Add Innr SP 244 v2 v1.9.30

[GerryInnr]

OTA file

1166-0336-191e3685-sp244v2-1.9.30.zip

Manufacturer name

Innr

Release notes

This updates the Innr SP 244 v2 smart plug to firmware version 1.9.30.

Note: Please reload ZHA or restart Home Assistant shortly after this update is fully applied to avoid an incorrectly increased "summation delivered" state.

Note: The relay may turn on or off during the upgrade process.

Changes compared to version 1.7.23 and older

• Fixed attribute reporting failing after power-cycle
• Improved default attribute reporting settings
• Improved thresholds for the resettable voltage and current overload protection
• Added possibility to disable voltage overload protection
• kWh in 3 decimals instead of 2
• Added Multiplier and Divisor for kWh
• Various bug fixes and performance improvements

Disabling voltage overload protection

To disable voltage overload protection:

1. Keep the button pressed between 15 and 20 seconds, then release
2. After 5 seconds, the LED will start quick-blinking; keep the button pressed
3. After 10 seconds, blinking stops; keep the button pressed
4. After 15 seconds, the LED will start quick-blinking again
5. Release the button. The LED will slow-blink 3 times to indicate success

Enable again in the same way.

Enabled/disabled state is persisted over power-cycles, even if not connected to a bridge.
While voltage overload protection is disabled, every on/off action will double-blink the LED before assuming final state.

Current overload protection cannot be disabled.

Overload behavior

• If the voltage or current overload protection triggers, the plug switches off and fast-blinks its LED
• If the cause was voltage overload, the plug will go back to normal operation automatically when the overload condition disappears
• If the cause was current overload, the plug will stay off and in overload condition until manually operated, either with the button or by power-cycling

How to handle existing images of the same type

Keep all (standard)

Optional metadata

No response

Checklist

• The OTA image provided is in a supported format (e.g., .zigbee, .ota, or a ZIP containing one of these)
• I have filled out the release notes to the best of my ability
• The OTA image is tested and verified to work on a physical device

Additional information

No response

[zigpy-bot]

✅ Successfully processed your OTA submission! A pull request has been created with your changes:

• Add Innr SP 244 v2 smart plug v1.9.30 #22

[zigpy-bot]

✅ Successfully processed your OTA submission! A pull request has been created with your changes:

• Add Innr SP 244 v2 smart plug v1.9.30 #22