add multiir_motion_MIR-IR100

drivers/SmartThings/zigbee-motion-sensor/fingerprints.yml

@@ -209,6 +209,11 @@ zigbeeManufacturer:
     manufacturer: sengled
     model: E1M-G7H
     deviceProfileName: motion-battery
+  - id: "MultIR/MIR-IR100"
+    deviceLabel: MultiIR Motion Detector MIR-IR100
+    manufacturer: MultIR
+    model: MIR-IR100
+    deviceProfileName: motion-battery-illuminance-sensitivity-frequency
 zigbeeGeneric:
   - id: kickstarter/motion/1
     deviceLabel: SmartThings Motion Sensor

drivers/SmartThings/zigbee-motion-sensor/profiles/motion-battery-illuminance-sensitivity-frequency.yml

@@ -0,0 +1,28 @@
+name: motion-battery-illuminance-sensitivity-frequency
+components:
+  - id: main
+    capabilities:
+      - id: motionSensor
+        version: 1
+      - id: illuminanceMeasurement
+        version: 1
+      - id: stse.sensitivityAdjustment
+        version: 1
+      - id: battery
+        version: 1        
+      - id: firmwareUpdate
+        version: 1
+      - id: refresh
+        version: 1
+    categories:
+      - name: MotionSensor
+preferences:
+  - title: "检测频率/秒-detection frequency/sec"
+    name: detectionfrequency
+    description: "Sensor detects frequency unit: seconds"
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 10
+      maximum: 1800
+      default: 60

drivers/SmartThings/zigbee-motion-sensor/src/MultiIR/can_handle.lua

@@ -0,0 +1,13 @@
+-- Copyright 2026 SmartThings, Inc.
+-- Licensed under the Apache License, Version 2.0
+
+return function(opts, driver, device, ...)
+  local FINGERPRINTS = require "MultiIR.fingerprints"
+  for _, fingerprint in ipairs(FINGERPRINTS) do
+    if device:get_manufacturer() == fingerprint.mfr and device:get_model() == fingerprint.model then
+      local subdriver = require("MultiIR")
+      return true, subdriver
+    end
+  end
+  return false
+end

drivers/SmartThings/zigbee-motion-sensor/src/MultiIR/fingerprints.lua

@@ -0,0 +1,6 @@
+-- Copyright 2026 SmartThings, Inc.
+-- Licensed under the Apache License, Version 2.0
+
+return {
+  { mfr = "MultIR", model = "MIR-IR100" }
+}

drivers/SmartThings/zigbee-motion-sensor/src/MultiIR/init.lua

@@ -0,0 +1,123 @@
+-- Copyright 2026 SmartThings, Inc.
+-- Licensed under the Apache License, Version 2.0
+
+local zcl_clusters = require "st.zigbee.zcl.clusters"
+local capabilities = require "st.capabilities"
+local data_types = require "st.zigbee.data_types"
+local FrameCtrl = require "st.zigbee.zcl.frame_ctrl"
+local zcl_messages = require "st.zigbee.zcl"
+local messages = require "st.zigbee.messages"
+local zb_const = require "st.zigbee.constants"
+local read_attribute = require "st.zigbee.zcl.global_commands.read_attribute"
+
+local sensitivityAdjustment = capabilities["stse.sensitivityAdjustment"]
+local sensitivityAdjustmentCommandName = "setSensitivityAdjustment"
+local IASZone = zcl_clusters.IASZone
+local IASZone_PRIVATE_COMMAND_ID = 0xF4
+
+local PREF_SENSITIVITY_VALUE_HIGH = 3
+local PREF_SENSITIVITY_VALUE_MEDIUM = 2
+local PREF_SENSITIVITY_VALUE_LOW = 1
+
+local function send_iaszone_private_cmd(device, priv_cmd, data)
+  local frame_ctrl = FrameCtrl(0x00)
+  frame_ctrl:set_cluster_specific()
+
+  local zclh = zcl_messages.ZclHeader({
+    frame_ctrl = frame_ctrl,
+    cmd = data_types.ZCLCommandId(priv_cmd)
+  })
+
+  local message_body = zcl_messages.ZclMessageBody({
+    zcl_header = zclh,
+    zcl_body = data_types.Uint16(data)
+  })
+
+  local addr_header = messages.AddressHeader(
+    zb_const.HUB.ADDR,
+    zb_const.HUB.ENDPOINT,
+    device:get_short_address(),
+    device:get_endpoint(IASZone.ID),
+    zb_const.HA_PROFILE_ID,
+    IASZone.ID
+  )
+
+  local zigbee_msg = messages.ZigbeeMessageTx({
+    address_header = addr_header,
+    body = message_body
+  })
+
+  device:send(zigbee_msg)
+end
+
+local function iaszone_attr_sen_handler(driver, device, value, zb_rx)
+  if value.value == PREF_SENSITIVITY_VALUE_HIGH then
+    device:emit_event(sensitivityAdjustment.sensitivityAdjustment.High())
+  elseif value.value == PREF_SENSITIVITY_VALUE_MEDIUM then
+    device:emit_event(sensitivityAdjustment.sensitivityAdjustment.Medium())
+  elseif value.value == PREF_SENSITIVITY_VALUE_LOW then
+    device:emit_event(sensitivityAdjustment.sensitivityAdjustment.Low())
+  end
+end
+
+local function send_sensitivity_adjustment_value(device, value)
+  device:send(IASZone.attributes.CurrentZoneSensitivityLevel:write(device, value))
+end
+
+local function sensitivity_adjustment_capability_handler(driver, device, command)
+  local sensitivity = command.args.sensitivity
+  if sensitivity == 'High' then
+    send_sensitivity_adjustment_value(device, PREF_SENSITIVITY_VALUE_HIGH)
+  elseif sensitivity == 'Medium' then
+    send_sensitivity_adjustment_value(device, PREF_SENSITIVITY_VALUE_MEDIUM)
+  elseif sensitivity == 'Low' then
+    send_sensitivity_adjustment_value(device, PREF_SENSITIVITY_VALUE_LOW)
+  end
+  device:send(IASZone.attributes.CurrentZoneSensitivityLevel:read(device))
+end
+
+local function added_handler(self, device)
+  device:emit_event(capabilities.motionSensor.motion.inactive())
+  device:emit_event(sensitivityAdjustment.sensitivityAdjustment.High())
+  device:emit_event(capabilities.battery.battery(100))
+  device:send(IASZone.attributes.CurrentZoneSensitivityLevel:read(device))
+end
+
+local function do_configure(self, device)
+  device:configure()
+end
+
+local function info_changed(driver, device, event, args)
+  for name, value in pairs(device.preferences) do
+    if (device.preferences[name] ~= nil and args.old_st_store.preferences[name] ~= device.preferences[name]) then
+      if (name == "detectionfrequency") then
+        local detectionfrequency = tonumber(device.preferences.detectionfrequency)
+        send_iaszone_private_cmd(device, IASZone_PRIVATE_COMMAND_ID, detectionfrequency)
+      end
+    end
+  end
+end
+
+local MultiIR_motion_handler = {
+  NAME = "MultiIR motion handler",
+  lifecycle_handlers = {
+    added = added_handler,
+    doConfigure = do_configure,
+  infoChanged = info_changed
+  },
+  capability_handlers = {
+    [sensitivityAdjustment.ID] = {
+      [sensitivityAdjustmentCommandName] = sensitivity_adjustment_capability_handler,
+    }
+  },
+  zigbee_handlers = {
+    attr = {
+      [IASZone.ID] = {
+        [IASZone.attributes.CurrentZoneSensitivityLevel.ID] = iaszone_attr_sen_handler
+      }
+    }
+  },
+  can_handle = require("MultiIR.can_handle")
+}
+
+return MultiIR_motion_handler

drivers/SmartThings/zigbee-motion-sensor/src/init.lua

@@ -118,6 +118,7 @@ local zigbee_motion_driver = {
     lazy_load_if_possible("smartsense"),
     lazy_load_if_possible("thirdreality"),
     lazy_load_if_possible("sengled"),
+	lazy_load_if_possible("MultiIR"),
   },
   additional_zcl_profiles = {
     [0xFC01] = true