Add NXP LPC54S018M-EVK port

.github/workflows/codespell.yml

@@ -23,4 +23,4 @@ jobs:
         uses: codespell-project/actions-codespell@v2
         with:
           skip: .git,./IDE,*.der,*.pem
-          ignore_words_list: inh,inout,keypair,nd,parm,rcv,ser,tha,HSI,TE,UE,Synopsys,synopsys
+          ignore_words_list: inh,inout,keypair,nd,parm,rcv,ser,tha,HSI,TE,UE,Synopsys,synopsys,FRO

.github/workflows/lpc54s018.yml

@@ -0,0 +1,32 @@
+name: LPC54S018 Build
+
+on:
+  push:
+    branches: [ 'master', 'main', 'release/**' ]
+  pull_request:
+    branches: [ '*' ]
+
+jobs:
+  lpc54s018_build:
+    runs-on: ubuntu-latest
+    timeout-minutes: 10
+
+    steps:
+      - uses: actions/checkout@v4
+
+      - name: Install ARM toolchain
+        run: |
+          set -euo pipefail
+          sudo apt-get update
+          sudo apt-get install -y gcc-arm-none-eabi
+
+      - name: Build LPC54S018 firmware
+        run: |
+          set -euo pipefail
+          make -C src/port/lpc54s018
+
+      - name: Verify binary
+        run: |
+          set -euo pipefail
+          test -f src/port/lpc54s018/app.bin
+          arm-none-eabi-size src/port/lpc54s018/app.elf

Makefile

@@ -123,6 +123,8 @@ CPPCHECK_FLAGS=--enable=warning,performance,portability,missingInclude \
 			   --suppress=comparePointers:src/port/stm32n6/syscalls.c \
 			   --suppress=comparePointers:src/port/va416xx/startup.c \
 			   --suppress=comparePointers:src/port/va416xx/syscalls.c \
+			   --suppress=comparePointers:src/port/lpc54s018/startup.c \
+			   --suppress=comparePointers:src/port/lpc54s018/syscalls.c \
 			   --disable=style \
 			   --std=c99 --language=c \
 			   --platform=unix64 \

src/port/lpc54s018/Makefile

@@ -0,0 +1,73 @@
+CC := arm-none-eabi-gcc
+OBJCOPY := arm-none-eabi-objcopy
+SIZE := arm-none-eabi-size
+
+ROOT := ../../..
+
+CFLAGS := -mcpu=cortex-m4 -mthumb -mfloat-abi=soft
+CFLAGS += -Os -ffreestanding -fdata-sections -ffunction-sections
+CFLAGS += -g -ggdb -Wall -Wextra -Werror
+CFLAGS += -I. -I$(ROOT) -I$(ROOT)/src -I$(ROOT)/src/port/lpc_enet
+
+CFLAGS_EXT := $(filter-out -Werror,$(CFLAGS))
+CFLAGS_EXT += -Wno-unused-variable -Wno-unused-function -Wno-unused-parameter
+CFLAGS_EXT += -Wno-sign-compare -Wno-missing-field-initializers
+
+LDSCRIPT ?= target_ram.ld
+LDFLAGS := -nostdlib -T $(LDSCRIPT) -Wl,-gc-sections
+
+APP_SRCS := startup.c ivt.c syscalls.c main.c
+APP_OBJS := $(patsubst %.c,%.o,$(APP_SRCS))
+
+# Shared LPC ENET driver (src/port/lpc_enet/)
+LPC_ENET_SRC := $(ROOT)/src/port/lpc_enet/lpc_enet.c
+LPC_ENET_OBJ := lpc_enet.o
+
+# wolfIP core
+WOLFIP_SRC := $(ROOT)/src/wolfip.c
+WOLFIP_OBJ := wolfip.o
+
+ALL_OBJS := $(APP_OBJS) $(LPC_ENET_OBJ) $(WOLFIP_OBJ)
+
+all: app.bin
+	@echo "Built LPC54S018M-EVK wolfIP port"
+	@$(SIZE) app.elf
+
+app.elf: $(ALL_OBJS) $(LDSCRIPT)
+	$(CC) $(CFLAGS) $(ALL_OBJS) $(LDFLAGS) \
+	    -Wl,--start-group -lc -lm -lgcc -lnosys -Wl,--end-group -o $@
+
+app.bin: app.elf
+	$(OBJCOPY) -O binary $< $@
+	python3 fix_checksum.py $@
+
+%.o: %.c
+	$(CC) $(CFLAGS) -c $< -o $@
+
+# Shared LPC ENET driver (include board header for LPC_ENET_* defines)
+$(LPC_ENET_OBJ): $(LPC_ENET_SRC)
+	$(CC) $(CFLAGS) -include lpc54s018_eth.h -c $< -o $@
+
+$(WOLFIP_OBJ): $(WOLFIP_SRC)
+	$(CC) $(CFLAGS_EXT) -c $< -o $@
+
+clean:
+	rm -f *.o app.elf app.bin
+
+size: app.elf
+	@$(SIZE) app.elf
+
+.PHONY: all clean size help
+
+help:
+	@echo "LPC54S018M-EVK wolfIP Build System"
+	@echo ""
+	@echo "  make                Build app.bin"
+	@echo "  make clean          Remove build artifacts"
+	@echo "  make size           Show memory usage"
+	@echo ""
+	@echo "Flashing (on-board Link2 CMSIS-DAP):"
+	@echo "  pyocd flash -t lpc54608 app.elf"
+	@echo ""
+	@echo "Testing:"
+	@echo "  ping 192.168.0.200"

src/port/lpc54s018/README.md

@@ -0,0 +1,175 @@
+# wolfIP LPC54S018M-EVK Port
+
+Bare-metal port of wolfIP for the NXP LPCXpresso54S018M development board, featuring an Ethernet driver and TCP/IP echo server example.
+
+## Quick Start
+
+1. **Build:**
+   ```bash
+   cd src/port/lpc54s018
+   make
+   ```
+
+2. **Flash to board (RAM-loaded via on-board Link2):**
+   ```bash
+   bash flash.sh
+   ```
+
+3. **Monitor UART output** (115200 baud on /dev/ttyACM0):
+   ```bash
+   screen /dev/ttyACM0 115200
+   ```
+   Get the device IP address from the DHCP output.
+
+4. **Test** (replace `<device-ip>` with IP from step 3):
+   ```bash
+   # TCP Echo
+   echo "Hello" | nc <device-ip> 7
+
+   # Ping
+   ping <device-ip>
+   ```
+
+## Hardware Requirements
+
+- LPCXpresso54S018M development board (NXP OM40003)
+- Ethernet connection (RMII, RJ45 at J4)
+- USB cable for debug (J8, on-board Link2 CMSIS-DAP)
+
+## Software Requirements
+
+- ARM GCC toolchain (`arm-none-eabi-gcc`)
+- pyocd (`pip install pyocd`)
+- Serial terminal (screen, minicom, picocom)
+
+### Installing Dependencies (Ubuntu/Debian)
+
+```bash
+sudo apt install gcc-arm-none-eabi
+pip install pyocd
+```
+
+## Building
+
+```bash
+cd src/port/lpc54s018
+make
+```
+
+This produces `app.elf` and `app.bin`.
+
+### Checking Memory Usage
+
+```bash
+make size
+```
+
+```
+   text    data     bss     dec     hex filename
+  52000    1732   53076  106808   1a138 app.elf
+```
+
+## Flashing
+
+```bash
+bash flash.sh
+```
+
+The flash script loads `app.elf` into SRAM via pyocd and starts execution. Uses `-t lpc54608` as target type since `lpc54s018` is not in pyocd's built-in list.
+
+## Serial Console
+
+Connect to the USB serial port at 115200 baud:
+
+```bash
+screen /dev/ttyACM0 115200
+```
+
+## Example Output
+
+```
+=== wolfIP LPC54S018M-EVK ===
+PHY addr=0 link=UP
+Starting DHCP...
+Ready! ping <ip> / echo test | nc <ip> 7
+DHCP bound: 192.168.0.138
+```
+
+## Network Configuration
+
+### DHCP (Default)
+
+DHCP is enabled by default. The board obtains its IP automatically and prints it to UART. Falls back to static IP after 30 seconds if no DHCP server responds.
+
+### Static IP
+
+Set `WOLFIP_ENABLE_DHCP` to `0` in `config.h`:
+
+```c
+#define WOLFIP_ENABLE_DHCP      0
+#define WOLFIP_IP               "192.168.1.10"
+#define WOLFIP_NETMASK          "255.255.255.0"
+#define WOLFIP_GW               "192.168.1.1"
+```
+
+## Testing TCP Echo Server
+
+```bash
+# Test ICMP
+ping <device-ip>
+
+# Test TCP echo (port 7)
+echo "Hello wolfIP!" | nc <device-ip> 7
+
+# Interactive
+nc <device-ip> 7
+```
+
+## Jumper Settings
+
+| Jumper | Position | Function |
+|--------|----------|----------|
+| JP11 | 1-2 (default) | Ethernet TXD/RXD |
+| JP12 | 1-2 (default) | Ethernet TXD/RXD |
+| JP14 | 1-2 (EN) | ENET MDC |
+| JP15 | 1-2 (EN) | ENET MDIO |
+| JP5 | Open (default) | Link2 normal boot |
+
+## Files
+
+| File | Description |
+|------|-------------|
+| `main.c` | Application entry, wolfIP init, echo server |
+| `../lpc_enet/lpc_enet.c` | Ethernet MAC/DMA driver (shared) |
+| `../lpc_enet/lpc_enet.h` | Ethernet driver header (shared) |
+| `lpc54s018_eth.h` | Board-specific ENET parameters |
+| `startup.c` | Startup code and data initialization |
+| `ivt.c` | Interrupt vector table + SPIFI config |
+| `syscalls.c` | Newlib syscall stubs |
+| `target_ram.ld` | Linker script (RAM execution) |
+| `target.ld` | Linker script (SPIFI flash boot) |
+| `config.h` | wolfIP stack configuration |
+| `fix_checksum.py` | LPC boot ROM vector checksum tool |
+| `Makefile` | Build system |
+
+## Troubleshooting
+
+### No Serial Output
+- Check J8 (USB Debug-Link) is connected, not J1
+- Check JP5 is open (not shunted)
+- Verify baud rate is 115200
+
+### Ethernet Not Responding
+- Verify cable is in J4, check RJ45 link LEDs are lit
+- Check JP14 and JP15 are both in EN position
+- If using static IP, ensure host is on the same subnet
+
+### pyocd Cannot Find Target
+- Use `-t lpc54608` as target type
+- Add udev rule: `SUBSYSTEM=="usb", ATTR{idVendor}=="1fc9", MODE="0666"`
+
+## License
+
+This code is part of wolfIP and is licensed under GPLv3. See the LICENSE file in the repository root for details.
+
+Copyright (C) 2026 wolfSSL Inc.

src/port/lpc54s018/config.h

@@ -0,0 +1,68 @@
+/* config.h
+ *
+ * wolfIP configuration for LPC54S018M-EVK
+ *
+ * Copyright (C) 2026 wolfSSL Inc.
+ *
+ * This file is part of wolfIP TCP/IP stack.
+ *
+ * wolfIP is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * wolfIP is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+ */
+#ifndef WOLF_CONFIG_H
+#define WOLF_CONFIG_H
+
+#ifndef CONFIG_IPFILTER
+#define CONFIG_IPFILTER         0
+#endif
+
+#define ETHERNET
+#define LINK_MTU                1536
+
+#define MAX_TCPSOCKETS          2
+#define MAX_UDPSOCKETS          1
+#define MAX_ICMPSOCKETS         1
+#define RXBUF_SIZE              LINK_MTU
+#define TXBUF_SIZE              LINK_MTU
+
+#define MAX_NEIGHBORS           4
+#define WOLFIP_ARP_PENDING_MAX  2
+
+#ifndef WOLFIP_MAX_INTERFACES
+#define WOLFIP_MAX_INTERFACES   1
+#endif
+
+#ifndef WOLFIP_ENABLE_FORWARDING
+#define WOLFIP_ENABLE_FORWARDING 0
+#endif
+
+#ifndef WOLFIP_ENABLE_LOOPBACK
+#define WOLFIP_ENABLE_LOOPBACK  0
+#endif
+
+#ifndef WOLFIP_ENABLE_DHCP
+#define WOLFIP_ENABLE_DHCP      1
+#endif
+
+/* Static IP fallback (used when DHCP is disabled or times out) */
+#define WOLFIP_IP               "192.168.1.10"
+#define WOLFIP_NETMASK          "255.255.255.0"
+#define WOLFIP_GW               "192.168.1.1"
+#define WOLFIP_STATIC_DNS_IP    "8.8.8.8"
+
+#if WOLFIP_ENABLE_DHCP
+#define DHCP
+#endif
+
+#endif /* WOLF_CONFIG_H */