Skip to content

Continuous Integration

Jump to bottom
Raviv Rachmiel edited this page Apr 3, 2017 · 1 revision

Code Coverage

Checking Coverage

Coverage checking in this project is done with the Ocaml plugin which you can find here

Spartanizer

  • Code coverage of the "il.org.spartan.spartanizer.tippers" should always be at least 70.0 % and for each tipper the code coverage should be at least 65%
  • When adding a new Tipper, you should always write test (preferably TDD) and the coverage should be at any given time at least 65%
  • If by any chance you see that the code coverage of all "il.org.spartan.spartanizer.tippers" is less than 70%, you should open an issue about it and try to fix it ASAP

Athenizer

  • Code coverage of the "il.org.spartan.bloater.bloaters" should always be at least 75.0 % and for each bloater the code coverage should be at least 70%
  • When adding a new Tipper, you should always write test (preferably TDD) and the coverage should be at any given time at least 70%
  • If by any chance you see that the code coverage of all "il.org.spartan.bloater.bloaters" is less than 75%, you should open an issue about it and try to fix it ASAP

Clone this wiki locally