QuackPack-DuckDisplay

A display library guaranteed to work alongside the ClusterDuck Protocol firmware

Setup

#include "AdafruitDisplay.h"
#include "logo.h"
#define SCREEN_WIDTH 128
#define SCREEN_HEIGHT 64
#define OLED_RESET    -1// 16 heltec v2
#define SDA_PIN 21 //4 heltec v2
#define SLC_PIN 22 //15 heltec v2
AdafruitDisplay driver(SCREEN_WIDTH, SCREEN_HEIGHT, OLED_RESET);

void setup() {
    driver.setLogo(LOGO);
    driver.launch();
    driver.showLogo(AdafruitDisplay::BITMAP);
    delay(3000);
    driver.display.setTextSize(1);
    driver.display.setTextColor(SSD1306_WHITE);
    driver.display.setCursor(0,0);
    driver.showDefaultScreen();
    driver.display.display();
}

void loop() {

    driver.clear();
    delay(3000);
    driver.display.setCursor(0,0);
    driver.display.println("Printing to the display!");
    driver.display.display();

}

Using with the U8G2 Library

The U8G2 library supports many different displays, and the U8G2Display class can be used to wrap any of the supported U8G2 drivers. Below is an example of using the U8G2_SSD1306_128X64_NONAME_F_HW_I2C driver with the U8G2Display class.

#include "U8G2Display.h"
#include "logo.h"

#define SCREEN_WIDTH 128
#define SCREEN_HEIGHT 64
#define SDA_PIN 21 //4 heltec v2
#define SCL_PIN 22 //15 heltec v2
 U8G2_SSD1306_128X64_NONAME_F_HW_I2C driver(U8G2_R0,U8X8_PIN_NONE, SCL_PIN, SDA_PIN);
U8G2Display<U8G2_SSD1306_128X64_NONAME_F_HW_I2C> disp(SCREEN_WIDTH, SCREEN_HEIGHT,driver, U8X8_PIN_NONE);

The rest of the code is similar to the previous example, but note the differences in the main.cpp in the examples directory.