Some code stealed and modified from https://github.com/Teapot174/ESP-HACK/
ESP-STUN is a powerful universal firmware for the ESP32, built for RF research and pentesting of radio frequencies, Bluetooth, infrared signals and GPIO integrations.
The project targets enthusiasts and pentesters who want to explore protocols and devices in Sub-GHz ranges and other wireless technologies.
The firmware is stable within its declared functionality, but some features are marked as "in development". Use the device according to the laws in your region.
This firmware is designed exclusively for research purposes and hardware testing. By using the firmware, you must comply with the laws of your region. The firmware creator is not responsible for your actions. Jammers are ILLEGAL.
Later...
| Component | Link |
|---|---|
| ESP32-WROOM | TAP |
| CC1101 | TAP |
| Display SH1106 | TAP |
| SD Мodule | TAP |
| Buttons | TAP |
| IR-TX, IR-RX | TAP |
| Module | Pin | Pin | Pin | Pin | Pin | Pin | Pin |
|---|---|---|---|---|---|---|---|
| 📺 Display | VCC → 3V3 | GND → GND | SCL → G22 | SDA → G21 | - | - | - |
| 🔘 Buttons | UP → G27 | DOWN → G26 | OK → G33 | BACK → G32 | - | - | - |
| 📡 CC1101 | 1 → GND | 2 → 3V3 | 3 → G4 | 4 → G15 | 5 → G18 | 6 → G23 | 7 → G19 |
| 💡 IR | IR-T → G12 | IR-R → G14 | - | - | - | - | - |
| 🔌 GPIO | A → G2 | B → G25 | C → G17 | D → G16 | E → G13 | F → G12 | - |
| 💾 SD Card | 3v3 → 3v3 | CS → G5 | MOSI → G23 | CLK → G18 | MISO → G19 | GND → GND | - |
During operation ESP-STUN may show the following errors:
| Error code | ❌ Problem | 🛠️ Possible fix |
|---|---|---|
| 0x000 | SD-Card initialization failed | 🛠️ Format the SD card as FAT32 or replace it. |
| 0x001 | CC1101 initialization failed | 🛠️ Check wiring and module functionality (power, SPI, contacts). |
| 0x002 | NRF24 initialization failed | 🛠️ Verify chosen pins/connections and reboot the device. |
| simbols in commits | means |
|---|---|
| ** | FULL STEALED |
| * | STEALED AND EDITED |
