
  "version": "1.00"
},
{
  "_id": {
    "$oid": "680f973b1bfffd9e419567b4"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "SP40PLUS",
  "pages": "18-20",
  "pins": [
    {
      "number": "1",
      "name": "SCL/PP0",
      "description": "General Purpose-I/O I2C Clock"
    },
    {
      "number": "2",
      "name": "SDA/PP1",
      "description": "General Purpose-I/O I2C Data"
    },
    {
      "number": "3",
      "name": "PP2",
      "description": "General Purpose-I/O UART RX data"
    },
    {
      "number": "4",
      "name": "GNDD",
      "description": "Digital Ground"
    },
    {
      "number": "5",
      "name": "PP3",
      "description": "General Purpose-I/O UART TX data"
    },
    {
      "number": "6",
      "name": "XIN",
      "description": "Crystal oscillator input"
    },
    {
      "number": "7",
      "name": "XOUT",
      "description": "Crystal oscillator output"
    },
    {
      "number": "8",
      "name": "LFN",
      "description": "LF receiver negative input"
    },
    {
      "number": "9",
      "name": "LFP",
      "description": "LF receiver positive input"
    },
    {
      "number": "10",
      "name": "VDDREG",
      "description": "Regulated voltage output (1.5V)2)"
    },
    {
      "number": "11",
      "name": "GNDA",
      "description": "Analog Ground"
    },
    {
      "number": "12",
      "name": "PAOUT",
      "description": "RF power amplifier output"
    },
    {
      "number": "13",
      "name": "VDDPA",
      "description": "Regulated voltage for PA"
    },
    {
      "number": "14",
      "name": "VDDBAT",
      "description": "Power supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-SP400-11-11-DataSheet-v01_03-EN.pdf?fileId=5546d4627255dbad01725cf7c7a56f6f",
  "version": "1.3"
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567b5"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE493D-A2B6",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "SCL /INT",
      "description": "Interface serial clock pin (input)\nInterrupt pin, signals a finished measurement cycle, open-drain"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground Pin"
    },
    {
      "number": "4",
      "name": "VDD",
      "description": "Supply Pin"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "6",
      "name": "SDA",
      "description": "Interface serial data pin (input/output), open-drain"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE493D-A2B6-DataSheet-v01_30-EN.pdf?fileId=5546d46262b31d2e0163162c9ec065f8",
  "version": "1.3"
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567b6"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1890UA",
  "pages": "30",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply Voltage"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Open-Drain Output"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/linear/linear-hall/data_sheet/hal_1890_programmable_linear_hall-effect_sensor_with_sent_interface.pdf",
  "version": "1"
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567b7"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4946-2K",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "Vs",
      "description": "Supply Voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4946_2K-DS-v01_00-en.pdf?fileId=db3a30431f848401011fbc925c48637f",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567b8"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL835PUT",
  "pages": "27",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply Voltage and Programming Pin"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Push-Pull Output and Selection Pin"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/linear/linear-hall/data_sheet/hal_83x_robust_multi-purpose_programmable_linear_hall-effect_sensor_family_3dsh_0.pdf",
  "version": "6"
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567b9"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lis2du12",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C/MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI/I2C/MIPI I3C mode selection (1: SPI idle mode / I2C/MIPI I3C enabled; 0: SPI enabled / I2C/MIPI I3C disabled)"
    },
    {
      "number": "3",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C/MIPI I3C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to VDD, VDDIO, or GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2. Clock input when selected in single data conversion on demand"
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lis2du12.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567ba"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bha260ab",
  "pages": "18-19",
  "pins": [
    {
      "number": "1",
      "name": "JTAG_CLK",
      "description": "Debug Clock"
    },
    {
      "number": "2",
      "name": "M2SDX",
      "description": "M2: SPI MOSI / I2C SDA"
    },
    {
      "number": "3",
      "name": "JTAG_DIO",
      "description": "Debug Data"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Analog Sensor Ground"
    },
    {
      "number": "5",
      "name": "GNDIO",
      "description": "Digital IO and Fuser Ground"
    },
    {
      "number": "6",
      "name": "VDDIO",
      "description": "Digital IO and Fuser Supply"
    },
    {
      "number": "7",
      "name": "VDD",
      "description": "Analogue Sensor Supply"
    },
    {
      "number": "8",
      "name": "VREG",
      "description": "Voltage Regulator Output"
    },
    {
      "number": "9",
      "name": "HSDO",
      "description": "Host Interface: SPI MISO / I2C address select"
    },
    {
      "number": "10",
      "name": "HSDX",
      "description": "Host Interface: SPI MOSI, I2C SDA"
    },
    {
      "number": "11",
      "name": "HCSB",
      "description": "Host Interface: SPI Chip Select / Protocol Select"
    },
    {
      "number": "12",
      "name": "M3SDA",
      "description": "M3 I2C SDA"
    },
    {
      "number": "13",
      "name": "RESETN",
      "description": "Reset input, active low"
    },
    {
      "number": "14",
      "name": "M3SCL",
      "description": "M3 I2C SCL"
    },
    {
      "number": "15",
      "name": "MCSB3",
      "description": "SPI Chip Select 3"
    },
    {
      "number": "16",
      "name": "M2SCX",
      "description": "M2: SPI SCK / SCL"
    },
    {
      "number": "17",
      "name": "MCSB2",
      "description": "SPI Chip Select 2"
    },
    {
      "number": "18",
      "name": "MCSB1",
      "description": "SPI Chip Select 1"
    },
    {
      "number": "19",
      "name": "HSCX",
      "description": "Host Interface: SPI SCK / I2C SCL"
    },
    {
      "number": "20",
      "name": "HIRQ",
      "description": "Host Interface Interrupt Output"
    },
    {
      "number": "21",
      "name": "M2SDI",
      "description": "M2: SPI MISO / unused"
    },
    {
      "number": "22",
      "name": "RESV",
      "description": "Do Not Connect (internal Accel interrupt 2)"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bha260ab-ds000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567bb"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4961-5M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4961-5M-DataSheet-v01_02-EN.pdf?fileId=db3a30433fe811c7013ff1eb97b65ec9",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567bc"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1504UA",
  "pages": "15",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_to92_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567bd"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLV4961-1TA",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "Q",
      "description": "Output"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLV4961_1TAB-DataSheet-v01_20-EN.pdf?fileId=5546d4624e765da5014ede3a726e0b89",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567be"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_st1vafe6ax",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "SDO/TA0",
      "description": "SPI 4-wire interface serial data output (SDO), I2C least significant bit of the device address (TA0)"
    },
    {
      "number": "2",
      "name": "RES",
      "description": "Connect to GND or VDDIO"
    },
    {
      "number": "3",
      "name": "RES",
      "description": "Connect to GND or VDDIO"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt in I2C and SPI"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "AH1/BIO1",
      "description": "Connect to VDD or GND if the analog hub and vAFE are disabled. AH input 1 (or BIO electrode 1) is connected if the analog hub (or vAFE) is enabled."
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "AH2/BIO2",
      "description": "Connect to VDD or GND if the analog hub and vAFE are disabled. AH input 2 (or BIO electrode 2) is connected if the analog hub (or vAFE) is enabled"
    },
    {
      "number": "10",
      "name": "INT2",
      "description": "Programmable interrupt 2 in I2C and SPI"
    },
    {
      "number": "11",
      "name": "RES",
      "description": "Connect to VDDIO or leave unconnected"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C / MIPI I3C / SPI mode selection\n(1: SPI idle mode / I2C / MIPI I3C communication enabled; 0: SPI communication mode / I2C / MIPI I3C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C / MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C / MIPI I3C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/st1vafe6ax.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567bf"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1508UA",
  "pages": "15",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_to92_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567c0"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lis3dh",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "3",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "4",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "6",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "7",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "8",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (1: I2C mode; 0: SPI enabled)"
    },
    {
      "number": "9",
      "name": "INT_2",
      "description": "Inertial interrupt 2"
    },
    {
      "number": "10",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "11",
      "name": "INT_1",
      "description": "Inertial interrupt 1"
    },
    {
      "number": "12",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "13",
      "name": "ADC3",
      "description": "Analog-to-digital converter input 3"
    },
    {
      "number": "14",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "15",
      "name": "ADC2",
      "description": "Analog-to-digital converter input 2"
    },
    {
      "number": "16",
      "name": "ADC1",
      "description": "Analog-to-digital converter input 1"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lis3dh.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567c1"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP212F1701",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "TEST",
      "description": "Test pin"
    },
    {
      "number": "2",
      "name": "CLOCK / VPROG",
      "description": "External clock for communication / programming\nvoltage"
    },
    {
      "number": "3",
      "name": "DATA IN",
      "description": "Serial data input pin"
    },
    {
      "number": "4",
      "name": "DATA OUT",
      "description": "Serial data output pin"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Circuit ground potential"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Analog pressure signal output"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Circuit ground potential"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP212F1701-DataSheet-v01_00-EN.pdf?fileId=5546d4627506bb320175410daf8b536d",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567c2"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4961-1L",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "Q",
      "description": "Output"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4961-1L-DataSheet-v01_02-EN.pdf?fileId=db3a3043397219b6013977b435505444",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567c3"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP236",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "TEST",
      "description": "Test pin"
    },
    {
      "number": "2",
      "name": "CLOCK / VPROG",
      "description": "External clock for communication / programming voltage"
    },
    {
      "number": "3",
      "name": "DATA IN",
      "description": "Serial data input pin"
    },
    {
      "number": "4",
      "name": "DATA OUT",
      "description": "Serial data output pin"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Circuit ground potential"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Analog pressure signal output"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Circuit ground potential"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP236-DS-v01_00-en.pdf?fileId=db3a30432ad629a6012af67dbdc20b14",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567c4"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lsm6dso",
  "pages": "8",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-wire interface serial data output (SDO), I2C least significant bit of the device address (SA0)"
    },
    {
      "number": "2",
      "name": "SDx",
      "description": "Mode 1: Connect to VDDIO or GND, Mode 2: I2C serial data master (MSDA). Mode 3/4: Auxiliary SPI 3/4-wire interface serial data input (SDI_Aux) and SPI 3-wire serial data output (SDO_Aux)"
    },
    {
      "number": "3",
      "name": "SCx",
      "description": "Mode 1: Connect to VDDIO or GND, Mode 2: I2C serial clock master (MSCL), Mode 3/4: Auxiliary SPI 3-wire interface serial port clock (SPC_Aux)"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt in I2C and SPI"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Mode 1: Programmable interrupt 2 (INT2) / Data enable (DEN), Mode 2: Programmable interrupt 2 (INT2)/ Data enable (DEN)/ I2C master external synchronization signal (MDRDY), Mode 3/4: Programmable interrupt 2 (INT2)/ Data enable (DEN)"
    },
    {
      "number": "10",
      "name": "OCS_Aux",
      "description": "Mode 1: Leave unconnected, Mode 2: Leave unconnected, Mode 3/4: Auxiliary SPI 3/4-wire interface enable"
    },
    {
      "number": "11",
      "name": "SDO_Aux",
      "description": "Mode 1: Connect to VDDIO or leave unconnected, Mode 2: Connect to VDDIO or leave unconnected, Mode 3/4: Auxiliary SPI 3-wire interface: leave unconnected, Auxiliary SPI 4-wire interface: serial data output (SDO_Aux)"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/MIPI I3C/SPI mode\nselection (1: SPI idle mode / I2C/MIPI I3C communication enabled; 0: SPI communication mode / I2C/MIPI I3C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C/MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C/MIPI I3C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lsm6dso.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567c5"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_mp23db01hp",
  "pages": "2",
  "pins": [
    {
      "number": "1",
      "name": "DOUT",
      "description": "Left/right PDM data output"
    },
    {
      "number": "2",
      "name": "L/R",
      "description": "Left/right channel selection"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "4",
      "name": "CLK",
      "description": "Synchronization input clocks"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/mp23db01hp.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567c6"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4961-3L",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "Q",
      "description": "Output"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4961-3L-DataSheet-v01_02-EN.pdf?fileId=db3a30433899edae0138c3c365920311",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567c7"
  },
  "flag": "old",
  "manufacturer": "Texas Instruments",
  "name": "ti_LMK61E2",
  "pages": "3",
  "pins": [
    {
      "number": "3",
      "name": "GND",
      "description": "Device Ground."
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "3.3-V Power Supply."
    },
    {
      "number": "4",
      "name": "OUTP",
      "description": "Differential Output Pair (LVPECL, LVDS or HCSL)."
    },
    {
      "number": "5",
      "name": "OUTN",
      "description": "Differential Output Pair (LVPECL, LVDS or HCSL)."
    },
    {
      "number": "2",
      "name": "ADD",
      "description": "When left open, LSB of I²C slave address is set to 01. When tied to VDD, LSB of I²C slave address is set to 10. When tied to GND, LSB of I²C slave address is set to 00."
    },
    {
      "number": "1",
      "name": "OE",
      "description": "Output Enable (internal pullup). When set to low, output pair is disabled and set at high impedance."
    },
    {
      "number": "8",
      "name": "SCL",
      "description": "I²C Serial Clock (open-drain). Requires an external pullup resistor to VDD."
    },
    {
      "number": "7",
      "name": "SDA",
      "description": "I²C Serial Data (bidirectional, open-drain). Requires an external pullup resistor to VDD."
    }
  ],
  "type": "sensor",
  "url": "https://www.ti.com/lit/ds/symlink/lmk61e2.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567c8"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_i3g4250d",
  "pages": "3",
  "pins": [
    {
      "number": "1",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "3",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "4",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "5",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "6",
      "name": "DRDY/INT2",
      "description": "Data ready/FIFO interrupt"
    },
    {
      "number": "7",
      "name": "INT1",
      "description": "Programmable interrupt"
    },
    {
      "number": "8",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "9",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "10",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "11",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "12",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "13",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "14",
      "name": "PLLFILT",
      "description": "Phase-locked loop filter"
    },
    {
      "number": "15",
      "name": "Reserved",
      "description": "Connect to VDD"
    },
    {
      "number": "16",
      "name": "VDD",
      "description": "Power supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/i3g4250d.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567ca"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLI493D-W2BW",
  "pages": "6",
  "pins": [
    {
      "number": "A1",
      "name": "/INT",
      "description": "Interrupt pin, signals a finished measurement cycle1) (output), open-drain"
    },
    {
      "number": "A3",
      "name": "SDA",
      "description": "Interface serial data pin (input/output), open-drain"
    },
    {
      "number": "B2",
      "name": "SCL",
      "description": "Interface serial clock pin (input)"
    },
    {
      "number": "C1",
      "name": "GND",
      "description": "Ground pin"
    },
    {
      "number": "C3",
      "name": "VDD",
      "description": "Supply pin"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLI493D-W2BW-DataSheet-v01_00-EN.pdf?fileId=5546d46273a5366f0173b9bc938d2e1d",
  "version": "1.00"
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567cb"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_stcn75",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "SDA",
      "description": "Serial data input/output"
    },
    {
      "number": "2",
      "name": "SCL",
      "description": "Serial clock input"
    },
    {
      "number": "3",
      "name": "OS/INT",
      "description": "Overlimit signal/interrupt alert output"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "5",
      "name": "A2",
      "description": "Address2 input"
    },
    {
      "number": "6",
      "name": "A1",
      "description": "Address1 input"
    },
    {
      "number": "7",
      "name": "A0",
      "description": "Address0 input"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Supply voltage (2.7 V to 5.5 V)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/stcn75.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567cc"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lps22df",
  "pages": "3",
  "pins": [
    {
      "number": "1",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "SCL/SPC",
      "description": "I2C / MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "3",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C / MIPI I3C serial data (SDA), 4-wire SPI serial data input (SDI), 3-wire serial data input/output (SDI/SDO)"
    },
    {
      "number": "5",
      "name": "SDO/SA0",
      "description": "4-wire SPI serial data output (SDO), I2C least significant bit of the device address (SA0), MIPI I3C least significant bit of the static address (SA0)"
    },
    {
      "number": "6",
      "name": "CS",
      "description": "Enables SPI, I2C and MIPI I3C / SPI mode selection (1: SPI idle mode / I2C and MIPI I3C communication enabled; 0: SPI communication mode / I2C and MIPI I3C disabled)"
    },
    {
      "number": "7",
      "name": "INT_DRDY",
      "description": "Interrupt or data-ready"
    },
    {
      "number": "8",
      "name": "GND_IO",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "VDD",
      "description": "Power supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lps22df.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567cd"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP214N2611",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "TEST",
      "description": "Test pin"
    },
    {
      "number": "2",
      "name": "CLOCK / VPROG",
      "description": "External clock for communication / programming voltage"
    },
    {
      "number": "3",
      "name": "DATA IN",
      "description": "Serial data input pin"
    },
    {
      "number": "4",
      "name": "DATA OUT",
      "description": "Serial data output pin"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Circuit ground potential"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Analog pressure signal output"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Circuit ground potential"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP214N2611-DS-v01_00-en.pdf?fileId=db3a30432ad629a6012af6ab37f00b3a",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567ce"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1508SU",
  "pages": "14",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_sot23_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567cf"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins\n"
    },
    {
      "number": "2",
      "name": "SCL/SPC",
      "description": "I2C / MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "3",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C / MIPI I3C serial data (SDA), 3-wire SPI serial data input (SDI), 3-wire serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "AH2/QVAR2",
      "description": "Connect to GND if analog input / Qvar sensing is not needed."
    },
    {
      "number": "6",
      "name": "CS",
      "description": "Enables SPI, I2C and MIPI I3C / SPI mode selection (1: SPI idle mode / I2C and MIPI I3C communication enabled; 0: SPI communication mode / I2C and MIPI I3C disabled)"
    },
    {
      "number": "7",
      "name": "AH1/QVAR1 ",
      "description": "Connect to GND if analog input / Qvar sensing is not needed"
    },
    {
      "number": "8",
      "name": "GND_IO",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "VDD",
      "description": "Power supply\n"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/ilps22qs.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567d0"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4968-1L",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "Q",
      "description": "Output"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4968-1L-DataSheet-v01_20-EN.pdf?fileId=db3a30433899edae0138c3bcb66c0304",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567d1"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_ICM-42605",
  "pages": "19",
  "pins": [
    {
      "number": "1",
      "name": "AP_SDO / AP_AD0 ",
      "description": "AP_SDO: AP SPI serial data output (4-wire mode);\nAP_AD0: AP I3CSM / I2C slave address LSB"
    },
    {
      "number": "2",
      "name": "RESV",
      "description": "No Connect or Connect to GND"
    },
    {
      "number": "3",
      "name": "RESV",
      "description": "No Connect or Connect to GND"
    },
    {
      "number": "4",
      "name": "INT1 / INT",
      "description": "INT1: Interrupt 1 (Note: INT1 can be push-pull or open drain)\nINT: All interrupts mapped to pin 4"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "IO power supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Power supply ground"
    },
    {
      "number": "7",
      "name": "RESV",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply voltage"
    },
    {
      "number": "9",
      "name": "INT2 / FSYNC ",
      "description": "INT2: Interrupt 2 (Note: INT2 can be push-pull or open drain)\nFSYNC: Frame sync input; Connect to GND if FSYNC not used"
    },
    {
      "number": "10",
      "name": "RESV",
      "description": "No Connect or Connect to GND"
    },
    {
      "number": "11",
      "name": "RESV",
      "description": "No Connect or Connect to GND"
    },
    {
      "number": "12",
      "name": "AP_CS ",
      "description": "AP SPI Chip select (AP SPI interface); Connect to VDDIO if using AP I3CSM / I2C"
    },
    {
      "number": "13",
      "name": "AP_SCL / AP_SCLK ",
      "description": "AP_SCL: AP I3CSM / I2C serial clock; AP_SCLK: AP SPI serial clock"
    },
    {
      "number": "14",
      "name": "AP_SDA / AP_SDIO / AP_SDI",
      "description": "AP_SDA: AP I3CSM / I2C serial data; AP_SDIO: AP SPI serial data I/O (3-wire\nmode); AP_SDI: AP SPI serial data input (4-wire mode)"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/imu/data_sheet/ds-000292-icm-42605-v1.6.pdf",
  "version": "1.6"
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567d2"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4999I3",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "CBUF",
      "description": "Buffer capacitor"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "PSI5",
      "description": "PSI5 output/ supply voltage"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4999I3-DataSheet-v01_00-EN.pdf?fileId=5546d46269e1c019016a25bb8461599b",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567d3"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLV4961-1M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLV4961-1M-DataSheet-v01_20-EN.pdf?fileId=5546d46253f650570154529f2aae6fdc",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567d5"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_ais328dq",
  "pages": "8",
  "pins": [
    {
      "number": "1",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "3",
      "name": "INT_2",
      "description": "Inertial interrupt 2"
    },
    {
      "number": "4",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "INT_1",
      "description": "Inertial interrupt 1"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "11",
      "name": "SPC/SCL",
      "description": "SPI serial port clock (SPC), I2C serial clock (SCL), Internal active pull-up"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (0: SPI enabled; 1: I2C mode), Internal active pull-up"
    },
    {
      "number": "13",
      "name": "Reserved",
      "description": "Connect to VDD"
    },
    {
      "number": "14",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "15",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0), Internal active pull-up"
    },
    {
      "number": "16",
      "name": "SDI/SDO/SDA",
      "description": "SPI serial data input (SDI), 3-Wire interface serial data output (SDO), I2C serial data (SDA), Internal active pull-up"
    },
    {
      "number": "17",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "18",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "19",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "20",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "21",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "22",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "23",
      "name": "NC",
      "description": "Not internally connected"
    },
    {
      "number": "24",
      "name": "NC",
      "description": "Not internally connected"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/ais328dq.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567d6"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lis2hh12",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "Res",
      "description": "Connect to GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT_2",
      "description": "Interrupt pin 2"
    },
    {
      "number": "12",
      "name": "INT_1",
      "description": "Interrupt pin 1"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lis2hh12.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973c1bfffd9e419567d7"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1504SU",
  "pages": "14",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_sot23_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567d9"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bme690",
  "pages": "2",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "2",
      "name": "CSB",
      "description": "Chip Select. SPI 4-Wire: CSB. SPI 3-Wire: CSB. I2C: VDDIO"
    },
    {
      "number": "3",
      "name": "SDI",
      "description": "Serial data input. SPI 4-Wire: SDI. SPI 3-Wire: SDI/SDO. I2C: SDA"
    },
    {
      "number": "4",
      "name": "SCK",
      "description": "Serial clock input. SPI 4-Wire: SCK. SPI 3-Wire: SCK. I2C: SCL"
    },
    {
      "number": "5",
      "name": "SDO",
      "description": "Serial data output. SPI 4-Wire: SDO. SPI 3-Wire: DNC. I2C: GND for default address"
    },
    {
      "number": "6",
      "name": "VDDIO",
      "description": "Digital / Interface supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Analog supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/product_flyer/bst-bme690-fl00.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567da"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4963-2M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4963-2M-DataSheet-v01_02-EN.pdf?fileId=5546d462525dbac4015287edd79f27ca",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567dc"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bmp280",
  "pages": "34",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "2",
      "name": "CSB",
      "description": "Chip select. SPI 4-Wire: CSB. SPI 3-Wire: CSB. I2C: VDDIO"
    },
    {
      "number": "3",
      "name": "SDI",
      "description": "Serial data input. SPI 4-Wire: SDI. SPI 3-Wire: SDI/SDO. I2C: SDA"
    },
    {
      "number": "4",
      "name": "SCK",
      "description": "Serial clock input. SPI 4-Wire: SCK. SPI 3-Wire: SCK. I2C: SCL"
    },
    {
      "number": "5",
      "name": "SDO",
      "description": "Serial data output. SPI 4-Wire: SDO. SPI 3-Wire: DNC. I2C: GND for default address"
    },
    {
      "number": "6",
      "name": "VDDIO",
      "description": "Digital interface supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Analog supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567dd"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE5014",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "IF1",
      "description": "address coding for programming in bus mode,\n(see Table 4-5)\nconnect to GND for SENT / PWM interface"
    },
    {
      "number": "2",
      "name": "IF2",
      "description": "address coding for programming in bus mode,\n(see Table 4-5)\nconnect to GND for SENT / PWM interface"
    },
    {
      "number": "3",
      "name": "IF3",
      "description": "connect to IFC"
    },
    {
      "number": "4",
      "name": "VDD",
      "description": "supply voltage, positive"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "supply voltage, ground"
    },
    {
      "number": "6",
      "name": "IFA",
      "description": "connect to GND."
    },
    {
      "number": "7",
      "name": "IFB",
      "description": "SENT / SPC / PWM / SICI interface"
    },
    {
      "number": "8",
      "name": "IFC",
      "description": "address coding for programming in bus mode,\n(see Table 4-5)\nconnect to IF3"
    },
    {
      "number": "9-16",
      "name": "-",
      "description": "n.c."
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE5014C_P_S-DataSheet-v01_00-EN.pdf?fileId=5546d46276fb756a01771a9695b43a08",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567de"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bme280",
  "pages": "38",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "2",
      "name": "CSB",
      "description": "Chip Select. SPI 4-Wire: CSB. SPI 3-Wire: CSB. I2C: VDDIO"
    },
    {
      "number": "3",
      "name": "SDI",
      "description": "Serial data input. SPI 4-Wire: SDI. SPI 3-Wire: SDI/SDO. I2C: SDA"
    },
    {
      "number": "4",
      "name": "SCK",
      "description": "Serial clock input. SPI 4-Wire: SCK. SPI 3-Wire: SCK. I2C: SCL"
    },
    {
      "number": "5",
      "name": " SDO",
      "description": "Serial data output. SPI 4-Wire: SDO. SPI 3-Wire: DNC. I2C: GND for default address"
    },
    {
      "number": "6",
      "name": "VDDIO",
      "description": "Digital / Interface supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Analog supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567df"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLV493D-A2BW",
  "pages": "5",
  "pins": [
    {
      "number": "A1",
      "name": "/INT",
      "description": "Interrupt pin, signals a finished measurement cycle1) (output), open-drain"
    },
    {
      "number": "A3",
      "name": "SDA",
      "description": "Interface serial data pin (input/output), open-drain"
    },
    {
      "number": "B2",
      "name": "SCL",
      "description": "Interface serial clock pin (input)"
    },
    {
      "number": "C1",
      "name": "GND",
      "description": "Ground pin"
    },
    {
      "number": "C3",
      "name": "VDD",
      "description": "Supply pin"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLV493D-A2BW-DataSheet-v01_00-EN.pdf?fileId=5546d46278d64ffd0178efd9e2c66db9",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567e0"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bmp384",
  "pages": "45",
  "pins": [
    {
      "number": "1",
      "name": "VDDIO",
      "description": "Digital interface supply"
    },
    {
      "number": "2",
      "name": "SCK",
      "description": "Serial clock input."
    },
    {
      "number": "3",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "SDI",
      "description": "Serial data input."
    },
    {
      "number": "5",
      "name": "SDO",
      "description": "Serial data output."
    },
    {
      "number": "6",
      "name": "CSB",
      "description": "Chip select"
    },
    {
      "number": "7",
      "name": "INT",
      "description": "INT output"
    },
    {
      "number": "8",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "9",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "10",
      "name": "VDD",
      "description": "Analog supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp384-ds003.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567e1"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4968-1M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4968-1M-DataSheet-v01_20-EN.pdf?fileId=db3a304340155f3d01402f99caaa27d1",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567e2"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_ICS-40300",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "OUTPUT",
      "description": "Analog Output Signal"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sw_piezo/mic/mems-mic/data_sheet/ds-ics-40300-00-v1.3.pdf",
  "version": "1.3"
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567e3"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_ism330is",
  "pages": "8",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-wire interface serial data output (SDO), I2C least significant bit of the device address (SA0)"
    },
    {
      "number": "2",
      "name": "MSDA",
      "description": "Mode 1: Connect to Vdd_IO or GND, Mode 2: I2C serial data master (MSDA)"
    },
    {
      "number": "3",
      "name": "MSCL",
      "description": "Mode 1: Connect to Vdd_IO or GND, Mode 2: I2C serial clock master (MSCL)"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt 1"
    },
    {
      "number": "5",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Mode 1: Programmable interrupt 2, Mode 2: Programmable interrupt 2 (INT2), I2C master external synchronization signal (MDRDY)"
    },
    {
      "number": "10",
      "name": "RES",
      "description": "Leave unconnected"
    },
    {
      "number": "11",
      "name": "RES",
      "description": "Connect to Vdd_IO or leave unconnected"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/ism330is.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567e4"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lis2duxs12",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C/MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI/I2C/MIPI I3C mode selection (1: SPI idle mode / I2C/MIPI I3C enabled; 0: SPI enabled / I2C/MIPI I3C disabled)"
    },
    {
      "number": "3",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C/MIPI I3C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to VDD, VDDIO, or GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "RES/EXT_CLK",
      "description": "Connect to GND if not used as interrupt pin 1, External clock for synchronization of multiple sensors"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2. Clock input when selected in one-shot mode. AH input 2 (or Qvar electrode 2) is connected if the analog hub (or Qvar functionality) is enabled."
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1.  AH input 1 (or Qvar electrode 1) is connected if the analog hub (or Qvar functionality) is enabled."
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lis2duxs12.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567e5"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lis2dux12",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C/MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI/I2C/MIPI I3C mode selection (1: SPI idle mode / I2C/MIPI I3C enabled; 0: SPI enabled / I2C/MIPI I3C disabled)"
    },
    {
      "number": "3",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C/MIPI I3C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to VDD, VDDIO, or GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "RES/EXT_CLK",
      "description": "Connect to GND if not used as interrupt pin 1, External clock for synchronization of multiple sensors"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2. Clock input when selected in one-shot mode"
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lis2dux12.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567e7"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_ICS-40212",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "OUTPUT",
      "description": "Analog Output Signal"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Power Supply"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sw_piezo/mic/mems-mic/data_sheet/ds-000126-ics-40212-v1.3.pdf",
  "version": "1.3"
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567e8"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE49SRI3",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "n.c.",
      "description": "Not connected"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "VDD",
      "description": "Supply voltage / PSI5 interface / programming interface"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE49SRI3-DataSheet-v01_00-EN.pdf?fileId=8ac78c8c90530b3a01912c1b13583143",
  "version": "1.00"
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567e9"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bmi260",
  "pages": "2",
  "pins": [
    {
      "number": "1",
      "name": "SDO",
      "description": "Serial data output in SPI 4-Wire"
    },
    {
      "number": "2",
      "name": "ASDX",
      "description": "Aux interface / OIS interface"
    },
    {
      "number": "3",
      "name": "ASCX",
      "description": "Aux interface / OIS interface"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Interrupt pin 1"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage (1.2V ...3.6V)"
    },
    {
      "number": "6",
      "name": "GNDIO",
      "description": "Ground for I/O"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground for digital & analog"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply analog & digital domain (1.71 - 3.6V)"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Interrupt pin 2"
    },
    {
      "number": "10",
      "name": "OCSB",
      "description": "OIS interface"
    },
    {
      "number": "11",
      "name": "OSDO",
      "description": "OIS interface"
    },
    {
      "number": "12",
      "name": "CSB",
      "description": "Chip select for SPI mode"
    },
    {
      "number": "13",
      "name": "SCX",
      "description": "SPI/I2C serial clock (SCK/SCL)"
    },
    {
      "number": "14",
      "name": "SDX",
      "description": "Serial data I/O"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/product_flyer/bst-bmi260-fl000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567ea"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1506SU",
  "pages": "14",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_sot23_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567eb"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP256",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "NCS",
      "description": "Not-Chip-Select (active-low)"
    },
    {
      "number": "2",
      "name": "CLK",
      "description": "Serial Clock"
    },
    {
      "number": "3",
      "name": "SDI",
      "description": "Serial Data In"
    },
    {
      "number": "4",
      "name": "SDO",
      "description": "Serial Data Out"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "VPROG",
      "description": "Programming Voltage"
    },
    {
      "number": "7",
      "name": "NC",
      "description": "Not Connected"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP256-DS-v01_01-EN.pdf?fileId=5546d46254e133b401557355c111643e",
  "version": "1.1"
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567ec"
  },
  "flag": "old",
  "manufacturer": "Murata",
  "name": "SCA100T",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "SCK",
      "description": "Serial clock"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "No connect, left floating"
    },
    {
      "number": "3",
      "name": "MISO",
      "description": "Master in slave out; data output"
    },
    {
      "number": "4",
      "name": "MOSI",
      "description": "Master out slave in; data input"
    },
    {
      "number": "5",
      "name": "Out_2",
      "description": "Y axis Output (Ch 2)"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "7",
      "name": "CSB",
      "description": "Chip select (active low)"
    },
    {
      "number": "8",
      "name": "NC",
      "description": "No connect, left floating"
    },
    {
      "number": "9",
      "name": "ST_2",
      "description": "Self test input for Ch 2"
    },
    {
      "number": "10",
      "name": "ST_1",
      "description": "Self test input for Ch 1"
    },
    {
      "number": "11",
      "name": "Out_1",
      "description": "Self test input for Ch 2"
    },
    {
      "number": "12",
      "name": "VDD",
      "description": "Positive supply voltage (+5V DC)"
    }
  ],
  "type": "sensor",
  "url": "https://www.murata.com/-/media/webrenewal/products/sensor/inclinometer/sca100t/sca100t_inclinometer_datasheet_8261800b2_0.ashx?la=en-us",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567ed"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1565SU",
  "pages": "13",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply and output"
    },
    {
      "number": "2",
      "name": "AUX",
      "description": "Functional test pin, connection to ground is recommended"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_156y_hall-effect_switches_with_current_interface_2-wire_in_sot23_package.pdf",
  "version": "4"
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567ee"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4961-3M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4961-3M-DataSheet-v01_02-EN.pdf?fileId=db3a304338ec6d390138fc7ad91376ac",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567ef"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_h3lis100dl",
  "pages": "8",
  "pins": [
    {
      "number": "1",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "3",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "4",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "6",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "7",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "8",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (1: I2C mode; 0: SPI enabled)"
    },
    {
      "number": "9",
      "name": "INT_2",
      "description": "Inertial interrupt 2"
    },
    {
      "number": "10",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "11",
      "name": "INT_1",
      "description": "Inertial interrupt 1"
    },
    {
      "number": "12",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "13",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "14",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "15",
      "name": "Reserved",
      "description": "Connect to VDD"
    },
    {
      "number": "16",
      "name": "GND",
      "description": "0 V supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/h3lis100dl.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567f0"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAC830UP",
  "pages": "23",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply Voltage and Programming Pin"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Push-Pull Output and Selection Pin"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/linear/linear-hall/data_sheet/hac830_linear_hall-effect_sensor_with_integrated_capacitors_1dsh.pdf",
  "version": "2"
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567f1"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_ais2ih",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (1: SPI idel mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to VDD, VDDIO, or GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2. Clock input when selected in single data conversion on demand."
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/ais2ih.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567f2"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lis3dhh",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "SPC",
      "description": "Clock line for SPI 4-Wire interface (SPC)"
    },
    {
      "number": "2",
      "name": "SDI",
      "description": "Serial data input (SDI) line for SPI 4-Wire interface"
    },
    {
      "number": "3",
      "name": "SDO",
      "description": "Serial data output (SDO) line for SPI 4-Wire interface"
    },
    {
      "number": "4",
      "name": "CS",
      "description": "SPI chip-select line (CS)"
    },
    {
      "number": "5",
      "name": "INT2",
      "description": "Programmable interrupt 2 generated according to a configurable FIFO threshold in a dedicated register"
    },
    {
      "number": "6",
      "name": "INT1",
      "description": "Programmable interrupt 1 generated according to a configurable FIFO threshold in a dedicated register"
    },
    {
      "number": "7",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins, Recommended power supply decoupling capacitor (100 nF)"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply, Recommended power supply decoupling capacitors (100 nF ceramic in parallel with 10 µF aluminum)\n"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "11",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "12",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "13",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "14",
      "name": "Reserved",
      "description": "Connect to GND or leave unconnected"
    },
    {
      "number": "15",
      "name": "Reserved",
      "description": "Connect to GND or leave unconnected"
    },
    {
      "number": "16",
      "name": "Reserved",
      "description": "Connect to GND or leave unconnected"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lis3dhh.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567f4"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bma580",
  "pages": "183",
  "pins": [
    {
      "number": "1",
      "name": "VSS",
      "description": "Ground (VSS=GND=GNDIO)"
    },
    {
      "number": "2",
      "name": "INT1",
      "description": "Interrupt pin 1. SPI 4-Wire: SDO/MISO. SPI 3-Wire: INT1. I2C/I3C: INT1"
    },
    {
      "number": "3",
      "name": "INT2",
      "description": "Interrupt pin 2. SPI 4-Wire: CSB. SPI 3-Wire: CSB. I2C/I3C: INT2* (or VDD, if unused)"
    },
    {
      "number": "4",
      "name": "SDA",
      "description": "Serial Data. SPI 4-Wire: SDI/MOSI. SPI 3-Wire: SDX. I2C/I3C: SDA"
    },
    {
      "number": "5",
      "name": "SCL",
      "description": "Serial Clock. SPI 4-Wire: SCK. SPI 3-Wire: SCK. I2C/I3C: SCL"
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Power supply analog & digital domain and digital I/O 1.62V ...3.63V (VDD=VDDIO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma580-ds000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567f5"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4961-1M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4961-1M-DataSheet-v01_02-EN.pdf?fileId=db3a304338e5bb6e0138e7c1d93c0261",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567f6"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP276D1201",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "NCS",
      "description": "Not-Chip-Select (active-low)"
    },
    {
      "number": "2",
      "name": "CLK",
      "description": "Serial Clock"
    },
    {
      "number": "3",
      "name": "SDI",
      "description": "Serial Data In"
    },
    {
      "number": "4",
      "name": "SDO",
      "description": "Serial Data Out"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "SENTOUT",
      "description": "SENT output"
    },
    {
      "number": "7",
      "name": "NTCIN",
      "description": "NTC Input"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP276D1201-DataSheet-v01_00-EN.pdf?fileId=8ac78c8c7d0d8da4017d0fd7eeeb2fe1",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567f7"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bmm350",
  "pages": "23",
  "pins": [
    {
      "number": "A1",
      "name": "INT",
      "description": "Interrupt output"
    },
    {
      "number": "A2",
      "name": "SDA",
      "description": "I2C / I3C data"
    },
    {
      "number": "A3",
      "name": "SCK",
      "description": "I2C / I3C clock"
    },
    {
      "number": "B1",
      "name": "GND",
      "description": "Analog, digital and IO ground"
    },
    {
      "number": "B2",
      "name": "ADSEL",
      "description": "The logic status of ADSEL defines the LSB to the I2C legacy address. Connect ADSEL to GND or VDDIO"
    },
    {
      "number": "B3",
      "name": "VDDIO",
      "description": "IO supply, use decoupling capacitor"
    },
    {
      "number": "C1",
      "name": "VDD",
      "description": "Digital analog supply, use decoupling capacitor"
    },
    {
      "number": "C2",
      "name": "CRST",
      "description": "Connect to external 2.2uf capacitor, low inductance."
    },
    {
      "number": "C3",
      "name": "BYPASS",
      "description": "Connect to ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmm350-ds00.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567f9"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bmp388",
  "pages": "46",
  "pins": [
    {
      "number": "1",
      "name": "VDDIO",
      "description": "Digital interface supply"
    },
    {
      "number": "2",
      "name": "SCK",
      "description": "Serial clock input"
    },
    {
      "number": "3",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "SDI",
      "description": "Serial data input."
    },
    {
      "number": "5",
      "name": "SDO",
      "description": "Serial data output."
    },
    {
      "number": "6",
      "name": "CSB",
      "description": "Chip select"
    },
    {
      "number": "7",
      "name": "INT",
      "description": "INT output"
    },
    {
      "number": "8",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "9",
      "name": "VSS",
      "description": "Ground"
    },
    {
      "number": "10",
      "name": "VDD",
      "description": "Analog supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp388-ds001.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567fa"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1880UA",
  "pages": "20",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply Voltage Pin"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Push-Pull Output"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/linear/linear-hall/data_sheet/hal_1880_programmable_linear_hall-effect_sensor_in_to92ua_package.pdf",
  "version": "4"
},
{
  "_id": {
    "$oid": "680f973d1bfffd9e419567fb"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_vl6180x",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "GPIO1",
      "description": "Interrupt output. Open-drain. If used, it should be pulled high with 47 kOhm resistor, otherwise left unconnected."
    },
    {
      "number": "2",
      "name": "NC",
      "description": "No connect"
    },
    {
      "number": "3",
      "name": "NC",
      "description": "No connect"
    },
    {
      "number": "4",
      "name": "GPIO0/CE",
      "description": "Power-up default is chip enable (CE). It should be pulled high with a 47 kOhm resistor."
    },
    {
      "number": "5",
      "name": "SCL",
      "description": "I2C serial clock"
    },
    {
      "number": "6",
      "name": "SDA",
      "description": "I2C serial data"
    },
    {
      "number": "7",
      "name": "NC",
      "description": "No connect"
    },
    {
      "number": "8",
      "name": "AVDD_VCSEL",
      "description": "VCSEL power supply. 2.6 to 3.0 V"
    },
    {
      "number": "9",
      "name": "AVSS_VCSEL",
      "description": "VCSEL ground"
    },
    {
      "number": "10",
      "name": "AVDD",
      "description": "Digital/analog power supply. 2.6 to 3.0 V"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "No connect"
    },
    {
      "number": "12",
      "name": "GND",
      "description": "Digital/analog ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/vl6180x.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e419567fc"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_ICS-43432",
  "pages": "8",
  "pins": [
    {
      "number": "1",
      "name": "LR",
      "description": "Left/Right channel select. When set low, the microphone outputs its signal in the left channel of the I²S frame. When set high, the microphone outputs its signal in the right channel."
    },
    {
      "number": "2",
      "name": "CONFIG",
      "description": "Pull to ground. The state of this pin is used at power‐up."
    },
    {
      "number": "3",
      "name": "VDD",
      "description": "Power, 1.62 to 3.63 V. This pin should be decoupled to GND with a 0.1 μF capacitor."
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Ground. Connect to ground on the PCB."
    },
    {
      "number": "5",
      "name": "WS",
      "description": "Serial Data‐Word Select for I²S Interface"
    },
    {
      "number": "6",
      "name": "SCK",
      "description": "Serial Data Clock for I²S Interface"
    },
    {
      "number": "7",
      "name": "SD",
      "description": "Serial Data Output for I²S Interface. This pin tri‐states when not actively driving the appropriate output channel. The SD trace should have a 100 kΩ pulldown resistor to discharge the line during the time that all microphones on the bus have tri‐stated their outputs."
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sw_piezo/mic/mems-mic/data_sheet/ics-43432-data-sheet-v1.3.pdf",
  "version": "1.3"
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e419567fd"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4966V-1G",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "Q2",
      "description": "Speed"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Recommended connection to GND"
    },
    {
      "number": "3",
      "name": "Q1",
      "description": "Direction"
    },
    {
      "number": "4",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Recommended connection to GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4966V-1G-DataSheet-v01_00-EN.pdf?fileId=5546d4626b2d8e69016b512464fc0e06",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e419567fe"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP466",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "NCS",
      "description": "Not-Chip-Select (active-low)"
    },
    {
      "number": "2",
      "name": "CLK",
      "description": "Serial Clock"
    },
    {
      "number": "3",
      "name": "SDI",
      "description": "Serial Data In"
    },
    {
      "number": "4",
      "name": "SDO",
      "description": "Serial Data Out"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "VPROG",
      "description": "Programming Voltage"
    },
    {
      "number": "7",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP466-DataSheet-v01_20-EN.pdf?fileId=8ac78c8c88ae21230188bf7fe19111df",
  "version": "1.20"
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e419567ff"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "SP490-01-12",
  "pages": "23",
  "pins": [
    {
      "number": "1",
      "name": "PP0/SCL/A_IN/A_OUT / F_IN",
      "description": "General Purpose IO / I2C-SCL / Analog ADC Input /Analog Accelerometer or Pressure\nSensor Output / External Reference Frequency Input"
    },
    {
      "number": "2",
      "name": "PP1/SDA/WAKEUP",
      "description": "General Purpose IO / I2C-SDA / External Wake-Up(*)"
    },
    {
      "number": "3",
      "name": "PP2/SWDCLK/WAKEUP",
      "description": "General Purpose IO / Serial Wire Debug Interface Clock/ External Wake-Up(*)"
    },
    {
      "number": "4",
      "name": "GNDD",
      "description": "Digital Ground"
    },
    {
      "number": "5",
      "name": "PP3 / SWDIO /A_IN",
      "description": "General Purpose IO / Serial Wire Debug Interface Input Output/ Analog ADC Input"
    },
    {
      "number": "6",
      "name": "XIN",
      "description": "Crystal Oscillator Input"
    },
    {
      "number": "7",
      "name": "XOUT",
      "description": "Crystal Oscillator Output"
    },
    {
      "number": "8",
      "name": "LFN",
      "description": "LF Receiver Input"
    },
    {
      "number": "9",
      "name": "LFP",
      "description": "LF Receiver Input"
    },
    {
      "number": "10",
      "name": "VDDREG",
      "description": "Internal Regulated Power Supply"
    },
    {
      "number": "11",
      "name": "GNDA",
      "description": "Analog and Power amplifier Ground"
    },
    {
      "number": "12",
      "name": "PAOUT",
      "description": "RF Power Amplifier Output"
    },
    {
      "number": "13",
      "name": "VDDPA/A_OUT",
      "description": "Regulated Power Supply for RF Power Amplifier / Analog Accelerometer or\nPressure Output"
    },
    {
      "number": "14",
      "name": "VDDBAT",
      "description": "Power Supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-SP490-01-12-DataSheet-v01_00-EN.pdf?fileId=8ac78c8c901008d101901278c31603ce",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e41956800"
  },
  "flag": "old",
  "manufacturer": "Texas Instruments",
  "name": "ti_LMK61PD0A2",
  "pages": "4",
  "pins": [
    {
      "number": "3",
      "name": "GND",
      "description": "Device Ground."
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "3.3 V Power Supply."
    },
    {
      "number": "4",
      "name": "OUTP",
      "description": "Differential Output Pair (LVPECL, LVDS or HCSL)."
    },
    {
      "number": "5",
      "name": "OUTN",
      "description": "Differential Output Pair (LVPECL, LVDS or HCSL)."
    },
    {
      "number": "7",
      "name": "FS1",
      "description": "Output Frequency Select. Refer to Table 1."
    },
    {
      "number": "8",
      "name": "FS0",
      "description": "Output Frequency Select. Refer to Table 1."
    },
    {
      "number": "1",
      "name": "OE",
      "description": "Output Enable (internal pullup). Refer to Table 2."
    },
    {
      "number": "3",
      "name": "OS",
      "description": "Output Type Select. Refer to Table 2."
    }
  ],
  "type": "sensor",
  "url": "https://www.ti.com/lit/ds/symlink/lmk61pd0a2.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e41956801"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLI4963-2M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLI4963-2M-DataSheet-v01_20-EN.pdf?fileId=5546d462525dbac4015287eddf3f27cd",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e41956802"
  },
  "flag": "old",
  "manufacturer": "Texas Instruments",
  "name": "ti_TLV320AIC3104",
  "pages": "5-6",
  "pins": [
    {
      "number": "25",
      "name": "AVDD",
      "description": "Analog DAC voltage supply, 2.7 V–3.6 V"
    },
    {
      "number": "17",
      "name": "AVSS1",
      "description": "Analog ADC ground supply, 0 V"
    },
    {
      "number": "26",
      "name": "AVSS2",
      "description": "Analog DAC ground supply, 0 V"
    },
    {
      "number": "2",
      "name": "BCLK",
      "description": "Audio serial data bus bit clock input/output"
    },
    {
      "number": "4",
      "name": "DIN",
      "description": "Audio serial data bus data input"
    },
    {
      "number": "5",
      "name": "DOUT",
      "description": "Audio serial data bus data output"
    },
    {
      "number": "18",
      "name": "DRVDD",
      "description": "Analog ADC and output driver voltage supply, 2.7 V–3.6 V"
    },
    {
      "number": "24",
      "name": "DRVDD",
      "description": "Analog output driver voltage supply, 2.7 V–3.6 V"
    },
    {
      "number": "21",
      "name": "DRVSS",
      "description": "Analog output driver ground supply, 0 V"
    },
    {
      "number": "32",
      "name": "DVDD",
      "description": "Digital core voltage supply, 1.525 V–1.95 V"
    },
    {
      "number": "6",
      "name": "DVSS",
      "description": "Digital core, I/O ground supply, 0 V"
    },
    {
      "number": "20",
      "name": "HPLCOM",
      "description": "High-power output driver (left – or multi-functional)"
    },
    {
      "number": "19",
      "name": "HPLOUT",
      "description": "High-power output driver (left +)"
    },
    {
      "number": "22",
      "name": "HPRCOM",
      "description": "High-power output driver (right – or multi-functional)"
    },
    {
      "number": "23",
      "name": "HPROUT",
      "description": "High-power output driver (right +)"
    },
    {
      "number": "7",
      "name": "IOVDD",
      "description": "Digital I/O voltage supply, 1.1 V–3.6 V"
    },
    {
      "number": "28",
      "name": "LEFT_LOM",
      "description": "Left line output (–)"
    },
    {
      "number": "27",
      "name": "LEFT_LOP",
      "description": "Left line output (+)"
    },
    {
      "number": "1",
      "name": "MCLK",
      "description": "Master clock input"
    },
    {
      "number": "11",
      "name": "MIC1LM/LINE1LM",
      "description": "Left input – (diff only)"
    },
    {
      "number": "10",
      "name": "MIC1LP/LINE1LP",
      "description": "Left input 1 (SE) or left input + (diff)"
    },
    {
      "number": "13",
      "name": "MIC1RM/LINE1RM",
      "description": "Right input – (diff only)"
    },
    {
      "number": "12",
      "name": "MIC1RP/LINE1RP",
      "description": "Right input 1 (SE) or right input + (diff)"
    },
    {
      "number": "14",
      "name": "MIC2L/LINE2L/MICDET",
      "description": "Left input 2 (SE); can support microphone detection"
    },
    {
      "number": "16",
      "name": "MIC2R/LINE2R",
      "description": "Right input 2 (SE)"
    },
    {
      "number": "15",
      "name": "MICBIAS",
      "description": "Microphone bias voltage output"
    },
    {
      "number": "31",
      "name": "RESET",
      "description": "Reset"
    },
    {
      "number": "30",
      "name": "RIGHT_LOM",
      "description": "Right line output (–)"
    },
    {
      "number": "29",
      "name": "RIGHT_LOP",
      "description": "Right line output (+)"
    },
    {
      "number": "8",
      "name": "SCL",
      "description": "I²C serial clock input"
    },
    {
      "number": "9",
      "name": "SDA",
      "description": "I²C serial data input/output"
    },
    {
      "number": "3",
      "name": "WCLK",
      "description": "Audio serial data bus word clock input/output"
    }
  ],
  "type": "sensor",
  "url": "https://www.ti.com/lit/ds/symlink/tlv320aic3104.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e41956803"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1506UA",
  "pages": "15",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_to92_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e41956804"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_ism330dlc",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-wire interface serial data output (SDO), I2C least significant bit of the device address (SA0)"
    },
    {
      "number": "2",
      "name": "SDx",
      "description": "Mode 1: Connect to VDDIO or GND, Mode 2: I2C serial data master (MSDA), Mode 3/4: Auxiliary SPI 3/4-wire interface serial data input (SDI) and SPI 3-wire serial data output (SDO)"
    },
    {
      "number": "3",
      "name": "SCx",
      "description": "Mode 1: Connect to VDDIO or GND, Mode 2: I2C serial clock master (MSCL), Mode 3/4: Auxiliary SPI (3/4-wire) interface serial port clock (SPC_Aux)"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt 1"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Mode 1: Programmable interrupt 2 (INT2) / Data enable (DEN), Mode 2: Programmable interrupt 2 (INT2) / Data enable (DEN)/ I2C master external synchronization signal (MDRDY), Mode 3/4: Programmable interrupt 2 (INT2) / Data enable (DEN)"
    },
    {
      "number": "10",
      "name": "OCS_Aux",
      "description": "Mode 1: Leave unconnected, Mode 2: Leave unconnected, Mode 3/4: Enables auxiliary SPI 3/4-wire interface"
    },
    {
      "number": "11",
      "name": "SDO_Aux",
      "description": "Mode 1: Connect to VDD_IO or leave unconnected, Mode 2: Connect to VDD_IO or leave unconnected, Mode 3/4: Auxiliary SPI 3-wire interface: leave unconnected(2), Auxiliary SPI 4-wire interface: serial data output (SDO_Aux)"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/ism330dlc.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e41956805"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP236N6165",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "TEST",
      "description": "Test pin"
    },
    {
      "number": "2",
      "name": "CLOCK / VPROG ",
      "description": "External clock for communication / programming voltage"
    },
    {
      "number": "3",
      "name": "DATA IN",
      "description": "Serial data input pin"
    },
    {
      "number": "4",
      "name": "DATA OUT",
      "description": "Serial data output pin"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Circuit ground potential"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Analog pressure signal output"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Circuit ground potential"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP236_N6165-DS-v01_00-en.pdf?fileId=db3a30432ad629a6012af68133600b1a",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e41956806"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1565UA",
  "pages": "14",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply and output"
    },
    {
      "number": "3",
      "name": "AUX",
      "description": "Functional test pin, connection to ground is recommended"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_156y_hall-effect_switch_with_current_interface_2-wire_in_to92_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e41956807"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lis2dw12",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "Enable SPI, I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to VDD, VDDIO, or GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2",
      "description": "Interrupt pin 2. Clock input when selected in single data conversion on demand."
    },
    {
      "number": "12",
      "name": "INT1",
      "description": "Interrupt pin 1"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lis2dw12.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e41956808"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP229E2701",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "TEST",
      "description": "Test pin"
    },
    {
      "number": "2",
      "name": "CLOCK / VPROG",
      "description": "External clock for communication / programming voltage"
    },
    {
      "number": "3",
      "name": "DATA IN",
      "description": "Serial data input pin"
    },
    {
      "number": "4",
      "name": "DATA OUT",
      "description": "Serial data output pin"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Circuit ground potential"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Analog pressure signal output"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Circuit ground potential"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP229E2701-DS-v01_00-en.pdf?fileId=db3a30432ad629a6012af6bce0290b5d",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e4195680a"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1510SU",
  "pages": "14",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_sot23_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e4195680b"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bmp585",
  "pages": "45",
  "pins": [
    {
      "number": "1",
      "name": "SCX",
      "description": "I2C Serial clock, SPI Serial clock"
    },
    {
      "number": "2",
      "name": "SDX",
      "description": "I2C Serial data, SPI Serial data input (4-wire), SPI Serial data IO (3-wire)"
    },
    {
      "number": "3",
      "name": "SDO",
      "description": "I2C Slave address LSB, SPI Serial data output (4-wire)"
    },
    {
      "number": "4",
      "name": "VDDIO",
      "description": "Digital interface power supply"
    },
    {
      "number": "5",
      "name": "INT",
      "description": "Interrupt or data ready"
    },
    {
      "number": "6",
      "name": "VSSIO/VSS",
      "description": "Ground"
    },
    {
      "number": "7",
      "name": "CSB",
      "description": "Chip select for SPI (Low Active)"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Analog power supply"
    },
    {
      "number": "9",
      "name": "L/M Pad",
      "description": "Lasermarking"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp585-ds003.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e4195680c"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1502SU",
  "pages": "15",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_to92_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e4195680d"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1561SU",
  "pages": "13",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply and output"
    },
    {
      "number": "2",
      "name": "AUX",
      "description": "Functional test pin, connection to ground is recommended"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_156y_hall-effect_switches_with_current_interface_2-wire_in_sot23_package.pdf",
  "version": "4"
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e4195680e"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bme680",
  "pages": "44",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "2",
      "name": "CSB",
      "description": "Chip Select. SPI 4-Wire: CSB. SPI 3-Wire: CSB. I2C: VDDIO"
    },
    {
      "number": "3",
      "name": "SDI",
      "description": "Serial data input. SPI 4-Wire: SDI. SPI 3-Wire: SDI/SDO. I2C: SDA"
    },
    {
      "number": "4",
      "name": "SCK",
      "description": "Serial clock input. SPI 4-Wire: SCK. SPI 3-Wire: SCK. I2C: SCL"
    },
    {
      "number": "5",
      "name": "SDO",
      "description": "Serial data output. SPI 4-Wire: SDO. SPI 3-Wire: DNC. I2C: GND for default address"
    },
    {
      "number": "6",
      "name": "VDDIO",
      "description": "Digital / Interface supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Analog supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme680-ds001.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e4195680f"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_IAM-20380",
  "pages": "16",
  "pins": [
    {
      "number": "1",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage"
    },
    {
      "number": "2",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL); SPI serial clock (SPC)"
    },
    {
      "number": "3",
      "name": "SDA/SDI",
      "description": "I2C serial data (SDA); SPI serial data input (SDI)"
    },
    {
      "number": "4",
      "name": "SA0/SDO",
      "description": "I2C slave address LSB (SA0); SPI serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "CS",
      "description": "Chip select (0 = SPI mode; 1 = I2C mode)"
    },
    {
      "number": "6",
      "name": "INT",
      "description": "Interrupt digital output (totem pole or open-drain)"
    },
    {
      "number": "7",
      "name": "RESV",
      "description": "Reserved. Do not connect."
    },
    {
      "number": "8",
      "name": "FSYNC",
      "description": "Synchronization digital input (optional). Connect to GND if unused."
    },
    {
      "number": "9",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "10",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "11",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "12",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "13",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "14",
      "name": "REGOUT",
      "description": "Regulator filter capacitor connection"
    },
    {
      "number": "15",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "16",
      "name": "VDD",
      "description": "Power Supply"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/gyro/data_sheet/ds-000195-iam-20380_v1.0-typ.pdf",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e41956811"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_vl53l1cb",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "AVDDVCSEL",
      "description": "VCSEL supply, to be connected to main supply"
    },
    {
      "number": "2",
      "name": "AVSSVCSEL",
      "description": "VCSEL ground, to be connected to main ground\n"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "To be connected to the main ground"
    },
    {
      "number": "4",
      "name": "GND2",
      "description": "To be connected to the main ground"
    },
    {
      "number": "5",
      "name": "XSHUT",
      "description": "Xshutdown pin, active low"
    },
    {
      "number": "6",
      "name": "GND3",
      "description": "To be connected to the main ground"
    },
    {
      "number": "7",
      "name": "GPIO1",
      "description": "Interrupt output. Open drain output"
    },
    {
      "number": "8",
      "name": "DNC",
      "description": "Do not connect, must be left floating"
    },
    {
      "number": "9",
      "name": "SDA",
      "description": "I2C serial data"
    },
    {
      "number": "10",
      "name": "SCL",
      "description": "I2C serial clock input"
    },
    {
      "number": "11",
      "name": "AVDD",
      "description": "Supply, connect to the main supply"
    },
    {
      "number": "12",
      "name": "GND4",
      "description": "Connect to the main ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/vl53l1.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e41956812"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_AXO301",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "14",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "15",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "16",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "20",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "25",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "27",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "28",
      "name": "GND",
      "description": "Power Ground"
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "26",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "24",
      "name": "MISO",
      "description": "Master Input Slave Output signal"
    },
    {
      "number": "23",
      "name": "MOSI",
      "description": "Master Output Slave Input signal"
    },
    {
      "number": "22",
      "name": "SCLK",
      "description": "SPI clock signal"
    },
    {
      "number": "21",
      "name": "SSB",
      "description": "Slave Selection signal. Active low"
    },
    {
      "number": "19",
      "name": "DRY",
      "description": "Data Ready flag. Generates a pulse when a new acceleration data is available"
    },
    {
      "number": "18",
      "name": "VDDIO",
      "description": "Reference voltage for the SPI signals and DRY, RSTB wires"
    },
    {
      "number": "17",
      "name": "RSTB",
      "description": "Reset. Reloads the internal calibration data. Active low"
    },
    {
      "number": "13",
      "name": "ST",
      "description": "Self-test status high when the sensor is properly operating"
    },
    {
      "number": "4",
      "name": "EN",
      "description": "Enable command. Active high."
    },
    {
      "number": "2",
      "name": "LVREF",
      "description": "External decoupling pad. MUST be connected to the board's GND through a 100µF external capacitor, in order to ensure low noise."
    },
    {
      "number": "3",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    },
    {
      "number": "10",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    },
    {
      "number": "11",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    },
    {
      "number": "12",
      "name": "DNC",
      "description": "Do Not electrically Connect. These pins provide additional mechanical fixing to the board and should be soldered to an unconnected pad."
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/accelero/data_sheet/axo301_datasheet.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e41956813"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bma456",
  "pages": "87",
  "pins": [
    {
      "number": "1",
      "name": "SDO",
      "description": "Serial data output in SPI. Address select in I2C mode"
    },
    {
      "number": "2",
      "name": "SDX",
      "description": "SDA serial data I/O in I2C. SDI serial data input in SPI 4W. SDA serial data I/O in SPI 3W"
    },
    {
      "number": "3",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage (1.2V ...3.6V)"
    },
    {
      "number": "4",
      "name": "ASDA",
      "description": "Serial data I/O - Secondary Interface (I2C Master for Magnetometer)"
    },
    {
      "number": "5",
      "name": "INT1",
      "description": "Interrupt output 1 (default). (Input for external FIFO sync) *"
    },
    {
      "number": "6",
      "name": "INT2",
      "description": "Interrupt output 2 (default). (Input for external FIFO sync) *"
    },
    {
      "number": "7",
      "name": "VDD",
      "description": "Power supply for analog & digital domain (1.62V ...3.6V)"
    },
    {
      "number": "8",
      "name": "GNDIO",
      "description": "Ground for I/O"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "Ground for digital & analog"
    },
    {
      "number": "10",
      "name": "CSB",
      "description": "Chip select for SPI mode. I2C: VDDIO"
    },
    {
      "number": "11",
      "name": "ASCL",
      "description": "Digital clock (out) - Secondary Interface (I2C Master for Magnetometer)"
    },
    {
      "number": "12",
      "name": "SCX",
      "description": "SCK for SPI serial clock. SCL for I2C serial clock"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma456-ds000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e41956814"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1502UA",
  "pages": "15",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_to92_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e41956816"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_mp23db02mm",
  "pages": "2",
  "pins": [
    {
      "number": "1",
      "name": "DOUT",
      "description": "Left/right PDM data output"
    },
    {
      "number": "2",
      "name": "L/R",
      "description": "Left/right channel selection"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "4",
      "name": "CLK",
      "description": "Synchronization input clocks"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/mp23db02mm.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e41956817"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_h3lis331dl",
  "pages": "3",
  "pins": [
    {
      "number": "1",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "3",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "4",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "6",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "7",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "8",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (1: I2C mode; 0: SPI enabled)"
    },
    {
      "number": "9",
      "name": "INT_2",
      "description": "Inertial interrupt 2"
    },
    {
      "number": "10",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "11",
      "name": "INT_1",
      "description": "Inertial interrupt 1"
    },
    {
      "number": "12",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "13",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "14",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "15",
      "name": "Reserved",
      "description": "Connect to VDD"
    },
    {
      "number": "16",
      "name": "GND",
      "description": "0 V supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/h3lis331dl.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e41956818"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP229F3519",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "TEST",
      "description": "Test pin"
    },
    {
      "number": "2",
      "name": "CLOCK / VPROG",
      "description": "External clock for communication / programming\nvoltage"
    },
    {
      "number": "3",
      "name": "DATA IN",
      "description": "Serial data input pin"
    },
    {
      "number": "4",
      "name": "DATA OUT",
      "description": "Serial data output pin"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Circuit ground potential"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Analog pressure signal output"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Circuit ground potential"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP229F3519-DS-v01_00-EN.pdf?fileId=5546d46264a8de7e0164f5fce9df6c8f",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973e1bfffd9e41956819"
  },
  "flag": "old",
  "manufacturer": "Murata",
  "name": "SCA720",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "Reserved",
      "description": "Not used"
    },
    {
      "number": "2",
      "name": "CLK",
      "description": "Data shift clock (factory only)"
    },
    {
      "number": "3",
      "name": "C1",
      "description": "(Factory only)"
    },
    {
      "number": "4",
      "name": "MODE",
      "description": "Mode control input (factory only)"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Negative supply voltage (VSS)"
    },
    {
      "number": "6",
      "name": "Reserved",
      "description": "Not used"
    },
    {
      "number": "7",
      "name": "Resered",
      "description": "Not used"
    },
    {
      "number": "8",
      "name": "PGM",
      "description": "Programming voltage (factory only)"
    },
    {
      "number": "9",
      "name": "ST",
      "description": "Self test control"
    },
    {
      "number": "10",
      "name": "VOUT",
      "description": "Sensor output voltage"
    },
    {
      "number": "11",
      "name": "VDD",
      "description": "Positive supply voltage (VDD)"
    },
    {
      "number": "12",
      "name": "EGND",
      "description": "EMC ground (lid grounding)"
    }
  ],
  "type": "sensor",
  "url": "https://www.mouser.de/pdfdocs/sca720d01_data_sheet.PDF",
  "version": "D01"
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e4195681a"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lis2ds12",
  "pages": "11",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Internally not connected. Can be tied to VDD, VDD_IO, GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT_2",
      "description": "Interrupt pin 2"
    },
    {
      "number": "12",
      "name": "INT_1",
      "description": "Interrupt pin 1"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lis2ds12.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e4195681b"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1561UA",
  "pages": "14",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply and output"
    },
    {
      "number": "3",
      "name": "AUX",
      "description": "Functional test pin, connection to ground is recommended"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_156y_hall-effect_switch_with_current_interface_2-wire_in_to92_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e4195681c"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1510UA",
  "pages": "15",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Output"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_to92_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e4195681d"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4963-1M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4963-1M-DataSheet-v01_02-EN.pdf?fileId=5546d462525dbac4015287edc65d27c4",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e4195681e"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_iis2iclx",
  "pages": "8",
  "pins": [
    {
      "number": "1",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins (recommend 100 nF filter capacitor)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled and reset)"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "4",
      "name": "INT_2",
      "description": "Mode 1: Programmable interrupt 2 (INT2) / Data enable (DEN), Mode 2: Programmable interrupt 2 (INT2) / Data enable (DEN) / I2C master external synchronization signal (MDRDY)"
    },
    {
      "number": "5",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "6",
      "name": "INT_1",
      "description": "Programmable Interrupt 1 (INT1)"
    },
    {
      "number": "7",
      "name": "SDx",
      "description": "Mode 1: Connect to GND or VDD_IO, Mode 2: I2C serial data master (MSDA)"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply (recommend 100 nF filter capacitor)"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply (recommend 100 nF filter capacitor)"
    },
    {
      "number": "10",
      "name": "SCL",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "11",
      "name": "SDA/SDI",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "12",
      "name": "SCx",
      "description": "Mode 1: Connect to GND or VDD_IO, Mode 2: I2C serial clock master (MSCL)"
    },
    {
      "number": "13",
      "name": "GND",
      "description": "GND"
    },
    {
      "number": "14",
      "name": "NC",
      "description": "Connect to GND or leave unconnected"
    },
    {
      "number": "15",
      "name": "NC",
      "description": "Connect to GND or leave unconnected"
    },
    {
      "number": "16",
      "name": "NC",
      "description": "Connect to GND or leave unconnected"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/iis2iclx.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e4195681f"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_ICS-40720",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "2",
      "name": "OUTPUT-",
      "description": "Analog Output Signal-"
    },
    {
      "number": "3",
      "name": "OUTPUT+",
      "description": "Analog Output Signal+"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sw_piezo/mic/mems-mic/data_sheet/ds-000045-ics-40720-v1.4.pdf",
  "version": "1.4"
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e41956820"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE493D-W2B6",
  "pages": "5",
  "pins": [
    {
      "number": "1",
      "name": "SCL /INT",
      "description": "Interface serial clock pin (input)\nInterrupt pin, signals a finished measurement cycle, open-drain"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground Pin"
    },
    {
      "number": "4",
      "name": "VDD",
      "description": "Supply Pin"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "6",
      "name": "SDA",
      "description": "Interface serial data pin (input/output), open-drain"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE493D-W2B6-DataSheet-v01_20-EN.pdf?fileId=5546d46261764359016189ec158943a4",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e41956821"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_CUR4000",
  "pages": "33",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply Voltage"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "TEST",
      "description": "Test, connect to GND"
    },
    {
      "number": "4",
      "name": "CSN",
      "description": "SPI Chip-Select"
    },
    {
      "number": "5",
      "name": "MISO",
      "description": "SPI OUT"
    },
    {
      "number": "6",
      "name": "WAKI/O",
      "description": "Wake Up"
    },
    {
      "number": "7",
      "name": "MOSI",
      "description": "SPI In"
    },
    {
      "number": "8",
      "name": "SCK",
      "description": "SPI Clock"
    }
  ],
  "type": "sensor",
  "url": "https://www.micronas.tdk.com/sites/default/files/downloads/files/CUR4000_Multi-Hall-Array-Current-Sensor_1DSH.pdf",
  "version": "2"
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e41956822"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_IAM-20680HP",
  "pages": "17",
  "pins": [
    {
      "number": "1",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage"
    },
    {
      "number": "2",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL); SPI serial clock (SPC)"
    },
    {
      "number": "3",
      "name": "SDA/SDI",
      "description": "I2C serial data (SDA); SPI serial data input (SDI)"
    },
    {
      "number": "4",
      "name": "SA0/SDO",
      "description": "I2C slave address LSB (SA0); SPI serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "CS",
      "description": "Chip select (0 = SPI mode; 1 = I2C mode)"
    },
    {
      "number": "6",
      "name": "INT",
      "description": "Interrupt digital output (totem pole or open-drain)"
    },
    {
      "number": "7",
      "name": "RESV",
      "description": "Reserved. Do not connect."
    },
    {
      "number": "8",
      "name": "FSYNC",
      "description": "Synchronization digital input (optional). Connect to GND if unused."
    },
    {
      "number": "9",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "10",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "11",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "12",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "13",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "14",
      "name": "REGOUT",
      "description": "Regulator filter capacitor connection"
    },
    {
      "number": "15",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "16",
      "name": "VDD",
      "description": "Power Supply"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/imu/data_sheet/ds-000409-iam-20680hp.pdf",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e41956823"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "SP40T",
  "pages": "18-20",
  "pins": [
    {
      "number": "1",
      "name": "SCL/PP0",
      "description": "General Purpose-I/O I2C Clock"
    },
    {
      "number": "2",
      "name": "SDA/PP1",
      "description": "General Purpose-I/O I2C Data"
    },
    {
      "number": "3",
      "name": "PP2",
      "description": "General Purpose-I/O UART RX data"
    },
    {
      "number": "4",
      "name": "GNDD",
      "description": "Digital Ground"
    },
    {
      "number": "5",
      "name": "PP3",
      "description": "General Purpose-I/O UART TX data"
    },
    {
      "number": "6",
      "name": "XIN",
      "description": "Crystal oscillator input"
    },
    {
      "number": "7",
      "name": "XOUT",
      "description": "Crystal oscillator output"
    },
    {
      "number": "8",
      "name": "LFN",
      "description": "LF receiver negative input"
    },
    {
      "number": "9",
      "name": "LFP",
      "description": "LF receiver positive input"
    },
    {
      "number": "10",
      "name": "VDDREG",
      "description": "Regulated voltage output (1.5V)2)"
    },
    {
      "number": "11",
      "name": "GNDA",
      "description": "Analog Ground"
    },
    {
      "number": "12",
      "name": "PAOUT",
      "description": "RF power amplifier output"
    },
    {
      "number": "13",
      "name": "VDDPA",
      "description": "Regulated voltage for PA"
    },
    {
      "number": "14",
      "name": "VDDBAT",
      "description": "Power supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-SP400-15-11-DataSheet-v01_01-EN.pdf?fileId=5546d4627255dbad01725cf7d6bc6f73",
  "version": "1.1"
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e41956824"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP212K1409",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "TEST",
      "description": "Test pin"
    },
    {
      "number": "2",
      "name": "CLOCK / VPROG",
      "description": "External clock for communication / programming\nvoltage"
    },
    {
      "number": "3",
      "name": "DATA IN",
      "description": "Serial data input pin"
    },
    {
      "number": "4",
      "name": "DATA OUT",
      "description": "Serial data output pin"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Circuit ground potential"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Analog pressure signal output"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Circuit ground potential"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP212K1409-DataSheet-v01_00-EN.pdf?fileId=5546d4627506bb3201754116ad5a5370",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e41956825"
  },
  "flag": "old",
  "manufacturer": "Texas Instruments",
  "name": "ti_TDC7200",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "ENABLE",
      "description": "Enable signal to TDC"
    },
    {
      "number": "2",
      "name": "TRIGG",
      "description": "Trigger output signal"
    },
    {
      "number": "3",
      "name": "START",
      "description": "START signal to TDC"
    },
    {
      "number": "4",
      "name": "STOP",
      "description": "STOP signal to TDC"
    },
    {
      "number": "5",
      "name": "CLOCK",
      "description": "Clock Input to TDC"
    },
    {
      "number": "6",
      "name": "N.C.",
      "description": "Not Connected"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "8",
      "name": "INTB",
      "description": "Interrupt to MCU, active low (open drain)"
    },
    {
      "number": "9",
      "name": "DOUT",
      "description": "SPI Data Output"
    },
    {
      "number": "10",
      "name": "DIN",
      "description": "SPI Data Input"
    },
    {
      "number": "11",
      "name": "CSB",
      "description": "SPI Chip Select, active low"
    },
    {
      "number": "12",
      "name": "SCLK",
      "description": "SPI clock"
    },
    {
      "number": "13",
      "name": "VREG",
      "description": "LDO Output terminal for external decoupling cap"
    },
    {
      "number": "14",
      "name": "VDD",
      "description": "Supply input"
    }
  ],
  "type": "sensor",
  "url": "https://www.ti.com/lit/ds/symlink/tdc7200.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e41956826"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE5009",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "COS_P",
      "description": "Analog positive cosine output"
    },
    {
      "number": "2",
      "name": "COS_N",
      "description": "Analog negative cosine output"
    },
    {
      "number": "3",
      "name": "GND2",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "GND1",
      "description": "Ground"
    },
    {
      "number": "5",
      "name": "VGMR",
      "description": "GMR bridge voltage proportional to temperature. Diagnostic function."
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "7",
      "name": "SIN_N",
      "description": "Analog negative sine output"
    },
    {
      "number": "8",
      "name": "SIN_P",
      "description": "Analog positive sine output"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE5009_EXXXX-DataSheet-v01_01-EN.pdf?fileId=5546d46276fb756a01771b1fec2f3a7f",
  "version": "1.1"
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e41956828"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLV4968-1TB",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "Q",
      "description": "Output"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLV4968_1TAB-DataSheet-v01_20-EN.pdf?fileId=5546d4624e765da5014ede5efa240c43",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e41956829"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_iis2mdc",
  "pages": "8",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Internally not connected. Can be tied to Vdd, Vdd_IO or GND."
    },
    {
      "number": "3",
      "name": "CS",
      "description": "I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled;, 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "C1",
      "description": "Capacitor connection (C1 = 220 nF)"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Connected to GND"
    },
    {
      "number": "7",
      "name": "INT/DRDY",
      "description": "Interrupt/data-ready signal"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": " Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "Internally not connected. Can be tied to Vdd, Vdd_IO or GND."
    },
    {
      "number": "12",
      "name": "NC",
      "description": "Internally not connected. Can be tied to Vdd, Vdd_IO or GND."
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/iis2mdc.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e4195682a"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4961-4M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4961-4M-DataSheet-v01_02-EN.pdf?fileId=db3a304340155f3d0140394b4fd67ddc",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e4195682b"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bmi085",
  "pages": "41",
  "pins": [
    {
      "number": "1",
      "name": "INT2",
      "description": "Interrupt pin 2 (accel int #2)"
    },
    {
      "number": "2",
      "name": "NC",
      "description": ""
    },
    {
      "number": "3",
      "name": "VDD",
      "description": "Power supply analog & digital domain (2.4 - 3.6V)"
    },
    {
      "number": "4",
      "name": "GNDA",
      "description": "Ground for analog domain"
    },
    {
      "number": "5",
      "name": "CSB2",
      "description": "SPI Chip select Gyro. SPI: CSB2. I2C; DNC (float)"
    },
    {
      "number": "6",
      "name": "GNDIO",
      "description": "Ground for I/O"
    },
    {
      "number": "7",
      "name": "PS",
      "description": "Protocol select gyroscope SPI: GND. I2C: VDDIO"
    },
    {
      "number": "8",
      "name": "SCL/SCK",
      "description": "SPI: serial clock SCK. I2C: serial clock SCL"
    },
    {
      "number": "9",
      "name": "SDA/SDI",
      "description": "SPI 4-Wire: SDI serial data I. SPI 3-Wire: SDA serial data I/O. I2C: serial data I/O"
    },
    {
      "number": "10",
      "name": "SDO2",
      "description": "SPI Serial data out Gyro. Address select in I2C mode"
    },
    {
      "number": "11",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage (1.2V ...3.6V)"
    },
    {
      "number": "12",
      "name": "INT3",
      "description": "Interrupt pin 3 (gyro int #1)"
    },
    {
      "number": "13",
      "name": "INT4",
      "description": "Interrupt pin 4 (gyro int #2)"
    },
    {
      "number": "14",
      "name": "CSB1",
      "description": "SPI Chip select Accel. SPI: CSB1. I2C: VDDIO or DNC (float)"
    },
    {
      "number": "15",
      "name": "SDO1",
      "description": "SPI Serial data out Accel. Address select in I2C mode"
    },
    {
      "number": "16",
      "name": "INT1",
      "description": "Interrupt pin 1 (accel int #1)"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi085-ds001.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e4195682c"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bhi360",
  "pages": "18",
  "pins": [
    {
      "number": "1",
      "name": "HSDO",
      "description": "Host Interface SPI MISO / I2C address select"
    },
    {
      "number": "2",
      "name": "ASDX",
      "description": "Sensor Aux Interface, OIS mode: MOS, I2C mode: SDA, Master 2: SPI MOSI / I2C SDA"
    },
    {
      "number": "3",
      "name": "ASCX",
      "description": "Sensor Aux Interface, OIS mode: Clock, I2C mode: SCL, Master 2: SPI SCK / I2C SCL"
    },
    {
      "number": "4",
      "name": "HIRQ",
      "description": "Host Interrupt Signal (Output)"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Digital IO and Fuser2 Supply"
    },
    {
      "number": "6",
      "name": "GNDIO",
      "description": "Digital IO and Fuser2 Ground"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Analog Sensor Ground"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Analog Sensor Supply"
    },
    {
      "number": "9",
      "name": "VREG",
      "description": "Voltage regulator output"
    },
    {
      "number": "10",
      "name": "OCSB",
      "description": "Sensor Aux Interface, OIS mode: Chip Select, I2C mode: unused, Master 2: SPI Chip Select 1"
    },
    {
      "number": "11",
      "name": "OSDO",
      "description": "Sensor Aux Interface, OIS mode: MISO, I2C mode: unused, Master 2: SPI MISO / I2C unused"
    },
    {
      "number": "12",
      "name": "HCSB",
      "description": "Host Interface, SPI mode: Chip Select, I2C: Switch to SPI mode* (to work in I2C mode, this line should be maintained as High)"
    },
    {
      "number": "13",
      "name": "HSCX",
      "description": "Host Interface: SPI SCK / I2C SCL"
    },
    {
      "number": "14",
      "name": "HSDX",
      "description": "Host Interface Serial Data, SPI MOSI / I2C SDA"
    },
    {
      "number": "15",
      "name": "M3SCL",
      "description": "Master 3 I2C SCL (I2C Serial Clock), Fuser2 Debug Clock (JTAG_CLK)"
    },
    {
      "number": "16",
      "name": "JTAG_DIO",
      "description": "Fuser Debug Data"
    },
    {
      "number": "17",
      "name": "RESETN",
      "description": "Reset input, active low"
    },
    {
      "number": "18",
      "name": "M3SDA",
      "description": "Master 3: I2C SDA"
    },
    {
      "number": "19",
      "name": "RESV2",
      "description": "Reserved: do not connect"
    },
    {
      "number": "20",
      "name": "RESV1",
      "description": "Reserved: do not connect"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bhi360-ds000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e4195682d"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP215F1701",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "TEST",
      "description": "Test pin"
    },
    {
      "number": "2",
      "name": "CLOCK / VPROG",
      "description": "External clock for communication / programming voltage"
    },
    {
      "number": "3",
      "name": "DATA IN",
      "description": "Serial data input pin"
    },
    {
      "number": "4",
      "name": "DATA OUT",
      "description": "Serial data output pin"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Circuit ground potential"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Analog pressure signal output"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Circuit ground potential"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP215F1701-DS-v01_00-en.pdf?fileId=db3a30432ad629a6012af6a900a30b34",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e4195682e"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lsm6dsop",
  "pages": "17",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-wire interface serial data output (SDO), I2C least significant bit of the device address (SA0)"
    },
    {
      "number": "2",
      "name": "RES",
      "description": "Connect to Vdd_IO or GND"
    },
    {
      "number": "3",
      "name": "RES",
      "description": "Connect to Vdd_IO or GND"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "10",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lsm6dsop.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e4195682f"
  },
  "flag": "old",
  "manufacturer": "Murata",
  "name": "SCA103T",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "SCK",
      "description": "Serial clock"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "No connect, left floating"
    },
    {
      "number": "3",
      "name": "MISO",
      "description": "Master in slave out; data output"
    },
    {
      "number": "4",
      "name": "MOSI",
      "description": "Master out slave in; data input"
    },
    {
      "number": "5",
      "name": "Out_2",
      "description": "Output 2 (Ch 2)"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "7",
      "name": "CSB",
      "description": "Chip select (active low)"
    },
    {
      "number": "8",
      "name": "NC",
      "description": "No connect, left floating"
    },
    {
      "number": "9",
      "name": "ST_2",
      "description": "Self test input for Ch 2"
    },
    {
      "number": "10",
      "name": "ST_1",
      "description": "Self test input for Ch 1"
    },
    {
      "number": "11",
      "name": "Out_1",
      "description": "Output 1(Ch 1)"
    },
    {
      "number": "12",
      "name": "VDD",
      "description": "Positive supply voltage (+5V DC)"
    }
  ],
  "type": "sensor",
  "url": "https://www.murata.com/~/media/webrenewal/products/sensor/inclinometer/sca103t/sca103t_inclinometer_datasheet__8261700a3_0.ashx?la=en-us",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e41956830"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4961-1K",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4961-1K-DataSheet-v01_02-EN.pdf?fileId=db3a304338e5bb6e0138e7bb30f30257",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e41956831"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_iis3dwb",
  "pages": "3",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-wire interface serial data output (SDO), I2C(1) least significant bit of the device address (SA0)"
    },
    {
      "number": "2",
      "name": "RES",
      "description": "Connect to VDD_IO or GND"
    },
    {
      "number": "3",
      "name": "RES",
      "description": "Connect to VDD_IO or GND"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt #1"
    },
    {
      "number": "5",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Programmable interrupt #2"
    },
    {
      "number": "10",
      "name": "RES",
      "description": "Connect to VDD_IO or leave unconnected"
    },
    {
      "number": "11",
      "name": "RES",
      "description": "Connect to VDD_IO or leave unconnected"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/SPI(1) mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "13",
      "name": "SPC/SCL",
      "description": "SPI serial port clock (SPC), I2C serial clock (SCL)"
    },
    {
      "number": "14",
      "name": "SDI/SDP/SDA",
      "description": "SPI serial data input (SDI), 3-wire interface serial data output (SDO), I2C serial data (SDA)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/iis3dwb.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e41956833"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_asm330lhhx",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-Wire interface serial data output (SDO), I2C less significant bit of the device address (SA0), MIPI I3C least significant bit of the static address (SA0)"
    },
    {
      "number": "2",
      "name": "MSDA",
      "description": "Mode 1: Connect to Vdd_IO or GND, Mode 2: I2C master serial data (MSDA)"
    },
    {
      "number": "3",
      "name": "MSCL",
      "description": "Mode 1: Connect to Vdd_IO or GND, Mode 2: I2C master serial clock (MSCL)"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt in I2C and SPI"
    },
    {
      "number": "5",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "NC",
      "description": "Connect to VDD_IO or GND or leave unconnected"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Mode 1: Programmable interrupt 2 (INT2) / Data enabled (DEN), Mode 2: Programmable interrupt 2 (INT2) / Data enabled (DEN) / I2C master external synchronization signal (MDRDY)"
    },
    {
      "number": "10",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/MIPI I3C/SPI mode selection (1: SPI idle mode / I2C/MIPI I3C communication enabled; 0: SPI communication mode / I²C/MIPI I3C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C/MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C/MIPI I3C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/asm330lhhx.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e41956835"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE 4913",
  "pages": "2",
  "pins": [
    {
      "number": "1",
      "name": "VS",
      "description": "Supply Voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Open Drain Input"
    },
    {
      "number": "3",
      "name": "Gnd",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4913-DS-v02_03-EN.pdf?fileId=5546d46269e1c019016ac0287fa13265",
  "version": "2.3"
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e41956836"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1563UA",
  "pages": "14",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply and output"
    },
    {
      "number": "3",
      "name": "AUX",
      "description": "Functional test pin, connection to ground is recommended"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_156y_hall-effect_switch_with_current_interface_2-wire_in_to92_package.pdf",
  "version": "3"
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e41956837"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_asm330lhhxg1",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-Wire interface serial data output (SDO), I2C less significant bit of the device address (SA0), MIPI I3C least significant bit of the static address (SA0)"
    },
    {
      "number": "2",
      "name": "MSDA",
      "description": "Mode 1: Connect to Vdd_IO or GND, Mode 2: I2C master serial data (MSDA)"
    },
    {
      "number": "3",
      "name": "MSCL",
      "description": "Mode 1: Connect to Vdd_IO or GND, Mode 2: I2C master serial clock (MSCL)"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt in I2C and SPI"
    },
    {
      "number": "5",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "NC",
      "description": "Connect to VDD_IO or GND or leave unconnected"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Mode 1: Programmable interrupt 2 (INT2) / Data enabled (DEN), Mode 2: Programmable interrupt 2 (INT2) / Data enabled (DEN) / I2C master external synchronization signal (MDRDY)"
    },
    {
      "number": "10",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/MIPI I3C/SPI mode selection (1: SPI idle mode / I2C/MIPI I3C communication enabled; 0: SPI communication mode / I²C/MIPI I3C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C/MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C/MIPI I3C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/asm330lhhxg1.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e41956838"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLV493D-A1B6",
  "pages": "8",
  "pins": [
    {
      "number": "1",
      "name": "SCL /INT",
      "description": "Interface serial clock pin (input)\nInterrupt pin, signals a finished measurement cycle"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "connect to GND"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground Pin"
    },
    {
      "number": "4",
      "name": "VDD",
      "description": "Supply Pin"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "connect to GND"
    },
    {
      "number": "6",
      "name": "SDA ADDR",
      "description": "Interface serial data pin (input/output), open drain Sensor ID configuration during power up"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLV493D-A1B6-DataSheet-v01_10-EN.pdf?fileId=5546d462525dbac40152a6b85c760e80",
  "version": "1.1"
},
{
  "_id": {
    "$oid": "680f973f1bfffd9e41956839"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lsm6dso32x",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-wire interface serial data output (SDO), I2C least significant bit of the device address (SA0), MIPI I3C least significant bit of the static address (SA0)"
    },
    {
      "number": "2",
      "name": "SDx",
      "description": "Mode 1: Connect to Vdd_IO or GND, Mode 2: I2C serial data master (MSDA)"
    },
    {
      "number": "3",
      "name": "SCx",
      "description": "Mode 1: Connect to Vdd_IO or GND, Mode 2: I2C serial clock master (MSCL)"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt 1 / If device is used as MIPI I3C pure slave, this pin must be set to ‘1’"
    },
    {
      "number": "5",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Mode 1: Programmable interrupt 2, Mode 2: Programmable interrupt 2 (INT2) / Data enable(DEN) / I2C master external synchronization signal (MDRDY)"
    },
    {
      "number": "10",
      "name": "NC",
      "description": "Connect to Vdd_IO or leave unconnected"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "Connect to Vdd_IO or leave unconnected"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/MIPI I3C/SPI mode selection (1: SPI idle mode / I2C/MIPI I3C communication enabled; 0: SPI communication mode / I2C/MIPI I3C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C/MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C/MIPI I3C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lsm6dso32x.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97401bfffd9e4195683a"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_ICS-43434",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "WS",
      "description": "Serial Data-Word Select for I²S Interface."
    },
    {
      "number": "2",
      "name": "LR",
      "description": "Left/Right channel select. When set low, the microphone outputs its signal in the left channel of the I2S frame. When set to high, the microphone outputs its signal in the right channel."
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground. Connect to ground on the PCB."
    },
    {
      "number": "4",
      "name": "S",
      "description": "Ground. Connect to ground on the PCB."
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Power, 1.65 to 3.63 V. This pin should be decoupled to GND with a 0.1 μF capacitor."
    },
    {
      "number": "4",
      "name": "SCK",
      "description": "Serial Data Clock for I²S Interface"
    },
    {
      "number": "6",
      "name": "SD",
      "description": "Serial Data Output for I²S Interface. This pin tri‐states when not actively driving the appropriate output channel. The SD trace should have a 100 kΩ pulldown resistor to discharge the line during the time that all microphones on the bus have tri‐stated their outputs."
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sw_piezo/mic/mems-mic/data_sheet/ds-000069-ics-43434-v1.2.pdf",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97401bfffd9e4195683b"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_sths34pf80",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C / SPI serial interface clock"
    },
    {
      "number": "2",
      "name": "RES",
      "description": "Reserved (connect to GND)"
    },
    {
      "number": "3",
      "name": "CS",
      "description": "I2C / SPI interface selection (1: I2C enabled; 0: SPI enabled)"
    },
    {
      "number": "4",
      "name": "SDA/SDI/O",
      "description": "I2C / SPI serial data line"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Leave floating (do not connect)"
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "INT",
      "description": "Interrupt signal"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/sths34pf80.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97401bfffd9e4195683c"
  },
  "flag": "old",
  "manufacturer": "Murata",
  "name": "SCA1000",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "SCK",
      "description": "Serial clock"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "No connect, left floating"
    },
    {
      "number": "3",
      "name": "MISO",
      "description": "Master in slave out; data output"
    },
    {
      "number": "4",
      "name": "MOSI",
      "description": "Master out slave in; data input"
    },
    {
      "number": "5",
      "name": "Out_2",
      "description": "Y axis Output (Ch 2)"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "7",
      "name": "CSB",
      "description": "Chip select (active low)"
    },
    {
      "number": "8",
      "name": "NC",
      "description": "No connect, left floating"
    },
    {
      "number": "9",
      "name": "ST_2",
      "description": "Self test input for Ch 2"
    },
    {
      "number": "10",
      "name": "ST_1",
      "description": "Self test input for Ch 1"
    },
    {
      "number": "11",
      "name": "Out_1",
      "description": "X axis Output (Ch 1)"
    },
    {
      "number": "12",
      "name": "VDD",
      "description": "Positive supply voltage (+5V DC)"
    }
  ],
  "type": "sensor",
  "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2312191732_Murata-Electronics-SCA1000-N1000070-PCB_C19326812.pdf",
  "version": "N1000070"
},
{
  "_id": {
    "$oid": "680f97401bfffd9e4195683d"
  },
  "flag": "old",
  "manufacturer": "Texas Instruments",
  "name": "ti_LMK05318",
  "pages": "4-6",
  "pins": [
    {
      "number": "PAD",
      "name": "GND",
      "description": "Ground / Thermal Pad. The exposed pad must be connected to PCB ground for proper electrical and thermal performance. A 5×5 via pattern is recommended to connect the IC ground pad to the PCB ground layers."
    },
    {
      "number": "5",
      "name": "VDD_IN",
      "description": "Core Supply (3.3 V) for Primary and Secondary Reference Inputs. Place a nearby 0.1-µF bypass capacitor on each pin."
    },
    {
      "number": "33",
      "name": "VDD_XO",
      "description": "Core Supply (3.3 V) for XO Input. Place a nearby 0.1-µF bypass capacitor on each pin."
    },
    {
      "number": "27",
      "name": "VDD_PLL1",
      "description": "Core Supply (3.3 V) for PLL1, PLL2, and Digital Blocks. Place a nearby 0.1-µF bypass capacitor on each pin."
    },
    {
      "number": "36",
      "name": "VDD_PLL2",
      "description": "Core Supply (3.3 V) for PLL1, PLL2, and Digital Blocks. Place a nearby 0.1-µF bypass capacitor on each pin."
    },
    {
      "number": "4",
      "name": "VDD_DIG",
      "description": "Core Supply (3.3 V) for PLL1, PLL2, and Digital Blocks. Place a nearby 0.1-µF bypass capacitor on each pin."
    },
    {
      "number": "18",
      "name": "VDDO_01",
      "description": "Output Supply (1.8, 2.5, or 3.3 V) for Clock Outputs 0 to 7. Place a nearby 0.1-µF bypass capacitor on each pin."
    },
    {
      "number": "19",
      "name": "VDDO_23",
      "description": "Output Supply (1.8, 2.5, or 3.3 V) for Clock Outputs 0 to 7. Place a nearby 0.1-µF bypass capacitor on each pin."
    },
    {
      "number": "37",
      "name": "VDDO_4",
      "description": "Output Supply (1.8, 2.5, or 3.3 V) for Clock Outputs 0 to 7. Place a nearby 0.1-µF bypass capacitor on each pin."
    },
    {
      "number": "40",
      "name": "VDDO_5",
      "description": "Output Supply (1.8, 2.5, or 3.3 V) for Clock Outputs 0 to 7. Place a nearby 0.1-µF bypass capacitor on each pin."
    },
    {
      "number": "43",
      "name": "VDDO_6",
      "description": "Output Supply (1.8, 2.5, or 3.3 V) for Clock Outputs 0 to 7. Place a nearby 0.1-µF bypass capacitor on each pin."
    },
    {
      "number": "46",
      "name": "VDDO_7",
      "description": "Output Supply (1.8, 2.5, or 3.3 V) for Clock Outputs 0 to 7. Place a nearby 0.1-µF bypass capacitor on each pin."
    },
    {
      "number": "29",
      "name": "LF1",
      "description": "External Loop Filter Capacitor for APLL1 and APLL2. Place a nearby capacitor on each pin. For LF1, 0.47-µF is suggested for typical APLL1 loop bandwidths around 2.5 kHz. For LF2, 0.1-µF is suggested for typical APLL2 loop bandwidth around 500 kHz."
    },
    {
      "number": "34",
      "name": "LF2",
      "description": "External Loop Filter Capacitor for APLL1 and APLL2. Place a nearby capacitor on each pin. For LF1, 0.47-µF is suggested for typical APLL1 loop bandwidths around 2.5 kHz. For LF2, 0.1-µF is suggested for typical APLL2 loop bandwidth around 500 kHz."
    },
    {
      "number": "28",
      "name": "CAP_PLL1",
      "description": "External Bypass Capacitors for APLL1, APLL2, and Digital Blocks. Place a nearby 10-µF bypass capacitor on each pin."
    },
    {
      "number": "35",
      "name": "CAP_PLL2",
      "description": "External Bypass Capacitors for APLL1, APLL2, and Digital Blocks. Place a nearby 10-µF bypass capacitor on each pin."
    },
    {
      "number": "3",
      "name": "CAP_DIG",
      "description": "External Bypass Capacitors for APLL1, APLL2, and Digital Blocks. Place a nearby 10-µF bypass capacitor on each pin."
    },
    {
      "number": "6",
      "name": "PRIREF_P",
      "description": "DPLL Primary and Secondary Reference Clock Inputs. Each input pair can accept a differential or single-ended clock as a reference to the DPLL. Each pair has a programmable input type with internal termination to support AC- or DC-coupled clocks. A single-ended LVCMOS clock can be applied to the P input with the N input pulled down to ground. An unused input pair can be left floating."
    },
    {
      "number": "7",
      "name": "PRIREF_N",
      "description": "DPLL Primary and Secondary Reference Clock Inputs. Each input pair can accept a differential or single-ended clock as a reference to the DPLL. Each pair has a programmable input type with internal termination to support AC- or DC-coupled clocks. A single-ended LVCMOS clock can be applied to the P input with the N input pulled down to ground. An unused input pair can be left floating."
    },
    {
      "number": "10",
      "name": "SECREF_P",
      "description": "DPLL Primary and Secondary Reference Clock Inputs. Each input pair can accept a differential or single-ended clock as a reference to the DPLL. Each pair has a programmable input type with internal termination to support AC- or DC-coupled clocks. A single-ended LVCMOS clock can be applied to the P input with the N input pulled down to ground. An unused input pair can be left floating."
    },
    {
      "number": "11",
      "name": "SECREF_N",
      "description": "DPLL Primary and Secondary Reference Clock Inputs. Each input pair can accept a differential or single-ended clock as a reference to the DPLL. Each pair has a programmable input type with internal termination to support AC- or DC-coupled clocks. A single-ended LVCMOS clock can be applied to the P input with the N input pulled down to ground. An unused input pair can be left floating."
    },
    {
      "number": "31",
      "name": "XO_P",
      "description": "XO/TCXO/OCXO Input. This input pair can accept a differential or single-ended clock signal from a low-jitter local oscillator as a reference to the APLLs. This input has a programmable input type with internal termination to support AC- or DC-coupled clocks. A single-ended LVCMOS clock (up to 2.5 V) can be applied to the P input with the N input pulled down to ground. A low-frequency TCXO or OCXO can be used to set the clock output frequency accuracy and stability during free-run and holdover modes. In DPLL mode, the XO frequency must have a non-integer relationship to the VCO1 frequency so APLL1 can operate in fractional mode (required for proper DPLL operation). In APLL-only mode, the XO frequency can have either an integer or non-integer relationship to the VCO1 frequency."
    },
    {
      "number": "32",
      "name": "XO_N",
      "description": "XO/TCXO/OCXO Input. This input pair can accept a differential or single-ended clock signal from a low-jitter local oscillator as a reference to the APLLs. This input has a programmable input type with internal termination to support AC- or DC-coupled clocks. A single-ended LVCMOS clock (up to 2.5 V) can be applied to the P input with the N input pulled down to ground. A low-frequency TCXO or OCXO can be used to set the clock output frequency accuracy and stability during free-run and holdover modes. In DPLL mode, the XO frequency must have a non-integer relationship to the VCO1 frequency so APLL1 can operate in fractional mode (required for proper DPLL operation). In APLL-only mode, the XO frequency can have either an integer or non-integer relationship to the VCO1 frequency."
    },
    {
      "number": "14",
      "name": "OUT0_P",
      "description": "Clock Outputs 0 to 3 Bank. Each programmable output driver pair can support AC-LVDS, AC-CML, AC-LVPECL, and HCSL. Unused differential outputs should be terminated if active or left floating if disabled through registers. The OUT[0:3] bank is preferred for PLL1 clocks to minimize output crosstalk."
    },
    {
      "number": "15",
      "name": "OUT0_N",
      "description": "Clock Outputs 0 to 3 Bank. Each programmable output driver pair can support AC-LVDS, AC-CML, AC-LVPECL, and HCSL. Unused differential outputs should be terminated if active or left floating if disabled through registers. The OUT[0:3] bank is preferred for PLL1 clocks to minimize output crosstalk."
    },
    {
      "number": "17",
      "name": "OUT1_P",
      "description": "Clock Outputs 0 to 3 Bank. Each programmable output driver pair can support AC-LVDS, AC-CML, AC-LVPECL, and HCSL. Unused differential outputs should be terminated if active or left floating if disabled through registers. The OUT[0:3] bank is preferred for PLL1 clocks to minimize output crosstalk."
    },
    {
      "number": "16",
      "name": "OUT1_N",
      "description": "Clock Outputs 0 to 3 Bank. Each programmable output driver pair can support AC-LVDS, AC-CML, AC-LVPECL, and HCSL. Unused differential outputs should be terminated if active or left floating if disabled through registers. The OUT[0:3] bank is preferred for PLL1 clocks to minimize output crosstalk."
    },
    {
      "number": "20",
      "name": "OUT2_P",
      "description": "Clock Outputs 0 to 3 Bank. Each programmable output driver pair can support AC-LVDS, AC-CML, AC-LVPECL, and HCSL. Unused differential outputs should be terminated if active or left floating if disabled through registers. The OUT[0:3] bank is preferred for PLL1 clocks to minimize output crosstalk."
    },
    {
      "number": "21",
      "name": "OUT2_N",
      "description": "Clock Outputs 0 to 3 Bank. Each programmable output driver pair can support AC-LVDS, AC-CML, AC-LVPECL, and HCSL. Unused differential outputs should be terminated if active or left floating if disabled through registers. The OUT[0:3] bank is preferred for PLL1 clocks to minimize output crosstalk."
    },
    {
      "number": "23",
      "name": "OUT3_P",
      "description": "Clock Outputs 0 to 3 Bank. Each programmable output driver pair can support AC-LVDS, AC-CML, AC-LVPECL, and HCSL. Unused differential outputs should be terminated if active or left floating if disabled through registers. The OUT[0:3] bank is preferred for PLL1 clocks to minimize output crosstalk."
    },
    {
      "number": "22",
      "name": "OUT3_N",
      "description": "Clock Outputs 0 to 3 Bank. Each programmable output driver pair can support AC-LVDS, AC-CML, AC-LVPECL, and HCSL. Unused differential outputs should be terminated if active or left floating if disabled through registers. The OUT[0:3] bank is preferred for PLL1 clocks to minimize output crosstalk."
    },
    {
      "number": "39",
      "name": "OUT4_P",
      "description": "Clock Outputs 4 to 7 Bank. Each programmable output driver pair can support AC-LVDS, AC-CML, AC-LVPECL, HCSL, or 1.8-V LVCMOS clocks (one or two per pair). Unused differential outputs should be terminated if active or left floating if disabled through registers. The OUT[4:7] bank is preferred for PLL2 clocks to minimize output crosstalk. When PLL2 is not used, the OUT[4:7] bank can be used for PLL1 clocks without risk of cross-coupling from PLL2."
    },
    {
      "number": "38",
      "name": "OUT4_N",
      "description": "Clock Outputs 4 to 7 Bank. Each programmable output driver pair can support AC-LVDS, AC-CML, AC-LVPECL, HCSL, or 1.8-V LVCMOS clocks (one or two per pair). Unused differential outputs should be terminated if active or left floating if disabled through registers. The OUT[4:7] bank is preferred for PLL2 clocks to minimize output crosstalk. When PLL2 is not used, the OUT[4:7] bank can be used for PLL1 clocks without risk of cross-coupling from PLL2."
    },
    {
      "number": "42",
      "name": "OUT5_P",
      "description": "Clock Outputs 4 to 7 Bank. Each programmable output driver pair can support AC-LVDS, AC-CML, AC-LVPECL, HCSL, or 1.8-V LVCMOS clocks (one or two per pair). Unused differential outputs should be terminated if active or left floating if disabled through registers. The OUT[4:7] bank is preferred for PLL2 clocks to minimize output crosstalk. When PLL2 is not used, the OUT[4:7] bank can be used for PLL1 clocks without risk of cross-coupling from PLL2."
    },
    {
      "number": "41",
      "name": "OUT5_N",
      "description": "Clock Outputs 4 to 7 Bank. Each programmable output driver pair can support AC-LVDS, AC-CML, AC-LVPECL, HCSL, or 1.8-V LVCMOS clocks (one or two per pair). Unused differential outputs should be terminated if active or left floating if disabled through registers. The OUT[4:7] bank is preferred for PLL2 clocks to minimize output crosstalk. When PLL2 is not used, the OUT[4:7] bank can be used for PLL1 clocks without risk of cross-coupling from PLL2."
    },
    {
      "number": "45",
      "name": "OUT6_P",
      "description": "Clock Outputs 4 to 7 Bank. Each programmable output driver pair can support AC-LVDS, AC-CML, AC-LVPECL, HCSL, or 1.8-V LVCMOS clocks (one or two per pair). Unused differential outputs should be terminated if active or left floating if disabled through registers. The OUT[4:7] bank is preferred for PLL2 clocks to minimize output crosstalk. When PLL2 is not used, the OUT[4:7] bank can be used for PLL1 clocks without risk of cross-coupling from PLL2."
    },
    {
      "number": "44",
      "name": "OUT6_N",
      "description": "Clock Outputs 4 to 7 Bank. Each programmable output driver pair can support AC-LVDS, AC-CML, AC-LVPECL, HCSL, or 1.8-V LVCMOS clocks (one or two per pair). Unused differential outputs should be terminated if active or left floating if disabled through registers. The OUT[4:7] bank is preferred for PLL2 clocks to minimize output crosstalk. When PLL2 is not used, the OUT[4:7] bank can be used for PLL1 clocks without risk of cross-coupling from PLL2."
    },
    {
      "number": "48",
      "name": "OUT7_P",
      "description": "Clock Outputs 4 to 7 Bank. Each programmable output driver pair can support AC-LVDS, AC-CML, AC-LVPECL, HCSL, or 1.8-V LVCMOS clocks (one or two per pair). Unused differential outputs should be terminated if active or left floating if disabled through registers. The OUT[4:7] bank is preferred for PLL2 clocks to minimize output crosstalk. When PLL2 is not used, the OUT[4:7] bank can be used for PLL1 clocks without risk of cross-coupling from PLL2."
    },
    {
      "number": "47",
      "name": "OUT7_N",
      "description": "Clock Outputs 4 to 7 Bank. Each programmable output driver pair can support AC-LVDS, AC-CML, AC-LVPECL, HCSL, or 1.8-V LVCMOS clocks (one or two per pair). Unused differential outputs should be terminated if active or left floating if disabled through registers. The OUT[4:7] bank is preferred for PLL2 clocks to minimize output crosstalk. When PLL2 is not used, the OUT[4:7] bank can be used for PLL1 clocks without risk of cross-coupling from PLL2."
    },
    {
      "number": "9",
      "name": "HW_SW_CTRL",
      "description": "Device Start-Up Mode Select (3-level, 1.8-V compatible). This input selects the device start-up mode that determines the memory page used to initialize the registers, serial interface, and logic pin functions. The input level is sampled only at device power-on reset (POR)."
    },
    {
      "number": "13",
      "name": "PDN",
      "description": "Device Power-Down (active low). When PDN is pulled low, the device is in hard-reset and all blocks including the serial interface are powered down. When PDN is pulled high, the device is started according to device mode selected by HW_SW_CTRL and begins normal operation with all internal circuits reset to their initial state."
    },
    {
      "number": "25",
      "name": "SDA/SDI",
      "description": "I²C Serial Data I/O (SDA) or SPI Serial Data Input (SDI). When HW_SW_CTRL is 0 or 1, the serial interface is I²C. SDA and SCL pins (open drain) require external I²C pullup resistors. The default 7-bit I²C address is 1100xxb, where the MSB bits (1100) are initialized from on-chip EEPROM and the LSB bits (xxb) are determined by the logic input pins. When HW_SW_CTRL is 0, the LSBs are determined by the GPIO1 input state (3-level) during POR. When HW_SW_CTRL is 1, the LSBs are fixed to 00b. When HW_SW_CTRL is Float, the serial interface is SPI (4-wire, Mode 0) using the SDI, SCK, SCS, and SDO pins."
    },
    {
      "number": "26",
      "name": "SCL/SCK",
      "description": "I²C Serial Clock Input (SCL) or SPI Serial Clock Input (SCK)."
    },
    {
      "number": "12",
      "name": "GPIO0/SYNCN",
      "description": "Multifunction Inputs or Outputs."
    },
    {
      "number": "24",
      "name": "GPIO1/SCS",
      "description": "Multifunction Inputs or Outputs."
    },
    {
      "number": "30",
      "name": "GPIO2/SDO/FINC",
      "description": "Multifunction Inputs or Outputs."
    },
    {
      "number": "1",
      "name": "STATUS0",
      "description": "Status Outputs 0 and 1. Each output has programmable status signal selection, driver type (3.3-V LVCMOS or open-drain), and status polarity. Open-drain requires an external pullup resistor. Leave pin floating if unused. In I²C mode, the STATUS1/FDEC pin can function as a DCO mode control input pin."
    },
    {
      "number": "2",
      "name": "STATUS1/FDEC",
      "description": "Status Outputs 0 and 1. Each output has programmable status signal selection, driver type (3.3-V LVCMOS or open-drain), and status polarity. Open-drain requires an external pullup resistor. Leave pin floating if unused. In I²C mode, the STATUS1/FDEC pin can function as a DCO mode control input pin."
    },
    {
      "number": "8",
      "name": "REFSEL",
      "description": "Manual DPLL Reference Clock Input Selection (3-level, 1.8-V compatible). REFSEL = 0 (PRIREF), 1 (SECREF), or Float or VIM (Auto Select). This control pin must be enabled by register default or programming. Leave pin floating if unused."
    }
  ],
  "type": "sensor",
  "url": "https://www.ti.com/lit/ds/symlink/lmk05318.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97401bfffd9e4195683e"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lps33k",
  "pages": "2",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "2",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "3",
      "name": "SCL",
      "description": "I2C serial clock"
    },
    {
      "number": "4",
      "name": "SDA",
      "description": "I2C serial data"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lps33k.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97401bfffd9e4195683f"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_ICG-20609",
  "pages": "17",
  "pins": [
    {
      "number": "1",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage"
    },
    {
      "number": "2",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL); SPI serial clock (SPC)"
    },
    {
      "number": "3",
      "name": "SDA/SDI",
      "description": "I2C serial data (SDA); SPI serial data input (SDI)"
    },
    {
      "number": "4",
      "name": "SA0/SDO",
      "description": "I2C slave address LSB (SA0); SPI serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "CS",
      "description": "Chip select (0 = SPI mode; 1 = I2C mode)"
    },
    {
      "number": "6",
      "name": "INT",
      "description": "Interrupt digital output (totem pole or open-drain)"
    },
    {
      "number": "7",
      "name": "RESV",
      "description": "Reserved. Do not connect."
    },
    {
      "number": "8",
      "name": "FSYNC",
      "description": "Synchronization digital input (optional). Connect to GND if unused."
    },
    {
      "number": "9",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "10",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "11",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "12",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "13",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "14",
      "name": "REGOUT",
      "description": "Regulator filter capacitor connection"
    },
    {
      "number": "15",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "16",
      "name": "VDD",
      "description": "Power Supply"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/imu/data_sheet/icm-20609-v1.5-002.pdf",
  "version": "1.5"
},
{
  "_id": {
    "$oid": "680f97401bfffd9e41956840"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLI5590 - A6W",
  "pages": "4",
  "pins": [
    {
      "number": "A1",
      "name": "VP2",
      "description": "Positive out of bridge #2"
    },
    {
      "number": "A2",
      "name": "VN2",
      "description": "Negative out of bridge #2"
    },
    {
      "number": "B1",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "B2",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "C1",
      "name": "VP1",
      "description": "Positive out of bridge #1"
    },
    {
      "number": "C2",
      "name": "VN1",
      "description": "Negative out of bridge #1"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLI5590-A6W-DataSheet-v01_10-EN.pdf?fileId=8ac78c8c8c3de074018c68e0bc434a54",
  "version": "01.10"
},
{
  "_id": {
    "$oid": "680f97401bfffd9e41956841"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_ism330dhcx",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-wire interface serial data output (SDO), I2C least significant bit of the device address (SA0)"
    },
    {
      "number": "2",
      "name": "SDx",
      "description": "Mode 1: Connect to Vdd_IO or GND, Mode 2: I2C serial data master (MSDA), Mode 3/4: Auxiliary SPI 3/4-wire interface serial data input (SDI) and SPI 3-wire serial data output (SDO)"
    },
    {
      "number": "3",
      "name": "SCx",
      "description": "Mode 1: Connect to Vdd_IO or GND, Mode 2: I2C serial clock master (MSCL), Mode 3/4: Auxiliary SPI 3/4-wire interface serial port clock (SPC_Aux)"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt in I2C and SPI"
    },
    {
      "number": "5",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Mode 1: Programmable interrupt 2 (INT2) / Data enabled (DEN), Mode 2: Programmable interrupt 2 (INT2) / Data enabled (DEN) / I2C master external synchronization signal (MDRDY), Mode 3/4: Programmable interrupt 2 (INT2) / Data enabled (DEN)"
    },
    {
      "number": "10",
      "name": "OCS_AUX",
      "description": "Mode 1: Leave unconnected, Mode 2: Leave unconnected, Mode 3/4: Auxiliary SPI 3/4-wire interface enable"
    },
    {
      "number": "11",
      "name": "SDO_Aux",
      "description": "Mode 1: Connect to Vdd_IO or leave unconnected, Mode 2: Connect to Vdd_IO or leave unconnected, Mode 3/4: Auxiliary SPI 3-wire interface: leave unconnected, Auxiliary SPI 4-wire interface: serial data output (SDO_Aux)"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/ism330dhcx.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97401bfffd9e41956842"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4946-2L",
  "pages": "3",
  "pins": [
    {
      "number": "1",
      "name": "Vs",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "Q",
      "description": "Output"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4946-2L-DataSheet-v01_10-EN.pdf?fileId=db3a304338ec6d390138fc8f905876d3",
  "version": "1.1"
},
{
  "_id": {
    "$oid": "680f97401bfffd9e41956844"
  },
  "flag": "old",
  "manufacturer": "Murata",
  "name": "SCH16T",
  "pages": "14",
  "pins": [
    {
      "number": "1",
      "name": "HEATSINK",
      "description": "Heatsink connection"
    },
    {
      "number": "2",
      "name": "Reserved",
      "description": "Leave floating"
    },
    {
      "number": "3",
      "name": "TA9",
      "description": "SPI device selection Address 1 (static). Slave\naddressing in SafeSPI2. Max four slaves can be\naddresses by TA9:8. TA on the slave is defined by\nDVIO logic level at pins TA9 and TA8."
    },
    {
      "number": "4",
      "name": "TA8",
      "description": "SPI device selection Address 0 (static). Slave\naddressing in SafeSPI2. Max four slaves can be\naddresses by TA9:8. TA on the slave is defined by\nDVIO logic level at pins TA9 and TA8."
    },
    {
      "number": "5",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "6",
      "name": "EXTRESN",
      "description": "External reset input (low active) during normal\noperation."
    },
    {
      "number": "7",
      "name": "Reserved",
      "description": "Connect to GND"
    },
    {
      "number": "8",
      "name": "V3P3",
      "description": "External unregulated inputs for the core supply\nregulators"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "10",
      "name": "VREGA2",
      "description": "Regulated core voltage for the analog circuitry. External\ncapacitor connection for positive reference/supply\nvoltage. Connected in PCB."
    },
    {
      "number": "11",
      "name": "VREGA",
      "description": "Regulated core voltage for the analog circuitry. External\ncapacitor connection for positive reference/supply\nvoltage. Connected in PCB."
    },
    {
      "number": "12",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "13",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "14",
      "name": "VREGD2",
      "description": "Regulated core voltage for the digital circuitry. External\ncapacitor connection for positive reference/supply\nvoltage. Connected in PCB."
    },
    {
      "number": "15",
      "name": "VREGD",
      "description": "Regulated core voltage for the digital circuitry. External\ncapacitor connection for positive reference/supply\nvoltage. Connected in PCB."
    },
    {
      "number": "16",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "17",
      "name": "V3P3",
      "description": "External unregulated inputs for the core supply\nregulators"
    },
    {
      "number": "18",
      "name": "VDDIO",
      "description": "Digital supply IO"
    },
    {
      "number": "19",
      "name": "MISO",
      "description": "Master In Slave Out (SPI)"
    },
    {
      "number": "20",
      "name": "DRY_SYNC",
      "description": "Sync input (active high)\nDRY (Data Ready) outputs an interrupt signal for\nexternal MCU when the internal output registers\n(gyroscope + accelerometer) have been updated."
    },
    {
      "number": "21",
      "name": "SCK",
      "description": "Serial clock (SPI)"
    },
    {
      "number": "22",
      "name": "CS",
      "description": "Chip select (SPI)"
    },
    {
      "number": "23",
      "name": "MOSI",
      "description": "Master Out Slave In (SPI)"
    },
    {
      "number": "24",
      "name": "HEATSINK",
      "description": "Heatsink connection"
    }
  ],
  "type": "sensor",
  "url": "https://www.murata.com/-/media/webrenewal/products/sensor/pdf/datasheet/datasheet-sch16t-series-short.ashx?la=en-gb&cvid=20240628010000000000",
  "version": "K01"
},
{
  "_id": {
    "$oid": "680f97401bfffd9e41956845"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE5014SP16D",
  "pages": "3-4",
  "pins": [
    {
      "number": "1",
      "name": "IF1-1",
      "description": "DATA (MOSI/MISO)"
    },
    {
      "number": "2",
      "name": "IF2-1",
      "description": "SCK (SSC clock)"
    },
    {
      "number": "3",
      "name": "IF3-1",
      "description": "CSQ (chip select)"
    },
    {
      "number": "4",
      "name": "VDD-1",
      "description": "Supply voltage, positive"
    },
    {
      "number": "5",
      "name": "GND-1",
      "description": "Supply voltage, ground"
    },
    {
      "number": "6",
      "name": "IFA-1",
      "description": "Connect to GND"
    },
    {
      "number": "7",
      "name": "IFB-1",
      "description": "Connect via pull-up to VDD"
    },
    {
      "number": "8",
      "name": "IFC-1",
      "description": "Keep open"
    },
    {
      "number": "9",
      "name": "IFC-2",
      "description": "Keep open"
    },
    {
      "number": "10",
      "name": "IFB-2",
      "description": "Connect via pull-up to VDD"
    },
    {
      "number": "11",
      "name": "IFA-2",
      "description": "Connect to GND"
    },
    {
      "number": "12",
      "name": "GND-2",
      "description": "Supply voltage, ground"
    },
    {
      "number": "13",
      "name": "VDD-2",
      "description": "Supply voltage, positive"
    },
    {
      "number": "14",
      "name": "IF3-2",
      "description": "CSQ (chip select)"
    },
    {
      "number": "15",
      "name": "IF2-2",
      "description": "SCK (SSC clock)"
    },
    {
      "number": "16",
      "name": "IF1-2",
      "description": "DATA (MOSI/MISO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE5014SP16D%20E0002-DataSheet-v01_00-EN.pdf?fileId=5546d46270c4f93e0170c92e1bc10212",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f97401bfffd9e41956846"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_ICG-20330",
  "pages": "16",
  "pins": [
    {
      "number": "1",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage"
    },
    {
      "number": "2",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL); SPI serial clock (SPC)"
    },
    {
      "number": "3",
      "name": "SDA/SDI",
      "description": "I2C serial data (SDA); SPI serial data input (SDI)"
    },
    {
      "number": "4",
      "name": "SA0/SDO",
      "description": "I2C slave address LSB (SA0); SPI serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "CS",
      "description": "Chip select (0 = SPI mode; 1 = I2C mode)"
    },
    {
      "number": "6",
      "name": "INT",
      "description": "Interrupt digital output (totem pole or open-drain)"
    },
    {
      "number": "7",
      "name": "RESV",
      "description": "Reserved. Do not connect."
    },
    {
      "number": "8",
      "name": "FSYNC",
      "description": "Synchronization digital input (optional). Connect to GND if unused."
    },
    {
      "number": "9",
      "name": "NC",
      "description": "Connect to GND or do not connect"
    },
    {
      "number": "10",
      "name": "NC",
      "description": "Connect to GND or do not connect"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "Connect to GND or do not connect"
    },
    {
      "number": "12",
      "name": "NC",
      "description": "Connect to GND or do not connect"
    },
    {
      "number": "13",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "14",
      "name": "REGOUT",
      "description": "Regulator filter capacitor connection"
    },
    {
      "number": "15",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "16",
      "name": "VDD",
      "description": "Power Supply"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/gyro/data_sheet/ds-000127-icg-20330-typ-v1.1.pdf",
  "version": "1.1"
},
{
  "_id": {
    "$oid": "680f97401bfffd9e41956847"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lps27hhtw",
  "pages": "3",
  "pins": [
    {
      "number": "1",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "SCL/SPC",
      "description": "I2C / MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "3",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "4",
      "name": "SDA,SDI,SDI/SDO",
      "description": "I2C / MIPI I3C serial data (SDA), 4-wire SPI serial data input (SDI), 3-wire serial data input/output (SDI/SDO)"
    },
    {
      "number": "5",
      "name": "SDO/SA0",
      "description": "4-wire SPI serial data output (SDO), I2C least significant bit of the device address (SA0), MIPI I3C least significant bit of the static address (SA0)"
    },
    {
      "number": "6",
      "name": "CS",
      "description": "Enables SPI, I2C and MIPI I3C / SPI mode selection (1: SPI idle mode / I2C and MIPI I3C communication enabled; 0: SPI communication mode / I2C and MIPI I3C disabled)"
    },
    {
      "number": "7",
      "name": "INT_DRDY",
      "description": "Interrupt or data-ready"
    },
    {
      "number": "8",
      "name": "GND_IO",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "VDD",
      "description": "Power supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lps27hhtw.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97401bfffd9e41956848"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "SP49T-05-12",
  "pages": "22",
  "pins": [
    {
      "number": "1",
      "name": "PP0/SCL/A_IN/A_OUT / F_IN",
      "description": "General Purpose IO / I2C-SCL / Analog ADC Input /Analog Accelerometer or Pressure\nSensor Output / External Reference Frequency Input"
    },
    {
      "number": "2",
      "name": "PP1/SDA/WAKEUP",
      "description": "General Purpose IO / I2C-SDA / External Wake-Up(*)"
    },
    {
      "number": "3",
      "name": "PP2/SWDCLK/WAKEUP",
      "description": "General Purpose IO / Serial Wire Debug Interface Clock/ External Wake-Up(*)"
    },
    {
      "number": "4",
      "name": "GNDD",
      "description": "Digital Ground"
    },
    {
      "number": "5",
      "name": "PP3 / SWDIO /A_IN",
      "description": "General Purpose IO / Serial Wire Debug Interface Input Output/ Analog ADC Input"
    },
    {
      "number": "6",
      "name": "XIN",
      "description": "Crystal Oscillator Input"
    },
    {
      "number": "7",
      "name": "XOUT",
      "description": "Crystal Oscillator Output"
    },
    {
      "number": "8",
      "name": "LFN",
      "description": "LF Receiver Input"
    },
    {
      "number": "9",
      "name": "LFP",
      "description": "LF Receiver Input"
    },
    {
      "number": "10",
      "name": "VDDREG",
      "description": "Internal Regulated Power Supply"
    },
    {
      "number": "11",
      "name": "GNDA",
      "description": "Analog and Power amplifier Ground"
    },
    {
      "number": "12",
      "name": "PAOUT",
      "description": "RF Power Amplifier Output"
    },
    {
      "number": "13",
      "name": "VDDPA/A_OUT",
      "description": "Regulated Power Supply for RF Power Amplifier / Analog Accelerometer or\nPressure Output"
    },
    {
      "number": "14",
      "name": "VDDBAT",
      "description": "Power Supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-SP49T-05-12-DataSheet-v01_00-EN.pdf?fileId=8ac78c8c901008d10190124b254d035f",
  "version": "1.00"
},
{
  "_id": {
    "$oid": "680f97401bfffd9e41956849"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP276D1505",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "NCS",
      "description": "Not-Chip-Select (active-low)"
    },
    {
      "number": "2",
      "name": "CLK",
      "description": "Serial Clock"
    },
    {
      "number": "3",
      "name": "SDI",
      "description": "Serial Data In"
    },
    {
      "number": "4",
      "name": "SDO",
      "description": "Serial Data Out"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "SENTOUT",
      "description": "SENT output"
    },
    {
      "number": "7",
      "name": "NTCIN",
      "description": "NTC Input"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP276D1505-DataSheet-v01_00-EN.pdf?fileId=8ac78c8c7d0d8da4017d0fd7ea482fdd",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f97401bfffd9e4195684a"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lis2de12",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "Res",
      "description": "Connect to GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT_2",
      "description": "Interrupt pin 2"
    },
    {
      "number": "12",
      "name": "INT_1",
      "description": "Interrupt pin 1"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lis2de12.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97401bfffd9e4195684b"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_HAL1563SU",
  "pages": "13",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply and output"
    },
    {
      "number": "2",
      "name": "AUX",
      "description": "Functional test pin, connection to ground is recommended"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_156y_hall-effect_switches_with_current_interface_2-wire_in_sot23_package.pdf",
  "version": "4"
},
{
  "_id": {
    "$oid": "680f97401bfffd9e4195684c"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_stds75",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "SDA",
      "description": "Serial data input/output"
    },
    {
      "number": "2",
      "name": "SCL",
      "description": "Serial clock input"
    },
    {
      "number": "3",
      "name": "!OS/INT",
      "description": "Overlimit signal/interrupt alert output"
    },
    {
      "number": "4",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "5",
      "name": "A2",
      "description": "Address2 input"
    },
    {
      "number": "6",
      "name": "A1",
      "description": "Address1 input"
    },
    {
      "number": "7",
      "name": "A0",
      "description": "Address0 input"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Supply voltage (2.7 V to 5.5 V)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/stds75.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97401bfffd9e4195684d"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "KP219N3621",
  "pages": "10",
  "pins": [
    {
      "number": "1",
      "name": "TEST",
      "description": "Test pin"
    },
    {
      "number": "2",
      "name": "CLOCK / VPROG",
      "description": "External clock for communication / programming voltage"
    },
    {
      "number": "3",
      "name": "DATA IN",
      "description": "Serial data input pin"
    },
    {
      "number": "4",
      "name": "DATA OUT",
      "description": "Serial data output pin"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Circuit ground potential"
    },
    {
      "number": "7",
      "name": "VOUT",
      "description": "Analog pressure signal output"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Circuit ground potential"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-KP219N3621-DS-v01_00-en.pdf?fileId=db3a30432b5786da012b57a13ed40013",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f97401bfffd9e4195684e"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLI4963-1M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLI4963-1M-DataSheet-v01_20-EN.pdf?fileId=5546d462525dbac4015287edce0c27c7",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97401bfffd9e4195684f"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_iis2dh",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "SPI enable, I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "SDO/SA0",
      "description": "SPI serial data output (SDO), I2C less significant bit of the device address (SA0)"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-Wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "Res",
      "description": "Connect to GND"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT_2",
      "description": "Interrupt pin 2"
    },
    {
      "number": "12",
      "name": "INT_1",
      "description": "Interrupt pin 1"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/iis2dh.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97401bfffd9e41956850"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bmi088",
  "pages": "52",
  "pins": [
    {
      "number": "1",
      "name": "INT2",
      "description": "Interrupt pin 2 (accel int #2)"
    },
    {
      "number": "2",
      "name": "NC",
      "description": ""
    },
    {
      "number": "3",
      "name": "VDD",
      "description": "Power supply analog & digital domain (2.4 - 3.6V)"
    },
    {
      "number": "4",
      "name": "GNDA",
      "description": "Ground for analog domain"
    },
    {
      "number": "5",
      "name": "CSB2",
      "description": "SPI Chip select Gyro. SPI: CSB2. I2C; DNC (float)"
    },
    {
      "number": "6",
      "name": "GNDIO",
      "description": "Ground for I/O"
    },
    {
      "number": "7",
      "name": "PS",
      "description": "Protocol select gyroscope SPI: GND. I2C: VDDIO"
    },
    {
      "number": "8",
      "name": "SCL/SCK",
      "description": "SPI: serial clock SCK. I2C: serial clock SCL"
    },
    {
      "number": "9",
      "name": "SDA/SDI",
      "description": "SPI 4-Wire: SDI serial data I. SPI 3-Wire: SDA serial data I/O. I2C: serial data I/O"
    },
    {
      "number": "10",
      "name": "SDO2",
      "description": "SPI Serial data out Gyro. Address select in I2C mode"
    },
    {
      "number": "11",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage (1.2V ...3.6V)"
    },
    {
      "number": "12",
      "name": "INT3",
      "description": "Interrupt pin 3 (gyro int #1)"
    },
    {
      "number": "13",
      "name": "INT4",
      "description": "Interrupt pin 4 (gyro int #2)"
    },
    {
      "number": "14",
      "name": "CSB1",
      "description": "SPI Chip select Accel. SPI: CSB1. I2C: VDDIO or DNC (float)"
    },
    {
      "number": "15",
      "name": "SDO1",
      "description": "SPI Serial data out Accel. Address select in I2C mode"
    },
    {
      "number": "16",
      "name": "INT1",
      "description": "Interrupt pin 1 (accel int #1)"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97401bfffd9e41956851"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_ism303dac",
  "pages": "12",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "2",
      "name": "CS",
      "description": "I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "3",
      "name": "Reserved",
      "description": " Reserved, connected to GND"
    },
    {
      "number": "4",
      "name": "SDA/SDI/SDO",
      "description": "I2C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "C1",
      "description": "Capacitor connection (C1 = 220 nF)"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "0 V"
    },
    {
      "number": "7",
      "name": "INT_MAG/DRDY",
      "description": "Magnetometer interrupt/data-ready signal"
    },
    {
      "number": "8",
      "name": "GND",
      "description": "0 V"
    },
    {
      "number": "9",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "10",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "11",
      "name": "INT2_XL",
      "description": "Accelerometer interrupt 2"
    },
    {
      "number": "12",
      "name": "INT1_XL",
      "description": "Accelerometer interrupt 1"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/ism303dac.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97401bfffd9e41956852"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bma400",
  "pages": "111",
  "pins": [
    {
      "number": "1",
      "name": "SDO",
      "description": "Serial data output in SPI. Address select in I2C mode"
    },
    {
      "number": "2",
      "name": "SDX",
      "description": "SDA serial data I/O in I2C. SDI serial data input in SPI 4W. SDA serial data I/O in SPI 3W"
    },
    {
      "number": "3",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage (1.2V ...3.6V)"
    },
    {
      "number": "4",
      "name": "NC",
      "description": ""
    },
    {
      "number": "5",
      "name": "INT1",
      "description": "Interrupt output 1 (default)"
    },
    {
      "number": "6",
      "name": "INT2",
      "description": "Interrupt output 2 (default)"
    },
    {
      "number": "7",
      "name": "VDD",
      "description": "Power supply for analog & digital domain (1.62V ...3.6V)"
    },
    {
      "number": "8",
      "name": "GNDIO",
      "description": "Ground for I/O"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "Ground for digital & analog"
    },
    {
      "number": "10",
      "name": "CSB",
      "description": "Chip select for SPI mode. I2C: VDDIO"
    },
    {
      "number": "11",
      "name": "NC",
      "description": ""
    },
    {
      "number": "12",
      "name": "SCX",
      "description": "SCK for SPI serial clock. SCL for I2C serial clock"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma400-ds000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97401bfffd9e41956853"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_ICS-40310",
  "pages": "6",
  "pins": [
    {
      "number": "1",
      "name": "OUTPUT",
      "description": "Analog Output Signal"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "VDD",
      "description": "Power Supply. Bypass to GND with a 0.1 µF capacitor."
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sw_piezo/mic/mems-mic/data_sheet/ics-40310-datasheet-v1.2.pdf",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97401bfffd9e41956854"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_lps22hb",
  "pages": "9",
  "pins": [
    {
      "number": "1",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "2",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "3",
      "name": "RES",
      "description": "Connect to GND"
    },
    {
      "number": "4",
      "name": "SDA,SDI,SDI/SDO",
      "description": "I2C serial data (SDA), 4-wire SPI serial data input (SDI), 3-wire serial data input/output (SDI/SDO)"
    },
    {
      "number": "5",
      "name": "SDO/SA0",
      "description": "4-wire SPI serial data output (SDO), I2C least significant bit of the device address (SA0)"
    },
    {
      "number": "6",
      "name": "CS",
      "description": "Enables SPI, I2C and MIPI I3C / SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled)"
    },
    {
      "number": "7",
      "name": "INT_DRDY",
      "description": "Interrupt or data-ready"
    },
    {
      "number": "8",
      "name": "GND_IO",
      "description": "0 V supply"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "10",
      "name": "VDD",
      "description": "Power supply"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/lps22hb.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97401bfffd9e41956855"
  },
  "flag": "old",
  "manufacturer": "TDK",
  "name": "tdk_IAM-20381",
  "pages": "15",
  "pins": [
    {
      "number": "1",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage"
    },
    {
      "number": "2",
      "name": "SCL/SPC",
      "description": "I2C serial clock (SCL); SPI serial clock (SPC)"
    },
    {
      "number": "3",
      "name": "SDA/SDI",
      "description": "I2C serial data (SDA); SPI serial data input (SDI)"
    },
    {
      "number": "4",
      "name": "SA0/SDO",
      "description": "I2C slave address LSB (SA0); SPI serial data output (SDO)"
    },
    {
      "number": "5",
      "name": "CS",
      "description": "Chip select (0 = SPI mode; 1 = I2C mode)"
    },
    {
      "number": "6",
      "name": "INT",
      "description": "Interrupt digital output (totem pole or open-drain)"
    },
    {
      "number": "7",
      "name": "RESV",
      "description": "Reserved. Do not connect."
    },
    {
      "number": "8",
      "name": "FSYNC",
      "description": "Synchronization digital input (optional). Connect to GND if unused."
    },
    {
      "number": "9",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "10",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "11",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "12",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "13",
      "name": "GND",
      "description": "Connect to GND"
    },
    {
      "number": "14",
      "name": "REGOUT",
      "description": "Regulator filter capacitor connection"
    },
    {
      "number": "15",
      "name": "RESV",
      "description": "Reserved. Connect to GND."
    },
    {
      "number": "16",
      "name": "VDD",
      "description": "Power Supply"
    }
  ],
  "type": "sensor",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/mortion-inertial/accelero/data_sheet/ds-000216-iam-20381-typ-v1.0.pdf",
  "version": "1.0"
},
{
  "_id": {
    "$oid": "680f97401bfffd9e41956856"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4968-1K",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4968-1K-DataSheet-v01_20-EN.pdf?fileId=db3a3043397219b6013977a3fb29541c",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97411bfffd9e41956859"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLI5012B E1000",
  "pages": "13",
  "pins": [
    {
      "number": "1",
      "name": "IFC (IIF_IDX)",
      "description": "Interface C: IIF Index"
    },
    {
      "number": "2",
      "name": "SCK",
      "description": "SSC Clock"
    },
    {
      "number": "3",
      "name": "CSQ",
      "description": "SSC Chip Select"
    },
    {
      "number": "4",
      "name": "DATA",
      "description": "SSC Data"
    },
    {
      "number": "5",
      "name": "IFA (IIF_A)",
      "description": "Interface A: IIF Phase A"
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "Supply Voltage"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "8",
      "name": "IFB (IIF_B)",
      "description": "Interface B: IIF Phase B"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLI5012B%20E1000-DS-v01_01-EN.pdf?fileId=5546d4624fb7fef2014ff423fcd077a8",
  "version": "1.1"
},
{
  "_id": {
    "$oid": "680f97411bfffd9e4195685a"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bmi323",
  "pages": "211",
  "pins": [
    {
      "number": "1",
      "name": "SDO",
      "description": "Serial data output in SPI 4-Wire. I2C Address bit-0 select in I2C mode"
    },
    {
      "number": "2",
      "name": "NC",
      "description": ""
    },
    {
      "number": "3",
      "name": "NC",
      "description": ""
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Interrupt pin 1"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage (1.08V ...3.63V)"
    },
    {
      "number": "6",
      "name": "GNDIO",
      "description": "Ground for I/O"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground for digital & analog"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply analog & digital domain (1.71 - 3.63V)"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Interrupt pin 2"
    },
    {
      "number": "10",
      "name": "NC",
      "description": ""
    },
    {
      "number": "11",
      "name": "NC",
      "description": ""
    },
    {
      "number": "12",
      "name": "CSB",
      "description": "Chip select for SPI mode"
    },
    {
      "number": "13",
      "name": "SCX",
      "description": "SCK for SPI serial clock. SCL for I2C serial clock"
    },
    {
      "number": "14",
      "name": "SDX",
      "description": "SDA serial data I/O in I2C. SDI serial data input in SPI 4-Wire. SDA serial data I/O in SPI 3-Wire"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi323-ds000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97411bfffd9e4195685b"
  },
  "flag": "old",
  "manufacturer": "Murata",
  "name": "SCC1300",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "HEAT",
      "description": "Heat sink connection, connect to AVSS_G."
    },
    {
      "number": "2",
      "name": "REFGND_G",
      "description": "Analog reference ground, connect to AVSS_G"
    },
    {
      "number": "3",
      "name": "VREFP_G",
      "description": "Connection for External C for positive reference voltage."
    },
    {
      "number": "4",
      "name": "EXTRESN_G",
      "description": "External Reset, 3.3V Schmitt-trigger input with internal pull-up, High-low\ntransition causes system restart"
    },
    {
      "number": "5",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    },
    {
      "number": "6",
      "name": "AHVVDDS_G",
      "description": "Connection for External C for high voltage analog supply. High voltage pad ~30V"
    },
    {
      "number": "7",
      "name": "LHV",
      "description": "Connection for inductor for high voltage generation, high voltage pad ~30V"
    },
    {
      "number": "8",
      "name": "DVDD_G",
      "description": "Digital Supply Voltage"
    },
    {
      "number": "9",
      "name": "DVSS_G",
      "description": "Digital Supply Return"
    },
    {
      "number": "10",
      "name": "MISO_G",
      "description": "Data Out of SPI Interface, 3.3V level."
    },
    {
      "number": "11",
      "name": "SCK_A",
      "description": "Clk Signal of SPI Interface, 3.3V Schmitt-trigger input"
    },
    {
      "number": "12",
      "name": "MOSI_A",
      "description": "Data In of SPI Interface, 3.3V Schmitt-trigger input"
    },
    {
      "number": "13",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    },
    {
      "number": "14",
      "name": "DVDD_A",
      "description": "Digital Supply Voltage"
    },
    {
      "number": "15",
      "name": "DVSS_A",
      "description": "Digital Supply Return"
    },
    {
      "number": "16",
      "name": "HEAT",
      "description": "Heat sink connection, connect to AVSS_G."
    },
    {
      "number": "17",
      "name": "HEAT",
      "description": "Heat sink connection, connect to AVSS_G."
    },
    {
      "number": "18",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    },
    {
      "number": "19",
      "name": "AVSS_A",
      "description": "Analog Supply Return"
    },
    {
      "number": "20",
      "name": "AVDD_A",
      "description": "Analog Supply Voltage"
    },
    {
      "number": "21",
      "name": "CSB_A",
      "description": "Chip Select of SPI Interface, 3.3V Schmitt-trigger input"
    },
    {
      "number": "22",
      "name": "MISO_A",
      "description": "Data Out of SPI Interface, 3.3V level"
    },
    {
      "number": "23",
      "name": "MOSI_G",
      "description": "Data In of SPI Interface, 3.3V Schmitt-trigger input"
    },
    {
      "number": "24",
      "name": "SCK_G",
      "description": "Clk Signal of SPI Interface, 3.3V Schmitt-trigger input"
    },
    {
      "number": "25",
      "name": "CSB_G",
      "description": "Chip Select of SPI Interface, 3.3V Schmitt-trigger input"
    },
    {
      "number": "26",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    },
    {
      "number": "27",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    },
    {
      "number": "28",
      "name": "AVDD_G",
      "description": "Analog Supply Voltage"
    },
    {
      "number": "29",
      "name": "AVSS_G",
      "description": "Analog Supply Return"
    },
    {
      "number": "30",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    },
    {
      "number": "31",
      "name": "RESERVED",
      "description": "Factory use only, leave floating"
    },
    {
      "number": "32",
      "name": "HEAT",
      "description": "Heat sink connection, connect to AVSS_G."
    }
  ],
  "type": "sensor",
  "url": "https://www.murata.com/-/media/webrenewal/products/sensor/pdf/datasheet/datasheet_scc1300-d04.ashx?la=en-gb&cvid=20190118050232370800",
  "version": "D04"
},
{
  "_id": {
    "$oid": "680f97411bfffd9e4195685c"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4961-2M",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4961-2M-DataSheet-v01_02-EN.pdf?fileId=db3a30433cabdd35013cc965173b6517",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97411bfffd9e4195685d"
  },
  "flag": "old",
  "manufacturer": "Murata",
  "name": "SCA1020",
  "pages": "4",
  "pins": [
    {
      "number": "1",
      "name": "SCK",
      "description": "Serial clock"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "NC"
    },
    {
      "number": "3",
      "name": "MISO",
      "description": "Master in slave out; data output"
    },
    {
      "number": "4",
      "name": "MOSI",
      "description": "Master out slave in; data input"
    },
    {
      "number": "5",
      "name": "Out_2",
      "description": "Y axis Output (Ch 2)"
    },
    {
      "number": "6",
      "name": "VSS",
      "description": "Negative supply voltage (VSS)"
    },
    {
      "number": "7",
      "name": "CSB",
      "description": "Chip select (active low). If only analog outputs are used this should be connected to Vdd or left floating."
    },
    {
      "number": "8",
      "name": "NC",
      "description": "NC"
    },
    {
      "number": "9",
      "name": "ST_2",
      "description": "Self test input for Y axis (Ch 2)"
    },
    {
      "number": "10",
      "name": "ST_1 / Test_in",
      "description": "Self test input for Z axis (Ch 1 ) / Analog test input"
    },
    {
      "number": "11",
      "name": "Out_1",
      "description": "Z axis output (Ch 1)"
    },
    {
      "number": "12",
      "name": "VDD",
      "description": "Positive supply voltage (VDD)"
    }
  ],
  "type": "sensor",
  "url": "https://www.mouser.de/pdfdocs/sca1020d06_product_specification_8263900b.PDF",
  "version": "D06"
},
{
  "_id": {
    "$oid": "680f97411bfffd9e4195685e"
  },
  "flag": "old",
  "manufacturer": "Infineon",
  "name": "TLE4961-3K",
  "pages": "7",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "Q",
      "description": "Output"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "type": "sensor",
  "url": "https://www.infineon.com/dgdl/Infineon-TLE4961-3K-DataSheet-v01_02-EN.pdf?fileId=db3a3043397219b601397247ed8d0030",
  "version": "1.2"
},
{
  "_id": {
    "$oid": "680f97411bfffd9e4195685f"
  },
  "flag": "old",
  "manufacturer": "STMicroelectronics",
  "name": "stm_asm330lhbg1",
  "pages": "8",
  "pins": [
    {
      "number": "1",
      "name": "SDO/SA0",
      "description": "SPI 4-Wire interface serial data output (SDO), I2C less significant bit of the device address (SA0), MIPI I3C least significant bit of the static address (SA0)"
    },
    {
      "number": "2",
      "name": "RES",
      "description": "Connect to Vdd_IO or GND"
    },
    {
      "number": "3",
      "name": "RES",
      "description": "Connect to Vdd_IO or GND"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Programmable interrupt in I2C and SPI"
    },
    {
      "number": "5",
      "name": "VDD_IO",
      "description": "Power supply for I/O pins"
    },
    {
      "number": "6",
      "name": "NC",
      "description": "Connect to VDD_IO or GND or leave unconnected"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "0 V supply"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Programmable interrupt 2 (INT2) / data enabled (DEN)"
    },
    {
      "number": "10",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "11",
      "name": "NC",
      "description": "Leave unconnected"
    },
    {
      "number": "12",
      "name": "CS",
      "description": "I2C/MIPI I3C/SPI mode selection (1: SPI idle mode / I2C/MIPI I3C communication enabled; 0: SPI communication mode / I²C/MIPI I3C disabled)"
    },
    {
      "number": "13",
      "name": "SCL",
      "description": "I2C/MIPI I3C serial clock (SCL), SPI serial port clock (SPC)"
    },
    {
      "number": "14",
      "name": "SDA",
      "description": "I2C/MIPI I3C serial data (SDA), SPI serial data input (SDI), 3-wire interface serial data output (SDO)"
    }
  ],
  "type": "sensor",
  "url": "https://www.st.com/resource/en/datasheet/asm330lhbg1.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f97411bfffd9e41956860"
  },
  "flag": "old",
  "manufacturer": "Bosch Sensortec",
  "name": "bst_bmi270",
  "pages": "135",
  "pins": [
    {
      "number": "1",
      "name": "SDO",
      "description": "Serial data output in SPI 4-Wire. I2C Address bit-0 select in I2C mode"
    },
    {
      "number": "2",
      "name": "ASDX",
      "description": "Aux interface / OIS interface"
    },
    {
      "number": "3",
      "name": "ASCX",
      "description": "Aux interface / OIS interface"
    },
    {
      "number": "4",
      "name": "INT1",
      "description": "Interrupt pin 1"
    },
    {
      "number": "5",
      "name": "VDDIO",
      "description": "Digital I/O supply voltage (1.2V ...3.6V)"
    },
    {
      "number": "6",
      "name": "GNDIO",
      "description": "Ground for I/O"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground for digital & analog"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Power supply analog & digital domain (1.71 - 3.6V)"
    },
    {
      "number": "9",
      "name": "INT2",
      "description": "Interrupt pin 2"
    },
    {
      "number": "10",
      "name": "OCSB",
      "description": "OIS interface"
    },
    {
      "number": "11",
      "name": "OSDO",
      "description": "OIS interface"
    },
    {
      "number": "12",
      "name": "CSB",
      "description": "Chip select for SPI mode"
    },
    {
      "number": "13",
      "name": "SCX",
      "description": "SCK for SPI serial clock. SCL for I2C serial clock"
    },
    {
      "number": "14",
      "name": "SDX",
      "description": "SDA serial data I/O in I2C. SDI serial data input in SPI 4-Wire. SDA serial data I/O in SPI 3-Wire"
    }
  ],
  "type": "sensor",
  "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi270-ds000.pdf",
  "version": ""
},
{
  "_id": {
    "$oid": "680f994b9a2431d66f0beea7"
  },
  "name": "SGD43S-M3-Sx",
  "manufacturer": "Sensirion",
  "type": "Sensor, Environmental Sensor",
  "pins": [
    {
      "number": "1",
      "name": "VIN",
      "description": "Input voltage (AC or DC)"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Connect to ground"
    },
    {
      "number": "3",
      "name": "D+",
      "description": "RS-485 D+/A"
    },
    {
      "number": "4",
      "name": "NO2",
      "description": "Relay contact normally open 2"
    },
    {
      "number": "5",
      "name": "D-",
      "description": "RS-485 D-/B"
    },
    {
      "number": "6",
      "name": "Relay dry contact common 1",
      "description": "Relay dry contact common 1"
    },
    {
      "number": "7",
      "name": "NO1",
      "description": "Relay dry contact normally open 1"
    },
    {
      "number": "8",
      "name": "NC2",
      "description": "Relay contact normally closed 2"
    }
  ],
  "version": "1.2",
  "url": "https://sensirion.com/media/documents/A2A8A39A/67D0903F/Sensirion_TC_DS_SGD43S-M3-Sx_1.pdf",
  "pages": "10"
},
{
  "_id": {
    "$oid": "680f9b729a2431d66f0beea8"
  },
  "name": "STC31-C",
  "manufacturer": "Sensirion",
  "type": "Sensor, Environmental Sensor",
  "pins": [
    {
      "number": "1",
      "name": "VSS",
      "description": "Connect to ground"
    },
    {
      "number": "2",
      "name": "-",
      "description": "Reserved. Do not connect"
    },
    {
      "number": "3",
      "name": "ADDR",
      "description": "I2C Address Selection"
    },
    {
      "number": "4",
      "name": "SCL",
      "description": "Serial Clock (I2C Interface)"
    },
    {
      "number": "5",
      "name": "VSS",
      "description": "Connect to ground"
    },
    {
      "number": "6",
      "name": "VDD",
      "description": "VDD Supply"
    },
    {
      "number": "7",
      "name": "SDA",
      "description": "Bidirectional Serial Data (I2C Interface)"
    },
    {
      "number": "8",
      "name": "-",
      "description": "Reserved. Do not connect"
    },
    {
      "number": "9",
      "name": "VSS",
      "description": "Connect to ground"
    },
    {
      "number": "10",
      "name": "-",
      "description": "Reserved. Do not connect"
    },
    {
      "number": "11",
      "name": "VSS",
      "description": "Connect to ground"
    },
    {
      "number": "12",
      "name": "-",
      "description": "Reserved. Do not connect"
    }
  ],
  "version": "3.3",
  "url": "https://eu.mouser.com/datasheet/2/682/Sensirion_TC_DS_STC31_C-3459977.pdf",
  "pages": "19"
},
{
  "_id": {
    "$oid": "680f9c139a2431d66f0beea9"
  },
  "name": "BME280",
  "manufacturer": "Bosch Sensortec",
  "type": "Sensor, Environmental Sensor",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "2",
      "name": "CSB",
      "description": "Chip select"
    },
    {
      "number": "3",
      "name": "SDI",
      "description": "Serial data input"
    },
    {
      "number": "4",
      "name": "SCK",
      "description": "Serial clock input"
    },
    {
      "number": "5",
      "name": "SDO",
      "description": "Serial data output"
    },
    {
      "number": "6",
      "name": "VDDIO",
      "description": "Digital / Interface supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Analog supply"
    }
  ],
  "version": "1.22",
  "url": "https://eu.mouser.com/datasheet/2/783/bst_bme280_ds002-2238172.pdf",
  "pages": "38",
  "flag": null
},
{
  "_id": {
    "$oid": "680f9c8e9a2431d66f0beeaa"
  },
  "name": "BME688",
  "manufacturer": "Bosch Sensortec",
  "type": "Sensor, Environmental Sensor",
  "pins": [
    {
      "number": "1",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "2",
      "name": "CSB",
      "description": "Chip select"
    },
    {
      "number": "3",
      "name": "SDI",
      "description": "Serial data input"
    },
    {
      "number": "4",
      "name": "SCK",
      "description": "Serial clock input"
    },
    {
      "number": "5",
      "name": "SDO",
      "description": "Serial data output"
    },
    {
      "number": "6",
      "name": "VDDIO",
      "description": "Digital interface supply"
    },
    {
      "number": "7",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "8",
      "name": "VDD",
      "description": "Analog supply"
    }
  ],
  "version": "1.1",
  "url": "https://eu.mouser.com/datasheet/2/783/bst_bme688_fl000-2307034.pdf",
  "pages": "2",
  "flag": null
},
{
  "_id": {
    "$oid": "680f9d9a9a2431d66f0beeab"
  },
  "name": "HDC1000",
  "manufacturer": "Texas Instruments",
  "type": "Sensor, Environmental Sensor",
  "pins": [
    {
      "number": "A1",
      "name": "SCL",
      "description": "Serial clock line for I2C, open-drain; requires a pull-up resistor to VDD"
    },
    {
      "number": "B1",
      "name": "VDD",
      "description": "Supply Voltage"
    },
    {
      "number": "C1",
      "name": "ADR0",
      "description": "Address select pin – hardwired to GND or VDD"
    },
    {
      "number": "D1",
      "name": "ADR1",
      "description": "Address select pin – hardwired to GND or VDD"
    },
    {
      "number": "A2",
      "name": "SDA",
      "description": "Serial data line for I2C, open-drain; requires a pull-up resistor to VDD"
    },
    {
      "number": "B2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "C2",
      "name": "DNC",
      "description": "Do not connect, or, may be connected to GND."
    },
    {
      "number": "D2",
      "name": "DRDYn",
      "description": "Data ready, active low, open-drain. Requires a pull-up resistor to VDD. If not used tie to GND."
    }
  ],
  "version": "JULY 2014–REVISED JANUARY 2016",
  "url": "https://www.ti.com/lit/ds/symlink/hdc1000.pdf?ts=1745853663250&ref_url=https%253A%252F%252Feu.mouser.com%252F",
  "pages": "4"
},
{
  "_id": {
    "$oid": "680f9f199a2431d66f0beeac"
  },
  "name": "HDC302x",
  "manufacturer": "Texas Instruments",
  "type": "Sensor, Environmental Sensor",
  "pins": [
    {
      "number": "1",
      "name": "SDA",
      "description": "Serial data line for I2C, open-drain; requires a pullup resistor."
    },
    {
      "number": "2",
      "name": "ADDR",
      "description": "I2C Device Address Pin.\nFor device addresses 0x44 and 0x45, ADDR1 voltage must be GND.\n0x44 requires ADDR voltage to be GND.\n0x45 requires ADDR voltage to be VDD.\nCan not be left floating."
    },
    {
      "number": "3",
      "name": "ALERT",
      "description": "Interrupt Pin. Push-Pull Output.\nIf not used, must be left floating."
    },
    {
      "number": "4",
      "name": "SCL",
      "description": "Serial clock line for I2C."
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply voltage from 1.62 V to 5.50 V."
    },
    {
      "number": "6",
      "name": "RESET",
      "description": "Reset Pin. Active Low, internal pull-up resistor to VDD. If not used, tie to VDD."
    },
    {
      "number": "7",
      "name": "ADDR1",
      "description": "I2C Device Address Pin.\nFor device addresses 0x46 and 0x47, ADDR1 voltage must be VDD.\n0x46 requires ADDR voltage to be GND.\n0x47 requires ADDR voltage to be VDD.\nCan not be left floating."
    },
    {
      "number": "8",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "9",
      "name": "Thermal Pad",
      "description": "The thermal pad can be soldered, or left unsoldered. If choosing to solder the thermal pad, attach to a pad that is connected to GND, or preferably a floating pad. To minimize thermal mass for maximum heater efficiency or to measure ambient temperature, however, the thermal pad can be left unconnected to the PCB."
    }
  ],
  "version": "REVISED JULY 2024",
  "url": "https://www.ti.com/lit/ds/symlink/hdc3021.pdf?ts=1745841783353&ref_url=https%253A%252F%252Feu.mouser.com%252F",
  "pages": "4"
},
{
  "_id": {
    "$oid": "680fa6669a2431d66f0beead"
  },
  "name": "HTU21D(F) RH/T SENSOR IC",
  "manufacturer": "TE Connectivity",
  "type": "Sensor, Environmental Sensor",
  "pins": [
    {
      "number": "1",
      "name": "DATA",
      "description": "Data bit-stream"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "NC",
      "description": "Must be left unconnected"
    },
    {
      "number": "4",
      "name": "NC",
      "description": "Must be left unconnected"
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Supply Voltage"
    },
    {
      "number": "6",
      "name": "SCK",
      "description": "Selector for RH or Temp"
    }
  ],
  "version": "05/2017",
  "url": "https://eu.mouser.com/datasheet/2/418/5/NG_DS_HPC199_6_A6-1130111.pdf",
  "pages": "8"
},
{
  "_id": {
    "$oid": "680fa7479a2431d66f0beeae"
  },
  "name": "MS8607-02BA01",
  "manufacturer": "TE Connectivity",
  "type": "Sensor, Environmental Sensor",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Positive supply voltage"
    },
    {
      "number": "2",
      "name": "NC",
      "description": ""
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "NC",
      "description": ""
    },
    {
      "number": "5",
      "name": "NC",
      "description": ""
    },
    {
      "number": "6",
      "name": "NC",
      "description": ""
    },
    {
      "number": "7",
      "name": "SDA",
      "description": "I2C data IO"
    },
    {
      "number": "8",
      "name": "SCL",
      "description": "Serial data clock"
    }
  ],
  "version": "06/2017",
  "url": "https://eu.mouser.com/datasheet/2/418/5/NG_DS_MS8607-02BA01_B3-1134999.pdf",
  "pages": "19"
},
{
  "_id": {
    "$oid": "680fa8609a2431d66f0beeaf"
  },
  "name": "Si7021-A20",
  "manufacturer": "Silicon Labs",
  "type": "Sensor, Environmental Sensor",
  "pins": [
    {
      "number": "1",
      "name": "SDA",
      "description": "I2C data"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground. This pin is connected to ground on the circuit board through a trace. Do not connect directly to GND plane."
    },
    {
      "number": "3",
      "name": "DNC",
      "description": "These pins should be soldered to pads on the PCB for mechanical stability; they can be electrically floating or tied to VDD (do not tie to GND)."
    },
    {
      "number": "4",
      "name": "DNC",
      "description": "These pins should be soldered to pads on the PCB for mechanical stability; they can be electrically floating or tied to VDD (do not tie to GND)."
    },
    {
      "number": "5",
      "name": "VDD",
      "description": "Power. This pin is connected to power on the circuit board."
    },
    {
      "number": "6",
      "name": "SCL",
      "description": "I2C clock"
    }
  ],
  "version": "Rev. 1.3",
  "url": "https://eu.mouser.com/datasheet/2/368/Si7021_A20-1397917.pdf",
  "pages": "28"
},
{
  "_id": {
    "$oid": "6810cfcf9a2431d66f0beeb1"
  },
  "name": "TMAG5123-Q1",
  "manufacturer": "Texas Instruments",
  "type": "Sensor, Magnetic Sensor",
  "pins": [
    {
      "number": "1",
      "name": "VCC",
      "description": "2.7-V to 38-V power supply. Connect a ceramic capacitor with a value of at least 0.01 µF\n(minimum) between VCC and ground."
    },
    {
      "number": "2",
      "name": "OUT",
      "description": "Hall sensor open-drain output. The open drain requires a pull-up resistor"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground reference."
    }
  ],
  "version": "AUGUST 2021",
  "url": "https://www.ti.com/lit/ds/symlink/tmag5123-q1.pdf?ts=1745914104327&ref_url=https%253A%252F%252Feu.mouser.com%252F",
  "pages": "3"
},
{
  "_id": {
    "$oid": "6810d03c9a2431d66f0beeb2"
  },
  "name": "TMAG5170",
  "manufacturer": "Texas Instruments",
  "type": "Sensor, Magnetic Sensor",
  "pins": [
    {
      "number": "1",
      "name": "SCK",
      "description": "Serial clock"
    },
    {
      "number": "2",
      "name": "SDI",
      "description": "Serial data in"
    },
    {
      "number": "3",
      "name": "SDO",
      "description": "Serial data out"
    },
    {
      "number": "4",
      "name": "CS",
      "description": "Chip select"
    },
    {
      "number": "5",
      "name": "VCC",
      "description": "Main power supply. Handles 2.3-V to 5.5-V power supply input"
    },
    {
      "number": "6",
      "name": "GND",
      "description": "Ground reference"
    },
    {
      "number": "7",
      "name": "TEST",
      "description": "TI test pin. Should be grounded in application"
    },
    {
      "number": "8",
      "name": "ALERT",
      "description": "Status output/trigger"
    }
  ],
  "version": "SEPTEMBER 2021",
  "url": "https://www.ti.com/lit/ds/symlink/tmag5170.pdf?ts=1745900974430",
  "pages": "3"
},
{
  "_id": {
    "$oid": "6810d1589a2431d66f0beeb3"
  },
  "name": "CT813x",
  "manufacturer": "Allegro MicroSystems",
  "type": "Sensor, Magnetic Sensor",
  "pins": [
    {
      "number": "1",
      "name": "VDD",
      "description": "Supply Voltage"
    },
    {
      "number": "2",
      "name": "OUT",
      "description": "Output Signal (Active Low)"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "Rev. 2",
  "url": "https://www.mouser.de/datasheet/2/1115/Allegro_DS_CT813x_Datasheet_GS_FINAL_R2_v2-3441103.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "6810d2149a2431d66f0beeb4"
  },
  "name": "A31315",
  "manufacturer": "Allegro MicroSystems",
  "type": "Sensor, Magnetic Sensor",
  "pins": [
    {
      "number": "1",
      "name": "VCC",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "OUT",
      "description": "Device output"
    },
    {
      "number": "5",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "6",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "7",
      "name": "NC",
      "description": "Not connected"
    },
    {
      "number": "8",
      "name": "NC",
      "description": "Not connected"
    }
  ],
  "version": "Rev. 10",
  "url": "https://www.mouser.de/datasheet/2/1115/A31315_Datasheet-3178197.pdf",
  "pages": "6"
},
{
  "_id": {
    "$oid": "6810d3199a2431d66f0beeb5"
  },
  "name": "AH4930Q",
  "manufacturer": "Diodes Incorporated",
  "type": "Sensor, Magnetic Sensor",
  "pins": [
    {
      "number": "1",
      "name": "SCL\nINT",
      "description": "Bus clock\nINT output"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "IC ground"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Not used, should be Grounded."
    },
    {
      "number": "4",
      "name": "VDD",
      "description": "Power"
    },
    {
      "number": "5",
      "name": "GND",
      "description": "Not used, should be Grounded"
    },
    {
      "number": "6",
      "name": "SDA",
      "description": "Bus data"
    }
  ],
  "version": "Rev. 1 - 2",
  "url": "https://www.mouser.de/datasheet/2/115/AH4930Q-3572161.pdf",
  "pages": "2"
},
{
  "_id": {
    "$oid": "6810d4969a2431d66f0beeb6"
  },
  "name": "TLE49SR",
  "manufacturer": "Infineon",
  "type": "Sensor, Magnetic Sensor",
  "pins": [
    {
      "number": "1",
      "name": "I/O",
      "description": "PWM/SENT/SPC / programming interface I/O"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "VDD",
      "description": "Supply voltage"
    }
  ],
  "version": "Rev. 1.00",
  "url": "https://www.mouser.de/datasheet/2/196/Infineon_Infineon_TLE49SR_C3_P3_S3_DS_v1_00_EN_pdf-3534391.pdf",
  "pages": "5"
},
{
  "_id": {
    "$oid": "6810d68e9a2431d66f0beeb7"
  },
  "name": "TLE5012BD",
  "manufacturer": "Infineon",
  "type": "Sensor, Magnetic Sensor",
  "pins": [
    {
      "number": "1",
      "name": "IFC1\n(CLK / IIF_IDX / HS3)",
      "description": "Die 1 Interface C:\nExternal Clock / IIF Index / Hall Switch Signal 3"
    },
    {
      "number": "2",
      "name": "SCK1",
      "description": "Die 1 SSC Clock"
    },
    {
      "number": "3",
      "name": "CSQ1",
      "description": "Die 1 SSC Chip Select"
    },
    {
      "number": "4",
      "name": "DATA1",
      "description": "Die 1 SSC Data"
    },
    {
      "number": "5",
      "name": "DATA2",
      "description": "Die 2 SSC Data"
    },
    {
      "number": "6",
      "name": "CSQ2",
      "description": "Die 2 SSC Chip Select"
    },
    {
      "number": "7",
      "name": "SCK2",
      "description": "Die 2 SSC Clock"
    },
    {
      "number": "8",
      "name": "IFC2\n(CLK / IIF_DX / HS3)",
      "description": "Die 2 Interface C:\nExternal Clock / IIF Index / Hall Switch Signal 3"
    },
    {
      "number": "9",
      "name": "IFB2\n(IIF_B / HS2)",
      "description": "Die 2 Interface B:\nIIF Phase B / Hall Switch Signal 2"
    },
    {
      "number": "10",
      "name": "GND2",
      "description": "Die 2 Ground"
    },
    {
      "number": "11",
      "name": "VDD2",
      "description": "Die 2 Supply Voltage"
    },
    {
      "number": "12",
      "name": "IFA2\n(IIF_A / HS1 / PWM / SPC)",
      "description": "Die 2 Interface A:\nIIF Phase A / Hall Switch Signal 1 / PWM / SPC output"
    },
    {
      "number": "13",
      "name": "IFA1\n(IIF_A / HS1 / PWM / SPC)",
      "description": "Die 1 Interface A:\nIIF Phase A / Hall Switch Signal 1 / PWM / SPC output"
    },
    {
      "number": "14",
      "name": "VDD1",
      "description": "Die 1 Supply Voltage"
    },
    {
      "number": "15",
      "name": "GND1",
      "description": "Die 1 Ground"
    },
    {
      "number": "16",
      "name": "IFB1\n(IIF_B / HS2)",
      "description": "Die 1 Interface B:\nIIF Phase B / Hall Switch Signal 2"
    }
  ],
  "version": "Rev. 1.3",
  "url": "https://www.mouser.de/datasheet/2/196/Infineon_TLE5012BD_DataSheet_v01_00_EN-3363975.pdf",
  "pages": "4-5"
},
{
  "_id": {
    "$oid": "6810dac49a2431d66f0beeba"
  },
  "name": "MMC3630KJ",
  "manufacturer": "MEMSIC",
  "type": "Sensor, Magnetic Sensor",
  "pins": [
    {
      "number": "A1",
      "name": "VCAP",
      "description": "Power Supply for SET/RESET Coil"
    },
    {
      "number": "A2",
      "name": "NC",
      "description": "Not Connected"
    },
    {
      "number": "A3",
      "name": "NC",
      "description": "Not Connected"
    },
    {
      "number": "B1",
      "name": "VSA",
      "description": "Connect to Ground"
    },
    {
      "number": "B3",
      "name": "SCL",
      "description": "Serial Clock Line for I2C bus"
    },
    {
      "number": "C1",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "C2",
      "name": "INT",
      "description": "Interrupt Output"
    },
    {
      "number": "C3",
      "name": "SDA",
      "description": "Serial Data Line for I2C bus"
    }
  ],
  "version": "Rev. A",
  "url": "https://www.mouser.de/datasheet/2/821/mcic_s_a0006156243_1-2295250.pdf",
  "pages": "5"
},
{
  "_id": {
    "$oid": "6810dbb09a2431d66f0beebb"
  },
  "name": "MMC5983MA",
  "manufacturer": "MEMSIC",
  "type": "Sensor, Magnetic Sensor",
  "pins": [
    {
      "number": "1",
      "name": "SCL/SPI_SCK",
      "description": "Serial Clock Line for I2C/SPU bus"
    },
    {
      "number": "2",
      "name": "VDD",
      "description": "Power Supply"
    },
    {
      "number": "3",
      "name": "NC",
      "description": "Not Connected"
    },
    {
      "number": "4",
      "name": "SPI_CS",
      "description": "Chip Select line for SPI (active low). Tie to VDDIO for I2C Interface"
    },
    {
      "number": "5",
      "name": "SPI_SDO",
      "description": "SPI Serial Data Out"
    },
    {
      "number": "6",
      "name": "NC",
      "description": "Not Connected"
    },
    {
      "number": "7",
      "name": "NC",
      "description": "Not Connected"
    },
    {
      "number": "8",
      "name": "NC",
      "description": "Not Connected"
    },
    {
      "number": "9",
      "name": "GND",
      "description": "Connect to Ground"
    },
    {
      "number": "10",
      "name": "CAP",
      "description": "Connect a 10uF capacitor for SET/RESET"
    },
    {
      "number": "11",
      "name": "GND",
      "description": "Connect to Ground"
    },
    {
      "number": "12",
      "name": "NC",
      "description": "Not Connected"
    },
    {
      "number": "13",
      "name": "VDDIO",
      "description": "Power supply for I2C and INT"
    },
    {
      "number": "14",
      "name": "NC",
      "description": "Not Connected"
    },
    {
      "number": "15",
      "name": "INT",
      "description": "Interrupt Output"
    },
    {
      "number": "16",
      "name": "SDA/SPI_SDI",
      "description": "Serial Data Line for I2C/SPI bus "
    }
  ],
  "version": "Rev A",
  "url": "https://www.mouser.de/datasheet/2/821/Memsic_09102019_MMC5983MA_Datasheet_Rev_A-1635338.pdf",
  "pages": "9"
},
{
  "_id": {
    "$oid": "6810dc459a2431d66f0beebc"
  },
  "name": "HAL 14xy",
  "manufacturer": "TDK",
  "type": "Sensor, Magnetic Sensor",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "OUT",
      "description": "Output"
    }
  ],
  "version": "March 30, 2022",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_15xy_hall-effect_switches_with_open-drain_output_3-wire_in_to92_package.pdf",
  "pages": "15"
},
{
  "_id": {
    "$oid": "6810dd239a2431d66f0beebd"
  },
  "name": "HAL 3930",
  "manufacturer": "TDK",
  "type": "Sensor, Magnetic Sensor",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply voltage"
    },
    {
      "number": "2",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "TEST1",
      "description": "Test"
    },
    {
      "number": "4",
      "name": "OUT1",
      "description": "PWM/SENT output and programming"
    },
    {
      "number": "5",
      "name": "OUT2",
      "description": "PWM/SENT or Switch output"
    },
    {
      "number": "6",
      "name": "TEST2",
      "description": "Test"
    },
    {
      "number": "7",
      "name": "TEST3",
      "description": "Test"
    },
    {
      "number": "8",
      "name": "TEST4",
      "description": "Test"
    }
  ],
  "version": "March 24, 2022",
  "url": "https://www.mouser.com/catalog/specsheets/TDK_HAL3930.pdf?_gl=1*kpy1nn*_gcl_au*OTkxMjczMDQ1LjE3NDQxMTY4Mzg.*_ga*NDQ4NTkwODM3LjE3NDQxMTY4MzM.*_ga_15W4STQT4T*MTc0NTkyOTk4NS4xNS4xLjE3NDU5MzU0MzMuNjAuMC4w",
  "pages": "50"
},
{
  "_id": {
    "$oid": "6810de8b9a2431d66f0beebe"
  },
  "name": "TCS3530",
  "manufacturer": "ams OSRAM",
  "type": "Sensor, Optical Sensor",
  "pins": [
    {
      "number": "1",
      "name": "INT",
      "description": "Interrupt. Open-drain output."
    },
    {
      "number": "2",
      "name": "PGND",
      "description": "Ground. All voltages are referenced to VSS/PGND, and both ground pins must be connected to ground."
    },
    {
      "number": "3",
      "name": "VDD",
      "description": "Supply voltage (1.8V)"
    },
    {
      "number": "4",
      "name": "VSS",
      "description": "Ground. All voltages are referenced to VSS/PGND, and both ground pins must be connected to ground."
    },
    {
      "number": "5",
      "name": "VBUS",
      "description": "I2C (I3C) bus supply voltage"
    },
    {
      "number": "6",
      "name": "SDA",
      "description": "I2C (I3C) serial data I/O terminal"
    },
    {
      "number": "7",
      "name": "SCL",
      "description": "I2C (I3C) serial bus clock terminal"
    },
    {
      "number": "8",
      "name": "VSYNC/GPIO",
      "description": "Synchronization input or General Purpose open-drain Input/Output"
    }
  ],
  "version": "v3-00",
  "url": "https://www.mouser.de/datasheet/2/588/asset_pdf_27311491-3372189.pdf",
  "pages": "4"
},
{
  "_id": {
    "$oid": "6810e0c09a2431d66f0beebf"
  },
  "name": "OPT3007",
  "manufacturer": "Texas Instruments",
  "type": "Sensor, Optical Sensor",
  "pins": [
    {
      "number": "A1",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "B1",
      "name": "NC",
      "description": "No connection required"
    },
    {
      "number": "C1",
      "name": "VDD",
      "description": "Device power. Connect to a 1.6-V to 3.6-V supply."
    },
    {
      "number": "A2",
      "name": "SCL",
      "description": "I2C clock. Connect with a 10-kΩ resistor to a 1.6-V to 5.5-V supply."
    },
    {
      "number": "B2",
      "name": "NC",
      "description": "No connection required"
    },
    {
      "number": "C2",
      "name": "SDA",
      "description": "I2C data. Connect with a 10-kΩ resistor to a 1.6-V to 5.5-V supply."
    }
  ],
  "version": "AUGUST 2017",
  "url": "https://www.ti.com/lit/ds/symlink/opt3007.pdf?ts=1745936321599&ref_url=https%253A%252F%252Fwww.mouser.de%252F",
  "pages": "3"
},
{
  "_id": {
    "$oid": "6810e2b79a2431d66f0beec1"
  },
  "name": "TCD2565BFG",
  "manufacturer": "Toshiba",
  "type": "Sensor, Optical Sensor",
  "pins": [
    {
      "number": "1",
      "name": "OS3",
      "description": "Output signal 3 (Red or B/W(Even))"
    },
    {
      "number": "2",
      "name": "SS",
      "description": "Ground"
    },
    {
      "number": "3",
      "name": "CP",
      "description": "Clamp gate"
    },
    {
      "number": "4",
      "name": "RS",
      "description": "Reset gate"
    },
    {
      "number": "5",
      "name": "2B",
      "description": "Last stage transfer clock (phase 2)"
    },
    {
      "number": "6",
      "name": "2A",
      "description": "Transfer clock (phase 2)"
    },
    {
      "number": "7",
      "name": "SS",
      "description": "Ground"
    },
    {
      "number": "8",
      "name": "1A",
      "description": "Transfer clock (phase 1)"
    },
    {
      "number": "9",
      "name": "2A",
      "description": "Transfer clock (phase 2)"
    },
    {
      "number": "10",
      "name": "SH3",
      "description": "Shift gate 3"
    },
    {
      "number": "11",
      "name": "SH2",
      "description": "Shift gate 2"
    },
    {
      "number": "12",
      "name": "SH2B",
      "description": "Shift gate 2B"
    },
    {
      "number": "13",
      "name": "SH1",
      "description": "Shift gate 1"
    },
    {
      "number": "14",
      "name": "2A",
      "description": "Transfer clock (phase 2)"
    },
    {
      "number": "15",
      "name": "1A",
      "description": "Transfer clock (phase 1)"
    },
    {
      "number": "16",
      "name": "TG",
      "description": "Transfer gate"
    },
    {
      "number": "17",
      "name": "1A",
      "description": "Transfer clock (phase 1)"
    },
    {
      "number": "18",
      "name": "SW",
      "description": "Switch gate for color or B/W"
    },
    {
      "number": "19",
      "name": "OD",
      "description": "Power supply"
    },
    {
      "number": "20",
      "name": "OD",
      "description": "Power supply"
    },
    {
      "number": "21",
      "name": "OS1",
      "description": "Output signal 1 (Blue)"
    },
    {
      "number": "22",
      "name": "OS2",
      "description": "Output signal 2 (Green or B/W(Odd))"
    }
  ],
  "version": "Rev. 2.1",
  "url": "https://www.mouser.de/datasheet/2/408/TCD2565BFG_Web_Datasheet_en_20190115-2508308.pdf",
  "pages": "3"
},
{
  "_id": {
    "$oid": "6810e4059a2431d66f0beec2"
  },
  "name": "TCD2724DG-1",
  "manufacturer": "Toshiba",
  "type": "Sensor, Optical Sensor",
  "pins": [
    {
      "number": "1",
      "name": "SS",
      "description": "Ground"
    },
    {
      "number": "2",
      "name": "OD",
      "description": "Power supply"
    },
    {
      "number": "3",
      "name": "OD",
      "description": "Power supply"
    },
    {
      "number": "4",
      "name": "2B",
      "description": "Last stage transfer clock (phase 2)"
    },
    {
      "number": "5",
      "name": "RS",
      "description": "Reset gate"
    },
    {
      "number": "6",
      "name": "SS",
      "description": "Ground"
    },
    {
      "number": "7",
      "name": "SS",
      "description": "Ground"
    },
    {
      "number": "8",
      "name": "1A3",
      "description": "Transfer clock 3 (phase 1)"
    },
    {
      "number": "9",
      "name": "2A3",
      "description": "Transfer clock 3 (phase 2)"
    },
    {
      "number": "10",
      "name": "1A2",
      "description": "Transfer clock 2 (phase 1)"
    },
    {
      "number": "11",
      "name": "SH",
      "description": "Shift gate"
    },
    {
      "number": "12",
      "name": "SW",
      "description": "Switch gate (Sample and hold output select)"
    },
    {
      "number": "13",
      "name": "2A2",
      "description": "Transfer clock 2 (phase 2)"
    },
    {
      "number": "14",
      "name": "2A1",
      "description": "Transfer clock 1 (phase 2)"
    },
    {
      "number": "15",
      "name": "1A1",
      "description": "Transfer clock 1 (phase 1)"
    },
    {
      "number": "16",
      "name": "SS",
      "description": "Ground"
    },
    {
      "number": "17",
      "name": "OS1",
      "description": "Output signal 1 (Blue(Odd))"
    },
    {
      "number": "18",
      "name": "OS2",
      "description": "Output signal 2 (Blue(Even))"
    },
    {
      "number": "19",
      "name": "OS4",
      "description": "Output signal 4 (Green(Even))"
    },
    {
      "number": "20",
      "name": "OS3",
      "description": "Output signal 3 (Green(Odd))"
    },
    {
      "number": "21",
      "name": "OS5",
      "description": "Output signal 5 (Red(Odd))"
    },
    {
      "number": "22",
      "name": "OS6",
      "description": "Output signal 6 (Red(Even))"
    }
  ],
  "version": "Rev.2.1",
  "url": "https://www.mouser.de/datasheet/2/408/TCD2724DG_1_Web_Datasheet_en_20190115-2508319.pdf",
  "pages": "3"
},
{
  "_id": {
    "$oid": "6813250666384dbbe3a97dac"
  },
  "name": "TMCS1123-Q1",
  "manufacturer": "Texas Instruments",
  "type": "Sensor, Current Sensor",
  "pins": [
    {
      "number": "1",
      "name": "IN+",
      "description": "Input current positive pin"
    },
    {
      "number": "2",
      "name": "IN-",
      "description": "Input current negative pin"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    },
    {
      "number": "4",
      "name": "ALERT",
      "description": "Sensor diagnostics PWM output, open-drain active low. Connect pin to GND if not used."
    },
    {
      "number": "5",
      "name": "VREF",
      "description": "Zero current output voltage reference. Leave pin floating if not used."
    },
    {
      "number": "6",
      "name": "VOUT",
      "description": "Output voltage"
    },
    {
      "number": "7",
      "name": "OC",
      "description": "Overcurrent output, open-drain active low. Connect pin to GND if not used."
    },
    {
      "number": "8",
      "name": "VS",
      "description": "Power supply"
    },
    {
      "number": "9",
      "name": "VOC",
      "description": "Overcurrent threshold. Sets overcurrent threshold. Connect pin to VS if not used."
    },
    {
      "number": "10",
      "name": "NC",
      "description": "Reserved. Pin can be connected to GND or left floating."
    }
  ],
  "version": "JANUARY 2025",
  "url": "https://www.ti.com/lit/ds/symlink/tmcs1123-q1.pdf?ts=1745774841770&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FTMCS1123-Q1",
  "pages": "4"
},
{
  "_id": {
    "$oid": "6813341d66384dbbe3a97dae"
  },
  "name": "tdk_HAL1566SU",
  "manufacturer": "TDK",
  "type": "sensor",
  "pins": [
    {
      "number": "1",
      "name": "VSUP",
      "description": "Supply and output"
    },
    {
      "number": "2",
      "name": "AUX",
      "description": "Functional test pin, connection to ground is recommended"
    },
    {
      "number": "3",
      "name": "GND",
      "description": "Ground"
    }
  ],
  "version": "4",
  "url": "https://product.tdk.com/system/files/dam/doc/product/sensor/switch/hall-switch/data_sheet/hal_156y_hall-effect_switches_with_current_interface_2-wire_in_sot23_package.pdf",
  "pages": "13",
  "flag": null
}]